Charging | 1110 | Use with Mobile Phone
Mobile Phone Use
Your SoundGear devices are designed to
work with a smartphone� When SoundGear
devices are powered on and paired with an
MFi-compatible iOS device or an ASHA-
compatible Android device, incoming phone
calls and other audio will route automatically
to your SoundGear devices� When your
SoundGear devices are not powered on,
incoming calls route only to your smartphone�
iOS allows you to select a preference for how
audio (call audio and media audio) is routed
from your smartphone to your SoundGear
devices�
Microphone Use while Streaming
When an audio stream starts, the
microphones on your SoundGear devices
will automatically mute� The microphone
volume will go back to the previous settings
when the audio stream stops� To modify the
microphone volume while streaming, simply
use rotary volume control on your SoundGear
device� For iOS devices, you can also use the
native iOS controls�
For any questions related to microphone
function or control while streaming, please
contact SoundGear Customer Support for
assistance�
Charging Your SoundGear Devices
• Place your SoundGear devices in the
charger with the charging contacts
touching the charging posts
• Your SoundGear devices will turn off
automatically and begin to charge
• Note: The LEDs corresponding to each
SoundGear device:
– Glowing Green = Charging
– Solid Green = Fully Charged*
– Blinking Red = Fault State – Remove
from charger, wait until LED turns off
and re-insert devices� If Fault State
continues, call your SoundGear dealer
or SoundGear Customer Support�
• Charging occurs with the lid open or
closed
*If you are charging without the cord, the LEDs will turn off when charged,
to save battery.
