Speco HT-647HRTP Manuel utilisateur
HT-647HRTP
540 Line Color Dome Camera
Wall & Ceiling Mountable
Chameleon Cover Included
Please read this manual thoroughly before operation and keep
it handy for further reference.
PACKAGE CONTENTS
•Please make sure that the following items are included
in the package:
1 HT-647HRTP Camera
4 Mounting Screws
1 Chameleon Dome Cover
1 Video Test Lead
Please leave this manual with the end-user for future
reference.
1
PRECAUTIONS
This dome camera should be only installed by qualified
personnel
To prevent a fire or electrical hazard please use proper power
cable
The dome cover should be treated with care
Do not clean the cover with an abrasive cleaning material-
please use a soft cloth or tissue to clean the dome cover
There are no user-adjustable parts inside. Please do not
disassemble this camera other than to make initial
adjustments.
Please use a UL approved regulated 12-volt DC power supply
Please use appropriate low voltage power cable to prevent fire
or electrical shock.
Please insure that your installation area can support the
weight of the camera.
Please handle this camera carefully:
- Don’t use a strong or abrasive detergent when
cleaning the camera.
- Don’t expose the camera to direct sun
2
CAMERA INSTALLATION
Connections :
1. Apply 12-Volts DC ( constant voltage 300mA or better)
-CONNECT POWER TO THE POWER JACK.
2. CONNECT VIDEO CABLE
-CONNECT BNC CABLE TO THE BNC JACK.
YELLOW:VIDEO OUT
POWER SUPPLY
CONNECT
POWER INPUT:RED
CENTER:(+)
3
CHAMELEON DOME INSTALLATION
3. If desired, place the Chameleon Dome over the HT-647HRTP
* Spray the Chameleon Dome with your desired color
* If necessary apply a second coat
* Painting method on Chameleon Dome
●Notes : If painting is desired, please do so before installation
Push the Chameleon Dome over the HT-647HRTP until it snaps into
position.
4
Features
SLC
When the image is in front of strong background lighting,
your camera allows you to get the clear image.
INTENSIFIER
1/3 inch density CCD and digital processor permit
high quality pictures to be captured in very low light
condition.
High Resolution
Horizontal resolution of 540 TV lines is
achieved by using a SONY Double Speed CCD with
410,000 pixels, yielding pictures with a high S/N ratio..
Motion Detection
Built in motion detector with adjustable areas of coverage will
flash a warning on the screen when motion is detected.
5
OSD
All camera functions are menu driven for easy use.
Dynamic Noise Reduction
The Intensifier camera has a DSP chip that can
remove image noise efficiently showing clean
images in low light conditions.
ELECTRONIC DAY/NIGHT
The Intensifier camera can show color pictures in all lighting
conditions, or you can have it automatically switch to a B/W
picture in low light conditions
The Intensifier camera will work with auto iris, manual iris and
fixed iris lenses.
MANUAL / AUTO IRIS LENS
6
Operating your camera
OSD Function
LENS OPTION
●DC ●MANUAL
SETUP MENU
SHUTTER
●OFF ●F/L ●MANUAL
WHITE BALANCE
●ATW ●AWC MANUAL●
BACKLIGHT
●OFF ●LOW ●MIDDLE ●HIGH
AGC
●OFF ●LOW ●MIDDLE ●HIGH
DNR
●OFF ●LOW ●MIDDLE ●HIGH
SENSE UP
●AUTO ●OFF
NEXT PAGE
●CAMERA ID ●DAY/NIGHT ●SYNC
●MOTION DET ●PRIVACY
●REVERSE
●DETAIL ●DEFAULT ●PAGE1
EXIT
7
OSD Menu Setting
LEFT
DOWN
UP
RIGHT
Push the Joy stick for one second, and the OSD appears
on the screen. Move the Joy Stick up, down, left & right to
control the OSD functions.
8
Operating your camera – SETUP
SET UP menu is displayed on the monitor screen.
1. Press the SET button (JOYSTICK) to access the SETUP mode.
2. Select the desired feature using the UP or DOWN button.
Each time you press the UP or DOWN button, the arrow
indicator moves up or down.
Move the arrow indicator to the desired feature item.
If you press RIGHT or LEFT button, it appears available status.
Press the button when gets desired feature.
3. Change the status of the selected feature using the LEFT
or
RIGHT button.
4. When completed, move the arrow indicator to ‘EXIT" and
press
the SET button.
Notes
You can access submenu using SET button.
For the mode with ‘---’, you may not access submenu.
9
Autres manuels pour HT-647HRTP
2
Table des matières
Autres manuels Speco Caméra de sécurité
Speco
Speco O4T9M Manuel utilisateur
Speco
Speco O2P25X Manuel utilisateur
Speco
Speco O8FB7M Manuel utilisateur
Speco
Speco HT5100BPVFG Manuel utilisateur
Speco
Speco O8VT1 Manuel utilisateur
Speco
Speco CVCM6DC Manuel utilisateur
Speco
Speco VLD1TW Manuel utilisateur
Speco
Speco CVC-340LC Manuel utilisateur
Speco
Speco VL12 Manuel utilisateur
Speco
Speco O4D6N Manuel utilisateur
Speco
Speco CVC-627B Manuel utilisateur
Speco
Speco O4iB2 Manuel utilisateur
Speco
Speco O8B7M Manuel utilisateur
Speco
Speco HT61iLHB Manuel utilisateur
Speco
Speco VL-648IR Manuel utilisateur
Speco
Speco CVC-6700 Series Manuel utilisateur
Speco
Speco HT-7816DNV Manuel utilisateur
Speco
Speco CVC-212PC Manuel utilisateur
Speco
Speco PROVIDEO CVC-3805TP/W Manuel utilisateur
Speco
Speco CVC61iLTB Manuel utilisateur
