When you leave your car, detach the device from the magnet by pulling it from the magnetic
hold. You don’t need to detach the magnet from the mount.
Remove CD mount
Note: Use both hands and firm and steady movements when you remove a mount.
1. Detach Car Thing from the mount.
2. Flatten the mount slightly.
3. Gently slide one end of the mount out from the CD slot.
4. Slide the other end out.
Dashboard mount
The dashboard mount sticks onto your car’s dashboard.
Note: The adhesive is very sticky, so choose where to mount before sticking it to your
dashboard. See “Remove dashboard mount” if needed.
1. Attach the magnet to the mount.
Tip: Insert the side opposite the release button on the magnet first. Then press the
button push that side in.
2. Pick the best place for the mount.
Tip: Try different places with the protective strip attached so it doesn’t stick to your
dashboard.
3. Clean the dashboard using the cleaning cloth in your Car Thing box.
4. Peel off the strip to reveal the adhesive.
5. Press firmly for around 30 seconds to stick the mount to your dashboard.
6. Attach Car Thing to the magnet.
You can adjust the angle of Car Thing by turning it on the magnet or by tilting the magnet itself.
When you leave your car, detach the device from the magnet by pulling it from the magnetic
hold. You don’t need to detach the magnet from the mount.
