Sportsman SSWMFDT Manuel utilisateur
SSWMFDT
Stainless Steel
Wall Mount Fold Down Work Table
Assembly Instructions
Max Weight Capacity = 110 Lbs
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER
SERVICE.
If you experience a problem, have questions or need parts for this product, visit our website
http://www.sportsmanseriesbrand.com or call Customer Service at 1-888-287-6981, Monday-Friday,
8 AM - 4 PM Central Time. A copy of the sales receipt is required.
KEEP MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR REFERENCE
PARTS LIST
Check all packaging materials
for any small parts that may
have come loose during
shipping. Before assembly,
locate and identify all parts.
Hex Key
Spanner
1
1
Shelf - 1 Piece
Side Bracket - 2 Pieces
Back Panel - 1 Piece
M4 Screws - 4 Pieces
M8 Screws - 4 Pieces
M8 Nut - 4 Pieces
Fig 3
Fig 5A
Fig 2
Fig 1
Fig 6
Fig 4
Fig 5
Fig 6A
Fig 7
ASSEMBLY INSTRUCTION
WARNING: BE PREPARED FOR TEAM LIFT
WHEN ASSEMBLING/MOVING HEAVY TABLE.
WARNING: SHARP EDGES CAN CAUSE
INJURY. USE CAUTION WHEN
ASSEMBLING/MOVING TABLE.
WARNING: DO NOT SIT OR STAND ON TABLE
OR SHELF.
1. Remove all protective film, taking care to avoid scratching the surface.
2. Unfold both side brackets ［Fig.1］, then attach them to the back panel using
M4 screws［Fig. 2］
3. Position assembled parts onto wall to determine where to drill holes for installing brackets.
4. Attach the assembled parts to the shelf using M8 screws and nuts［Fig.3］
5. Install the shelf onto the wall through the top hole of the bracket using expansion screws.
(Expansion screws not supplied) ［Fig.4］
6. Unfold the shelf ［Fig.5, Fig. 5A ］, attach expansion screws onto the wall［Fig. 6, Fig 6A］
7. Rotate the shelf into locked and unlocked position by aligning with pins. ［Fig.7］
Safety Tips
·Use caution when cleaning or handling to prevent risk of injury from exposed metal edges.
·Do not overload the table or shelf.
Cleaning
·Before use, remove protective film then clean the table.
·Clean the table using a cleaning agent suitable for use with stainless steel and galvanized
surfaces.
·Always remove cleaning agent residues, as this can discolor the surface.
·Never leave any surface damp as this may cause discoloration. Wipe dry thoroughly.
201703
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Sportsman Rangement des outils
Manuels Rangement des outils populaires d'autres marques
Ryobi
Ryobi RWB03 Manuel utilisateur
Husky
Husky H27CH5TR4BGK Manuel utilisateur
Scheppach
Scheppach ts 2100 Manuel utilisateur
Cornwell Tools
Cornwell Tools CTB360AKBK Manuel utilisateur
DIVERSIFIED WOODCRAFTS
DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Manuel utilisateur
Cassese
Cassese CS200 CART Manuel utilisateur
