Sper scientific Food Safety Thermometer Manuel utilisateur

Food Safety Thermometer

800115

Instruction Manual

TABLE OF CONTENTS

INTRODUCTION ...........................................3

FEATURES.....................................................4

MATERIAL SUPPLIED ..................................4

FRONT PANEL DESCRIPTION ...................5

LCD DISPLAY ................................................6

SET UP...........................................................7

MEASUREMENT PROCEDURES..............12

CARE AND MAINTENANCE.......................14

SPECIFICATIONS .......................................15

WARRANTY .................................................16

INTRODUCTION

As the FDA’s requirements for Hazard Analysis

and Critical Control Point (HACCP) in food safety

continue to become more stringent1, Sper Scientic

has responded with the convenient Food Safety

Thermometer (800115) o󰀨ering both a penetration

probe and an infrared thermometer in one portable

convenient unit. With the single push of a button, the

IR thermometer projects a bright white circle, helping

to indicate the measuring area. When compliance

to internal temperature regulations is needed, such

as with prepared meats, sh or poultry, simply

fold out the penetration probe and see the internal

temperature displayed on the large backlit LCD

display. The thermometer o󰀨ers a ashlight feature,

a probe that can extend to several operating angles,

and quickly switches between IR and penetration.

The programmable high and low alarms allow sta󰀨

to successfully spot-check for food safety. The fully

sealed IP65 waterproof housing stands up to the

rigors of food handling, production, and service

helping your establishment meet the FDA’s Food

Safety Requirements.

1: Referring to the Food Safety Modernization Act (FSMA)

updated in January of 2018.

FEATURES

• IP65 waterproof

• HACCP compliant

• High/Low alarm settings

• Flashlight

• Multi-position penetration probe

• Backlit LCD

MATERIALS SUPPLIED

• Food Safety Thermometer

• 2 AAA batteries

• Instruction manual

FRONT PANEL DESCRIPTION

1. Infrared sensor and ashlight

2. LCD screen

3. SCAN button

4. LIGHT/UNIT button

5. SET button

6. Penetration probe

LCD DISPLAY

1. IR Temperature Active Indicator

2. Hold Function Indicator

3. Temperature Unit of Measure

4. Temperature Reading

5. Low Battery Indicator

6. Probe Temperature Active Indicator

7. Low or High Alarm Active

SET UP

Battery Installation

This thermometer uses 2 AAA batteries. To install the

batteries before rst use:

1. Unscrew the single screw on the back of

the thermometer.

2. Remove the battery cover.

3. Insert two new AAA batteries, ensuring

correct polarity.

4. Reinstall the batter cover.

Replace the batteries when the low-battery icon

appears on the LCD.

Note…

Before replacing the batteries, turn the

thermometer o󰀨.

Turning the Thermometer On and O󰀨

There are two ways to turn the thermometer on/o󰀨.

Method One:

1. Press SCAN to turn the thermometer on.

2. The thermometer will turn o󰀨 automatically after

7 seconds of inactivity. This mode is useful for IR

only measurements.

Method Two:

1. Using the thumb notch, fold the penetrating probe

out. This automatically turns the thermometer on.

2. Fold the penetration probe back in to turn it o󰀨.

Changing the Unit of Measure:

1. Turn the thermometer on.

2. Press SET until °C or °F ashes on the LCD above

the last recorded temperature.

3. Press SCAN to toggle between °C and °F.

4. Press SET to conrm. The thermometer will power

o󰀨 and retain your chosen unit of measure.

Setting Audible Alarms

LOW Alarm:

Note…

The LOW alarm activates when the temperature

goes below the programmed temperature. The

LOW alarm sound is di󰀨erent from the high alarm

because it beeps slower. The LOW alarm occurs

at one beep per second while the high alarm is two

beeps per second.

1. Turn the thermometer on.

2. Press SET repeatedly until the icon appears on

the LCD with a number.

3. Adjust the LOW alarm value using the SCAN and

LIGHT buttons.

4. Press SET to conrm.

5. The thermometer will power o󰀨 and save the LOW

alarm setting.

6. Press SET repeatedly until the icon appears on

the LCD with the word on or o󰀨.

7. Press SCAN to choose whether the audible alarm

is on or o󰀨.

8. Press SET to conrm. The thermometer will power

o󰀨 and retain the setting.

HIGH Alarm:

1. Turn the thermometer on.

2. Press SET repeatedly until the icon appears on

the LCD with a number.

3. Adjust the HIGH alarm value using the SCAN and

LIGHT buttons.

4. Press SET to conrm.

5. The thermometer will power o󰀨 and save the HIGH

alarm setting.

6. Press SET repeatedly until the icon appears on

the LCD along with the word on or o󰀨.

7. Press SCAN to choose whether the audible alarm

is active (On) or silent (O󰀨).

8. Press SET to conrm. The thermometer will power

o󰀨 and retain the setting.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sper scientific Thermomètre

Sper scientific

Sper scientific 800103 Manuel utilisateur

Sper scientific

Sper scientific 800113 Manuel utilisateur

Sper scientific

Sper scientific 800101 Manuel utilisateur

Sper scientific

Sper scientific 800103 Manuel utilisateur

Sper scientific

Sper scientific 800004 Manuel utilisateur

Sper scientific

Sper scientific 800105 Manuel utilisateur

Sper scientific

Sper scientific 80008 Manuel utilisateur

Sper scientific

Sper scientific 800036 Manuel utilisateur

Sper scientific

Sper scientific 800002 Manuel utilisateur

Sper scientific

Sper scientific 800101 Manuel utilisateur

Sper scientific

Sper scientific 800043 Manuel utilisateur

Sper scientific

Sper scientific 800110 Manuel utilisateur

Sper scientific

Sper scientific 800117C Manuel utilisateur

Sper scientific

Sper scientific 800024 Manuel utilisateur

Sper scientific

Sper scientific 800012 Manuel utilisateur

Sper scientific

Sper scientific 800043 Manuel utilisateur

Sper scientific

Sper scientific 800024 Manuel utilisateur

Sper scientific

Sper scientific 800118C Manuel utilisateur

Sper scientific

Sper scientific 800005 Manuel utilisateur

Sper scientific

Sper scientific 800025 Manuel utilisateur

Sper scientific

Sper scientific 736690 Manuel utilisateur

Sper scientific

Sper scientific 800108 Manuel utilisateur

Sper scientific

Sper scientific 800022 Manuel utilisateur

Sper scientific

Sper scientific 800023 Manuel utilisateur

Manuels Thermomètre populaires d'autres marques

Delton

Delton 981A Manuel utilisateur

Baker

Baker MM2P Manuel utilisateur

Tarmo

Tarmo 320281 Manuel utilisateur

Citizen

Citizen CTD 504 Manuel utilisateur

TFA

TFA 14.1500 Manuel utilisateur

Vive

Vive DMD1010 Manuel utilisateur

Gotemp

Gotemp THB4002 Manuel utilisateur

GREISINGER

GREISINGER G 1202 Manuel utilisateur

Amprobe

Amprobe TMD-53W Manuel utilisateur

Trotec

Trotec BP10 Manuel utilisateur

Radiance instruments

Radiance instruments RT616 Series Manuel utilisateur

Eurolec

Eurolec IR151 Manuel utilisateur

Scaneo

Scaneo TS42B Manuel utilisateur

Microlife

Microlife NC 200 Mode d’emploi

Motorola

Motorola MBP69SN Guide de configuration

The MeatStick

The MeatStick The MeatStick Manuel utilisateur

Hama

Hama TH35-A Manuel utilisateur

Veridian Healthcare

Veridian Healthcare 09-349 Manuel utilisateur