Sourcetronic ST2822D Manuel utilisateur

Model ST2822D/E

Dual Handheld LCR Meter

Instruction Manual V.1.0.0

Safety Summary

The following safety precautions are

applicable to both operating and

maintenance personnel and must be

observed during all phases of operation,

service, and repair of this instrument.

DO NOT OPERATE IN A FLAMMABLE OR

EXPLOSIVE ATMOSPHERE

Do not operate the instrument in the

presence of much dust, direct sunlight, high

humidity, strong electromagnetic radiation,

etc.

NON-PROFESSIONALS SHUOLD NOT OPEN

THE REAR COVER

Maintaining, substituting parts or adjusting

the instrument should be made by

professional maintenance personnel. Please

contact relevant distributor or Sourcetronic’s

after-sale service department.

DO NOT REMOVE OR MODIFY THE

INSTRUMENT

Some replacements and unauthorized

modifications might cause irreversible

damage to the instrument.

SAFETY WARNING

Strictly follow the relevant safety statements in

this manual involving safety, personnel injury,

damage to the instrument, operation and

environmental conditions causing poor test.

Safety Guidelines

To ensure that you use this device safely,

follow the safety guidelines listed below:

This meter is for indoor use, altitude up to

2,000 m. For short-time outdoor use,

precautions should be taken to avoid direct

sunlight, water and moisture,

electromagnetic radiation, dust and

explosion.

The warnings and safety precautions should

be read and well understood before the

instrument is used.

Use the meter only as specified in this

manual.

Confirm that the circuits have been powered

off and all capacitors in the circuits been

discharged before measuring in-circuit

components.

Discharge all charging elements, such as

capacitors, before testing.

The power for the meter is supplied with a

single standard 8.4 V battery. But also a line

operation is possible using a power adapter

of 12VDC/150mA. If a power adapter is

selected, please be sure to meet the safety

requirements of a relevant IEC standard.

The battery using in ST2822D/E is

rechargeable. Do not charge non-

rechargeable batteries.

Safety Symbols

This symbol is a warning and

indicates that the user should refer to

the operating instructions located in

the manual.

D C power

Indicates inside pin is positive (+),

outside is negative (-) .

Environmental Conditions

Operating Environment

0 °C to 40 °C

Storage Humidity

0 –80% R.H.

Storage Environment

-20 °C to +50 °C

Pollution degree

Contents

Safety Summary........................................................1

Safety Guidelines......................................................3

Introduction ...............................................................9

Package List ............................................................10

Front Panel Overview .............................................12

Front Panel Display Descriptions..................................13

Front Panel Buttons......................................................15

Button Function Definition.............................................16

LCD Display Overview..................................................17

LCD Display Descriptions.............................................17

Special Display Indicators.............................................20

Test Port.......................................................................21

Powering Instrument ..............................................22

Installing Battery........................................................... 23

Connecting External Power Source..............................25

Low Battery Indication ..................................................27

Backlight Display ..........................................................28

Charge Display.............................................................30

Operation Instruction..............................................32

Data hold mode (HOLD)............................................... 32

Data Record Mode (REC).............................................33

PRI Select Mode...........................................................36

SEC Select Mode .........................................................37

Test Frequency (FREQ)..............................................37

Test Electric Level ........................................................38

Tolerance Mode (TOL) .................................................39

Auto LCR Mode............................................................42

Measurement Rate (RATE) ..........................................44

Series/parallel Equivalent Mode ...................................44

Utility Menu (UTIL)........................................................46

Clear Functions (CLEAR) .............................................61

Remote Control (RMT)................................................66

Fuse Detection.............................................................. 66

Quick Start Guide....................................................68

CAUTION......................................................................68

Inductance Measurement .............................................69

Capacitance Measurement...........................................72

Resistance Measurement.............................................74

Impedance Measurement.............................................77

Direct Current Resistance Measurement......................78

Remote Communication.........................................78

Connecting Instrument to PC........................................79

Virtual Serial Port Configuration....................................81

RMT Operation.............................................................82

Command Protocols .....................................................84

Specifications..........................................................99

General Specifications................................................100

Accuracy Specifications..............................................104

Maintenance ..........................................................114

Service........................................................................114

Cleaning......................................................................115

Limited Warranty...................................................116

Introduction

ST2822D/E is designed for measuring inductance,

capacitance and resistance of components. The

instrument can be powered by an 8.4V rechargeable

battery or external power adapter. This meter is not

only applicable to the application occasion of bench

meters but also conveniently used in the flow and

handheld measurement occasions.

ST2822D/E provides the primary parameter of up to

40,000 readings, secondary parameter of 0.0001

reading resolution, maximum measuring frequency up

to 100kHz, constant internal resistance of 100Ωand

three optional testing levels. The auto range can

rapidly display the measuring results and

automatically choose the desirable testing parameters

in accordance with components properties. Its

measuring accuracy is unimaginable up to 0.1%.

Front panel push buttons maximize the convenience

of function, such as FREQ, LEV, TOL and RATE.

Tolerance mode can sort components, record mode

aid to capture readings, convenient open/short clear

function improve the measuring accuracy, utility menu

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sourcetronic Instrument de mesure

Sourcetronic

Sourcetronic ST2684A Manuel utilisateur

Sourcetronic

Sourcetronic ST2516 Manuel utilisateur

Sourcetronic

Sourcetronic MPK-2000e Manuel utilisateur

Sourcetronic

Sourcetronic ST2822 Manuel utilisateur

Sourcetronic

Sourcetronic TH2516 Series Manuel utilisateur

Sourcetronic

Sourcetronic ST2515 Manuel utilisateur

Sourcetronic

Sourcetronic ST1778A Manuel utilisateur

Sourcetronic

Sourcetronic ST2683A Manuel utilisateur

Sourcetronic

Sourcetronic ST2829A Manuel utilisateur

Sourcetronic

Sourcetronic MPK-102e Manuel utilisateur

Sourcetronic

Sourcetronic ST2638 Series Manuel utilisateur

Sourcetronic

Sourcetronic MPK-204e Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur