4
02. BASIC OPERATIONS
SWITCH ON BEONCAM
1. Press and hold the Power button for
3 seconds until the red LED lights up.
2. The green LED will blink while the
system boots up. This may take 30
seconds.
3. Once the “See Around You”
welcome message has played,
Beoncam is ready to use.
SWITCH OFF BEONCAM
1. Press and hold the power button for
3 seconds.
2. The notification sound indicates that
Beoncam is switching o.
TAKE A PICTURE
1. Press once on the Image Capture
button. You will hear the notification
sound and the blue LED will flash
once to indicate completion.
RECORD A VIDEO
1. Press the Video Record button once
to start video recording. You will hear
the notification sound and the amber
LED will blink continuously
to indicate record in process.
2. Press the button again and the
amber LED will stop blinking to
indicate recording has finished.
ACTIVATE & DE-ACTIVATE TIME
1. Press the Power button once to
display the time.
2. Press the Power button again to stop
displaying the time.
3. The time will also automatically stop
being displayed after 60 seconds.
