South Insight V2 Manuel utilisateur

Insight V2

- 1 -

Insight V2

Technician Manual

TECHNOLOGY CO., LTD.

Insight V2

- 2 -

Catalogue

ChapterĉPreface........................................................................................................................... 4澳

§1.1 Introduction ..................................................................................................................... 4澳

§1.2 Main Features .................................................................................................................. 4澳

ChapterĊ

Hardware Component............................................................................................... 5澳

§2.1 Bottom Components ........................................................................................................ 5澳

§2.2 Front Components ........................................................................................................... 6澳

§2.3 Basic Operation ............................................................................................................... 6澳

§2.3.1 Check Work Mode ................................................................................................ 6澳

§2.3.2 Power On .............................................................................................................. 7澳

§2.3.3 Power Off.............................................................................................................. 7澳

§2.3.4 Set Work Mode ..................................................................................................... 7澳

§2.3.5 Self-Check ............................................................................................................ 7澳

§2.3.6 Factory Reset ........................................................................................................ 8澳

§2.4 AR Stakeout..................................................................................................................... 8澳

Chapter

Accessories................................................................................................................ 10澳

§3.1 Instrument Case ............................................................................................................. 10澳

§3.2 Charger &Adapter...........................................................................................................11澳

§3.3 UHF Antenna..................................................................................................................11澳

§3.4 Type-C Cable ..................................................................................................................11澳

ChapterČWeb UI Management .................................................................................................. 12澳

§4.1 Overview....................................................................................................................... 12澳

§4.2 Access by WiFi ............................................................................................................. 12澳

§4.3 Access by USB .............................................................................................................. 13澳

§4.4 Web UI main interface ................................................................................................ 16澳

§4.4.1 Status.................................................................................................................. 17澳

§4.4.2 Configuration .................................................................................................... 19澳

§4.4.3 Satellite Information......................................................................................... 27澳

§4.4.4 Data Record....................................................................................................... 28澳

§4.4.5 Data Transfer .................................................................................................... 30澳

§4.4.6 Network Config................................................................................................. 33澳

§4.4.7 Radio Config...................................................................................................... 36澳

§4.4.8 Firmware Update.............................................................................................. 38澳

§4.4.9 Track Manage.................................................................................................... 40澳

§4.4.10 Coordinate System(reserve)........................................................................... 42澳

§4.4.11 Online Service(reserve)................................................................................... 42澳

Insight V2

- 3 -

§4.4.12 User Management ........................................................................................... 43澳

§4.4.13 System log ........................................................................................................ 43澳

Appendix A Insight V2 Technical Specifications ....................................................................... 45澳

Appendix B Key Component Information.................................................................................. 47澳

Appendix C Technical Terms...................................................................................................... 47澳

Appendix D FCC WARNING ................................................................................................. 49澳

Insight V2

ChapterⅠ Preface

Read this chapter, you will have a brief knowledge of SOUTH Company and Insight

V2 measurement system.

§1.1 Introduction

Welcome to SOUTH SURVEYING & MAPPING TECHNOLOGY CO., LTD., which is China’s

leading manufacturer of surveying equipment including GNSS receivers and Total Stations. To

know more about SOUTH, please visit our official website https://www.southinstrument.com//

Our company detailed information is as follows:

Add: South Geo-information Industrial Park, No. 39 Si Cheng Road, Tian He IBD, Guangzhou

510663, China

Tel: +86-20-23380888 Fax: +86-20-23380800

E-mail: mail@southsurvey.com export@southsurvey.com

impexp@southsurvey.com gnss@southsurvey.com

This manual is about Insight V2, to explain how to install, set up and use the RTK system as well

as the accessories. We recommend that you read these instructions carefully before using the

instrument.

§1.2 Main Features

¾AR Stakeout

Stakeout with the real scenes

Visible and convenient

¾Fixed Solution in Seconds

Advanced SoC & ROS make fixed faster

5 constellations 16 bands

50+ satellites used in seconds

¾Durable Battery & Fast Charging

Internal 6800mAh battery, capable of working for 24 hours.

Type-C & PD protocol support fast charging

Power bank supported for long-lasting projects

¾Internal Radio

Better signals receiving

Farlink protocol for long distances communication

Insight V2

§2.2 Front Components

Insight V2 has 3 indicators and one button.

Image

Components

Details

Power Button with

Indicator

Turn on/off the receiver

¾Select work modes and confirm

¾Glow in red when the receiver is on

Bluetooth

Indicator Off--No Bluetooth connection

Glow in blue--Bluetooth connected

Data Indicator

UHF Mode:

Flash at the data receiving intervals

¾WiFi:

Flash

--network dial-

up or WIFI connection (10Hz)

After successful dialing,

flash at the receiving

interval

¾Static Mode˖

Flash per second

--record data

Off

--not record

¾Rover Mode:

Flash in

green--fixed solution;

Flash in

red--receiving corrections but not fixed

solution

Off--no corrections

§2.3 Basic Operation

§2.3.1 Check Work Mode

Press the power button once in the state of power-on, the instrument will prompt with voice

message about the current working mode (for example, “Rover, internal radio mode”). The power

indicator at the bottom show the power. There are four lights and each light represents 25% of the

Insight V2

total power.

§2.3.2 Power On

Press the power button when it is off. When you hear a beep and see all indicators are on, release

the power button to turn on Insight V2.

§2.3.3 Power Off

Press the power button and hold for a while. After 3 beeps and the “Power off” voice prompt at the

third beeping, release the power button, then the instrument will switch off.

§2.3.4 Set Work Mode

Press and hold the power button for about 6 seconds and pass over the state of power off (do not

release the button even if the instrument says “power off”), then V2 will say “start to set work

mode”, at this moment, release the power button, the working mode will be repeated from Rover

to Static.

§2.3.5 Self-Check

Self-check is a useful operation to simply check the main hardware components if the instrument

is not working properly.

Press and hold the power button for about 10 seconds and pass over the state of power off and

mode selection (do not release the button even if the instrument says “power off”and “start to set

work mode”), then V2 will say “start to self-check”, at this moment, release the power button, the

instrument will perform self-check automatically for the modules one by one.

The sequence of modules checking is:

¾OEM board checking

¾UHF module checking

¾Sensors checking

¾WiFi module checking

¾Bluetooth module checking

¾EPPROM checking

If all the modules are normal during self-check, the instrument will get into the state of power-on.

Insight V2

§2.3.6 Factory Reset

Press and hold the power button for about 20 seconds and pass over the foregoing states (“power

off”, “start to set work mode”, “start to self-check”), V2 will get into factory reset progress with

voice message saying “start to restore manufactory default”, at this moment, release the power

button, all the indicators glow and the instrument will perform the factory reset automatically.

After this progress is complete, the instrument will restart with the factory default settings.

§2.4 AR Stakeout

Notice: AR stakeout need to work with a data controller, and it requires the software SurvStar.

AR stakeout is the innovative function of V2. To use this function, you need to have:

9Insight V2

9a data controller (with a SIM card available)

9a pole

9SurvStar software

First, run SurvStar and select Point Stakeout. Choose the point you want to stakeout.

Second, set pole height. Make sure it is consistent with the present pole height.

Insight V2

Third, initiate tilt survey. After successfully initiating, click to start AR stakeout.

Insight V2

Chapterċ

Accessories

§3.1 Instrument Case

The instrument case for Insight V2 contains two layers of packing: the inner layer fills with

anti-collision foam; the host and other accessories can be dispersed and embedded; the outer layer is

a sturdy instrument case, sealing-strong, wear-resistant and anti-wrestling. Compact, durable,

effectively prevent impact; meanwhile, easy to clean.

Table des matières

Autres manuels South GPS

South

South Galaxy G5 Manuel utilisateur

South

South Polar X5 Manuel utilisateur

Manuels GPS populaires d'autres marques

Raven

Raven Cruizer II Manuel

Hama

Hama 53118 Manuel utilisateur

Garmin

Garmin SOUNDER 125 Manuel utilisateur

Garmin

Garmin DEZL 580 Manuel utilisateur

Jigabot

Jigabot EX Manuel utilisateur

Pointer

Pointer Cellocator CelloTrack XT LTE Guide d'installation

Queclink

Queclink GV55LITE Manuel utilisateur

Voxson

Voxson Voxtrack GPS500 Manuel d'instructions

Garmin

Garmin ECHOMAP PLUS Manuel utilisateur

Starcom Systems

Starcom Systems Kylos Compact Manuel utilisateur

Garmin

Garmin 15 H Series Manuel utilisateur

Cobra

Cobra Marine MC 600Ci Manuel utilisateur

Cellocator

Cellocator CelloTrack T Manuel utilisateur

Enfora

Enfora Mini-MT GSM2228UG001 Manuel utilisateur

Magellan

Magellan eXplorist 100 Manuel utilisateur

LTE

LTE G50B Manuel utilisateur

Garmin

Garmin DEZL OTR500 Manuel utilisateur

SkyGolf

SkyGolf SkyCaddie SG1 Manuel utilisateur