Sound Sation DSKIT-7 Manuel utilisateur
2
Dear customer,
First of all thanks far purchasing a SOUNDSATION® product. Our mis-
sion is to satisfy all possible needs of musical instrument and profes-
sional audio and lighting users oering a wide range of products using
the latest technologies.
We hope you will be satised with this item and, if you want to collab-
orate, we are looking for a feedback from you about the operation of
the product and possible improvements to introduce in the next future.
Go to our website www.soundsationmusic.com and send an e-mail
with your opinion, this will help us to build instruments ever closer to
customer’s real requirements.
One last thing: read this manual before using the instrument, an incor-
rect operation can cause damages to you and to the unit. Take care!
The SOUNDSATION Team
Gentile cliente,
Grazie per aver scelto un prodotto SOUNDSATION®. La nostra missione
è quella di orire ai nostri utenti una vasta gamma di strumenti musicali
ed apparecchiature audio con tecnologie di ultima generazione.
Speriamo di aver soddisfatto le vostre aspettative e, se voleste collabo-
rare, saremmo lieti di ricevere un vostro feedback sulla qualità del pro-
dotto al ne di migliorare costantemente la nostra produzione. Visitate
il nostro sito www.soundsationmusic.com ed inviateci una mail con la
vostra opinione, questo ci aiuterà a sviluppare nuovi prodotti quanto più
vicini alle vostre esigenze.
Un’ultima cosa, leggete il presente manuale al ne di evitare danni alla
persona ed al prodotto, derivanti da un utilizzo non corretto
Il Team SOUNDSATION
3
TABLE OF CONTENTS
1. INTRODUCTION......................................................... page 4
2. FEATURES ................................................................... page 4
3. PACKAGE CONTENTS ................................................ page 5
4. CONNECTION AND SETUP ....................................... page 6
5. STORAGE .................................................................... page 6
6. CM-1000 Condenser Microphone ........................... page 6
6.1. CM-1000 Technical Specication................................................. page 7
6.2. CM-1000 Freq. Response Graph.................................................. page 7
6.3. CM-1000 Polar Pattern Chart ........................................................ page 8
7. BDM-30 Microphone ................................................ page 9
7.1. BDM-30 Technical Specication................................................... page 9
7.2. BDM-30 Freq. Response Graph.................................................... page 9
7.3. BDM-30 Polar Pattern Chart........................................................ page 10
8. TTM-30 Microphone ............................................... page 11
8.1. TTM-30 Technical Specication.................................................. page 11
8.2. TTM-30 Freq. Response Graph................................................... page 11
8.3. TTM-30 Polar Pattern Chart......................................................... page 12
9. DSKIT-7Specication ............................................. page 12
10. WARRANTY AND SERVICE ..................................... page 13
11. WARNING................................................................. page 14
4
1. INTRODUCTION
New Soundsation DSKIT-7 is a prime solution to mike your
acoustic drum-set. New reduced size designed microphones
give them a better cosmetic appeal and discretion in com-
parison to the used drum-set. Ideal for modern drummers,
this kit gives max reliability both live performances and stu-
dio recording applications. Each microphone mounts a high
quality capsule and its frequency response has been optimized
according to the drum instrument to mike (snare, tom, bass
drum, cymbals). DSKIT-7 includes supports for various types of
microphone and comes with a ight case for easy transport.
2. FEATURES
fIdeal for drums (Bass Drum, Snare Drum, Tom Drum, Cym-
bals) in live performances and studio recording applications
fHigh Quality Head-grilles microphones.
fHigh Sensitivity and Low Self-Noise
fSatin Black
fRugged Body construction
fIncludes rugged ight case, windscreen lters for CM-1000
model and holders for all microphones of the kit.
5
3. PACKAGE CONTENTS
Your DSKIT-7 was carefully packed to ensure safe transport. De-
spite this, we recommend you to carefully examine the package
and its contents for any signs of physical damage, which can
occur during transport. In the package there are the following
items:
1 x BDM-30 4 x TTM-30 2 x CM-1000
1 x Case
2 x Windscreen
2 x Mic Support
5 x Mic Clip 4 x Mic Clamp
(CM-1000)(TTM-30)(BDM-30 / TTM-30)
(CM-1000)
6
4. CONNECTION AND SETUP
Use a 3-pin XLR audio cables to connect microphones to the
mixer (or other preamp board). After having placed the micro-
phones, start adjusting sound on your mixer by setting to ‘OFF’
or ‘FLAT’ the relative channels EQ rst. Then use EQ, reverb,
echo or any signal processing to create special eects, accord-
ing to your creative idea.
5. STORAGE
After use, remove eventually the windscreen lters (in CM-1000)
and supports, wipe them with a clean cloth and place in the
supplied ight-case. In any case, please be noticed that con-
denser capsule (CM-1000) is extremely sensitive to moisture. So,
if the microphones is being used regularly, we strongly suggest
you to cover them with a protective cloth.
6. CM-1000 Condenser Microphone
CM-1000 is a professional condenser microphone with wide
frequency response and high frequency resolution. It is ideal for
cymbals (Hi-Hat, Ride, Crash, Etc.) and requires Phantom Power
of 9V to 52V.
Connect CM-1000 to the mixer (or other preamp board) before
applying power, and never remove the cable while the pow-
er is connected. If the mixer or preamp does not contain this
phantom power requirement, then an external phantom power
supply is needed
7
6.1. CM-1000 Technical Specification
Transducer Principle: Condenser
Directivity Characteristic Cardiod
Frequency Response: 20Hz – 20kHz
Sensitivity: -38dB ± 3db
Load impedance ≥ 1000 Ohm
Output Impedance: ≤ 100 Ohm
Self-Noise: 25dB A
Max Input SPL: 135dB (at 1kHz ≤1% T.H.D.)
Phantom Power: 9V ÷ 52V
Mic. Size ( Ø ; Length ): 20 mm ; 129 mm
Mic. Weight: 107 g
6.2.CM-1000 Freq. Response Graph
8
6.3.CM-1000 Polar Pattern Chart
9
7. BDM-30 Microphone
BDM-30 is a Bass drum microphone with full low frequency
response for strong and dynamical bass eect pick up.
7.1. BDM-30 Technical Specification
Transducer Principle: Dynamic
Directivity Characteristic Cardiod
Frequency Response: 20Hz – 16kHz
Sensitivity: -69dB ± 3db
Output Impedance: 150 Ohm±30%
Mic. Size ( Ø ; Length ): 52 mm ; 109 mm
Mic. Weight: 288 g
7.2. BDM-30 Freq. Response Graph
10
7.3. BDM-30 Polar Pattern Chart
Table des matières
Langues :
Autres manuels Sound Sation Système de microphone
Sound Sation
Sound Sation WF-D190 Manuel utilisateur
Sound Sation
Sound Sation WF-V11 Manuel utilisateur
Sound Sation
Sound Sation WF-D190H MKII Manuel utilisateur
Sound Sation
Sound Sation WF-U1300 Manuel utilisateur
Sound Sation
Sound Sation WF-U2600 Manuel utilisateur
Sound Sation
Sound Sation WF-U216-A2 Manuel utilisateur
Sound Sation
Sound Sation WF-U2300 Series Manuel utilisateur
Sound Sation
Sound Sation WF-D290 MKII-A2 Manuel utilisateur
Sound Sation
Sound Sation WF-D290 Manuel utilisateur
Sound Sation
Sound Sation OnAir Manuel utilisateur
Manuels Système de microphone populaires d'autres marques
Sennheiser
Sennheiser Evolution Wireless Digital EW-DX EM 2 Manuel utilisateur
Alpha Technologies
Alpha Technologies RBMS Manuel utilisateur
SWIT Electronics Co.,LTD.
SWIT Electronics Co.,LTD. CW-S150 Manuel utilisateur
Shure
Shure UA844 Manuel utilisateur
Panasonic
Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manuel utilisateur
Pyle
Pyle PDWM5000 Manuel utilisateur