Spark MF65+ Manuel utilisateur
1
2
CHECK YOUR SYSTEM REQUIREMENTS
Your Wi-Fi hotspot will connect to any device that supports
Wi-Fi, 802.11 b/g/n
A web browser is required to log in to your Wi-Fi hotspot if you
wish to make any conguraon changes.
USB driverless connecon is also supported for Windows, MAC
and LINUX operang systems:
• Windows 8 (not including RT) / 7 / XP / Vista
• MAC OS X 10.5.11 and above
• Linux
Using the USB connecon requires administrator rights to
install and run the soware.
We suggest you switch o your an-virus soware before
connecting the hotspot - In some cases protection software
can prevent automac installaon.
3
GET TO KNOW YOUR WI-FI HOTSPOT
4
INSERT YOUR SIM CARD
1. Slide the back cover down to access the SIM and memory
card slots.
2. Insert your SIM card carefully as shown:
3. If you want to add a memory card you can do it now. Your
USB device supports up to 32GB microSD(HC)™ memory.
4. Insert the baery with the gold contacts lined up with the
gold springs and slide the cover back on.
5. You are now ready to power up your device and you’ll be
on-line in no me.
5
MICRO SD CARD NOTES
• Adding a memory card is optional to enable shared or
portable storage.
• microSD™ up to 2GB are FAT 16 format.
• microSDHC™ up to 32GB are FAT 32 format.
• A microSD card is NOT included in the box.
POWER UP YOUR WI-FI HOTSPOT
Press and hold the Power key for 3-4 seconds unl the display
lights up.
The Wi-Fi hotspot will start up in a few seconds. Check the
condion of your Wi-Fi hotspot as shown on the display.
6
DISPLAY OVERVIEW
CONNECT DEVICES BY WI-FI
Connect up to ten devices via Wi-Fi:
• Make sure Wi-Fi is switched on, then search for
MF65+_xxxxxx, select this device to connect.
• Consult your display and enter the default security key
using the correct upper and lower case where specied.
Connecon example for Windows 7 computer:
1. On your task bar, next to the clock, click on the Network
Interface icon
2. Click on the Wireless device MF65+_xxxxxx
3. Enter the password exactly as shown on your display
7
4. With Connect Automacally enabled your computer will
remember the password and connect to your Wi-Fi device
when it is on and in range.
TIP
It is also possible to connect via USB connecon. See later for
details.
QUICK REFERENCES
Device home page hp://192.168.0.1
Administrator login password
Default SSID MF65+_xxxxxx.
Shown on the Display.
Default Security Key 10 characters which are case
sensive - Shown on the Display.
Restore defaults
With the device ON:
Press & hold the power key and the
WPS key together and hold for 5
seconds unl you see ‘Reseng’ on
screen.
8
DEVICE HOMEPAGE
Open a browser and go to 192.168.0.1 to access the device
login page.
The default administrator login password is ‘password’.
TIP
Click on Help to view the full User Manual for your Wi-Fi
Hotspot.
9
HOMEPAGE ICONS
TIP – A red SIM card indicates a missing, faulty, or PIN locked
SIM.
CONFIGURE YOUR DEVICE USING THE WEB
INTERFACE
Open a browser and go to 192.168.0.1 to access the device
login page.
The default administrator login password is ‘password’.
Explore the Web Interface and view the Help guide on line for
more ps and examples of how to congure your device.
10
USB CONNECTION
You can also connect your device via the USB lead provided.
The installaon soware is pre-loaded onto your Wi-Fi
Hotspot. Simply insert the device into your computer and
follow the instrucons on-screen.
Example shown below for Windows operang system.
Follow the steps to connect via USB.
1. Click on ‘Open folder…’
Autres manuels pour MF65+
1
Table des matières
Autres manuels Spark Routeur sans fil
