Spectra POWERBOX 3000C SERIES Manuel utilisateur
USER MANUAL
Version 1.52 – October 2021
Spectra PowerBox 3000C
Series
Spectra GmbH & Co. KG User Manual
Contents
Preface
Revision……………………………………………..……………….……………...……………...05
Copyright Notice.…………………………………………………………………………………...05
Acknowledgement.……………………………………………………………….........................05
Disclaimer.………………………………………………………………….………………...........05
Declaration of Conformity.………………………………………………….……………………06
Product Warranty Statement …………………………………………………………….............06
Technical Support and Assistance.…………………………………………….…………………08
Conventions Used in this Manual …………………………………………….…………............08
Safety Precaution …...……………………………………………….………….………..............08
Package Contents ………………………………………………………….…….………...……10
Ordering Information …………………………………...…………………….…….……...……...10
Chapter 1 Product Introductions
1.1 Overview …………………………………………………….……......……………..............12
1.2 Highlights …………………………………………………….…………....……………........12
1.3 Product Pictures……...……………………………………….……………………..............13
1.4 Key Features …………………..................………………….…………………….…..........13
1.5 Hardware Specification ……………..……………………….……...………………....……14
1.6 System I/O ……………………………………......…………….……………………............15
1.6.1 Front ……………………………………......…………………………………………..15
1.6.2 Rear ………….………………………………….………………………….......………17
1.7 Mechanical Dimension …………………………………….………...………......……........19
Chapter 2 Switches and Connectors
2.1 Location of Switches and Connectors ………….………………………………...………..22
2.1.1 Top View ……………………………….……………………………………...………..22
2.1.2 Bottom View ……………………………………………………………...……............23
2.2 Switches and Connectors Definition…………………..….……………………………….24
2.3 Definition of Switches.……...……………..............................................……..................25
2.4 Definition of Connectors …...….……...……….............……………….............................26
Chapter 3 System Setup
3.1 Removing the Top Cover ……...……………………………….….…………………..........34
3.2 Installing CPU ………………………………………………………………….……………37
3.3 Installing SO-DIMM Memory…………………………………....…………….……………40
3.4 Installing a Mini-PCIe/mSATA Card on Top Side…………………………………..........43
3.5 Installing a Mini-PCIe/mSATA Card on Bottom Side……………..…………………...…45
3.6 Installing Antennas…….…….…………..……….…………………………………………..46
Spectra GmbH & Co. KG User Manual
3.7 Installing a SATA Hard Drive on Top Side…………………………………………………49
3.8 Installing an M.2 Card….…….…………..……….……….…………………………………..51
3.9 Installing a PCI/PCIe Add-on Card (For PB31C+ PB32C only…….……………..……….53
3.10 Assembling the System….……......……….………...….……………………….…............58
3.11 Installing a SATA Hard Drive at Front Side………...….……………………….…............61
3.12 Installing a SIM Card……….……...……….………...….……………………….…............64
3.13 Installing the CMOS Battery.……...……….……...….……………………….…............65
3.14 Fastening the Cover……….……...……….………...….……………………….…............67
3.15 Wall Mount Brackets……….……...……….………...….……………………….…............68
Chapter 4 BIOS Setup
4.1 BIOS Introduction …….……….…………….…….…..….……………………...................71
4.2 Main Setup ……...……….…..……………….…..….………………........…………...........72
4.2.1 System Date …….……………………………………………...……………..............72
4.2.2 System Time ………..……………………………………………..……….................72
4.3 Advanced Setup ……………………………………………………………………………...73
4.3.1 CPU Configuration……..…………….……………………………………………......73
4.3.2 SATA Configuration……..…………………………………………………………......74
4.3.3 PCH-FW Configuration.………………………...……………………….…................75
4.3.4 Trusted Computing……….…………………...……………………………................75
4.3.5 ACPI Settings ………………………………………………………………………….77
4.3.6 F81866 Super IO Configuration……………………………….…………………....78
4.3.7 Hardware Monitor…………..…………………...……………………….…................79
4.3.8 S5 RTC Wake Settings……………………………………………………………....80
4.3.9 Serial Port Console Redirection……………………………………….……..….....80
4.3.10 USB Configuration………….…………………………………………………..........81
4.3.11 Network Stack Configuration……………..……………..……………………..........82
4.3.12 CSM Configuration……..….……….…………………………………………..........82
4.3.13 NVMe Configuration…..….………….…………………………………………........83
4.4 Chipset Setup …...……….…………………..…..….…..…………………………………...84
4.4.1 System Agent (SA) Configuration ……………..……………………………………..84
4.4.2 PCH-IO Configuration ………………….……………………………………………..85
4.5 Security Setup …...……….………………….…..………………..……………………...…88
4.5.1 Administrator Password …….…...……………………………………………………88
4.5.2 User Password …….…………………………………………………..………………88
4.6 Boot Setup …...……….….……………………………...…..….…..………..………….....89
4.7 Save & Exit …...……….….………………….…..….…..………………………..................90
Spectra GmbH & Co. KG User Manual
Chapter 5 Product Application (For DIO Only)
5.1 Digital I/O (DIO) application ………..………………………………………………………92
5.1.1 Digital I/O Programming Guide ……………………………………………………92
5.2 Digital I/O (DIO) Hardware Specification …………………………………………………104
5.2.1 DIO Connector Definition ………………..……...……………..............................105
Chapter 6 Optional Modules Pin Definitions and Settings
6.1 CMI-COM Connector Definition and Settings…………..………………………108
6.2 CMI-M12 Connector Definition and Settings……...…………………………….…110
6.3 CMI-IGN Connector Definition and Settings………………………………………….111
6.4 Installing a Low Speed CMI Module…...…………..……………………………………..112
6.5 Installing a High Speed CMI Module…...…………..……………………………………..115
6.6 Installing a CFM-PoE Module..……….……………………………………………..……..121
6.7 Installing a CFM-IGN Power Ignition Module..……….…………………………………..125
6.8 Installing an External FAN……………………....……….…………………………………..126
6.9 Installing an Internal FAN (For PB-32C only)...…….…………………………………..128
Spectra GmbH & Co. KG User Manual
Preface
Revision
Revision Description Date
1.00 First Release 2018/10/23
1.10 Correction Made 2018/11/20
1.20 Update the Supporting Capacity of Memory 2019/11/08
1.30 Correction Made 2019/12/18
1.40 Add the latest supported processors 2019/12/31
1.41 Correction Made 2020/01/14
1.42 Correction Made 2020/04/09
1.43 New Format Updated 2020/10/22
1.44 Correction Made 2020/11/13
1.45 Correction Made 2021/01/26
1.46 LVD Number Updated 2021/02/17
1.47 Add DC_IN1 Warning 2021/04/20
1.48 Correction Made 2021/05/28
1.49 Correction Made 2021/06/28
1.50 Add PB-3000-LAN-xM12 installation steps 2021/07/26
1.51 Correction Made 2021/08/10
1.52 Correction Made 2021/10/13
Copyright Notice
© 2021 by Spectra GmbH & Co. KG. All rights are reserved. No parts of this manual may be
copied, modified, or reproduced in any form or by any means for commercial use without the
prior written permission of Spectra GmbH & Co. KG. All information and specification
provided in this manual are for reference only and remain subject to change without prior
notice.
Acknowledgement
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.
Disclaimer
This manual is intended to be used as a practical and informative guide only and is subject
to change without notice. It does not represent a commitment on the part of Spectra. This
product might include unintentional technical or typographical errors. Changes are
Spectra GmbH & Co. KG User Manual
6
periodically made to the information herein to correct such errors, and these changes are
incorporated into new editions of the publication.
Declaration of Conformity
FCC
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
CE
The product(s) described in this manual complies with all application European
Union (CE) directives if it has a CE marking. For computer systems to remain
CE compliant, only CE-compliant parts may be used. Maintaining CE
compliance also requires proper cable and cabling techniques.
E-Mark
The "E" mark is based on ECE regulations issued by the Economic
Commission for Europe. It is an organizational part of the UN and the
members are EU countries and many others. Therefore, the acceptance of
approved components is much broader, especially in the eastern part of
Europe. It is necessary to confirm whether a particular country has accepted
(signed) the application of an ECE-regulation; as the application it is not
mandatory for the countries.
Product Warranty Statement
Warranty
Spectra products are warranted by Spectra GmbH & Co. KG to be free from defect in
materials and workmanship starting from the date of purchase by the original purchaser. The
actual warranty period of Spectra products vary with product categories. During the warranty
period, we shall, at our option, either repair or replace any product that proves to be
defective under normal operation.
Defects, malfunctions, or failures of the warranted product caused by damage resulting from
natural disasters (such as by lightening, flood, earthquake, etc.), environmental and
Spectra GmbH & Co. KG User Manual
atmospheric disturbances, other external forces such as power line disturbances, plugging
the board in under power, or incorrect cabling, and damage caused by misuse, abuse, and
unauthorized alteration or repair, and the product in question is either software, or an
expendable item (such as a fuse, battery, etc.), are not warranted.
RMA
Before sending your product in, you will need to fill in a Spectra RMA Request Form and
obtain a RMA number from us. Please go to www.spectra.de/RMA to fill in this form. Our staff
is available at any time to provide you with the most friendly and immediate service.
RMA Instruction
Customers must fill in Spectra Return Merchandise Authorization (RMA) Request
Form and obtain a RMA number prior to returning a defective product to Spectra for
service.
Customers must collect all the information about the problems encountered and
note anything abnormal and describe the problems on the “Spectra Service Form”
for the RMA number apply process.
Charges may be incurred for certain repairs. Spectra will charge for repairs to
products whose warranty period has expired. Spectra will also charge for repairs to
products if the damage resulted from acts of God, environmental or atmospheric
disturbances, or other external forces through misuse, abuse, or unauthorized
alteration or repair. If charges will be incurred for a repair, Spectra lists all charges,
and will wait for customer’s approval before performing the repair.
Customers agree to insure the product or assume the risk of loss or damage during
transit, to prepay shipping charges, and to use the original shipping container or
equivalent.
Customers can be send back the faulty products with or without accessories
(manuals, cable, etc.) and any components from the system. If the components
were suspected as part of the problems, please note clearly which components are
included. Otherwise, Spectra is not responsible for the devices/parts.
Repaired items will be shipped along with a "Repair Report" detailing the findings
and actions taken.
Spectra GmbH & Co. KG User Manual
8
Technical Support and Assistance
1. Visit the Spectra website at www.spectra.de where you can find the latest information
about the product.
2. Contact our technical support team or sales representative for technical support if you
need additional assistance. Please have following information ready before you call:
Product name and serial number
Description of your peripheral attachments
Description of your software (operating system, version, application software, etc.)
A complete description of the problem
The exact wording of any error messages
Conventions Used in this Manual
Safety Precautions
Before installing and using this device, please note the following precautions.
1. Read these safety instructions carefully.
2. Keep this User’s Manual for future reference.
3. Disconnected this equipment from any AC outlet before cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equipment and
must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall
may cause damage.
7. Make sure the voltage of the power source is correct before connecting the equipment
to the power outlet.
Spectra GmbH & Co. KG User Manual
8. Use a power cord that has been approved for using with the product and that it matches
the voltage and current marked on the product’s electrical range label. The voltage and
current rating of the cord must be greater than the voltage and current rating marked on
the product.
9. Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be opened only
by qualified service personnel.
If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it work according to the user's
manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
14. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer.
15. Equipment intended only for use in a RESTRICTED ACCESS AREA.
Spectra GmbH & Co. KG User Manual
Package Contents
Before installation, please ensure all the items listed in the following table are included in the
package.
Item Description Q’ty
1 Embedded System 1
2 Utility DVD Driver 1
3 Heat Sink Pack 1
4 Screw Pack 1
5 Wall Mounting Kit 1
6 Power Terminal Block Connector 1
7 Remote Power On/Off Terminal Block Connector 1
8 Remote Power Reset Terminal Block Connector 1
9 Fan Terminal Block Connector 1
10 DVI-I to VGA Adaptor 1
Note: Notify your sales representative if any of the above items are missing or damaged.
Ordering Information
Model No. Product Description
Spectra
PowerBox 30C*
9/8th Generation Intel® Core™ Series Processors, High
Performance, Expandable and Modular Rugged Embedded
Computer
Spectra
PowerBox 31C*
9/8th Generation Intel® Core™ Series Processors, High
Performance, Expandable and Modular Rugged Embedded
Computer with 1x PCI/PCIe Expansion Slots
Spectra
PowerBox 32C*
9/8th Generation Intel® Core™ Series Processors, High
Performance, Expandable and Modular Rugged Embedded
Computer with 2x PCI/PCIe Expansion Slots
Autres manuels pour POWERBOX 3000C SERIES
1
Table des matières
Autres manuels Spectra Stockage
Spectra
Spectra T200 Mode d’emploi
Spectra
Spectra T Series Manuel utilisateur
Spectra
Spectra T200 Manuel utilisateur
Spectra
Spectra T-Finity Mode d'emploi
Spectra
Spectra T950 Manuel utilisateur
Spectra
Spectra Verde Manuel utilisateur
Spectra
Spectra T200 Manuel utilisateur
Spectra
Spectra T950 Manuel utilisateur
Spectra
Spectra T50e Manuel utilisateur
Spectra
Spectra T50e Manuel utilisateur
Spectra
Spectra T50e Manuel utilisateur
Spectra
Spectra Verde Manuel utilisateur
Spectra
Spectra T950B Mode d'emploi
Spectra
Spectra nTier Verde Array Manuel utilisateur
Spectra
Spectra Stack Tape Library Manuel utilisateur
Spectra
Spectra BlackPearl Manuel utilisateur
Spectra
Spectra BlackPearl Series Manuel utilisateur
Spectra
Spectra T120 Manuel utilisateur
Spectra
Spectra T200 Manuel utilisateur
Spectra
Spectra T50e Manuel
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur