Sony Trinitron Manuel utilisateur
1996 by Sony Corporation
Operating Instructions EN
3-858-251-12 (1)
Trinitron Color
Video CD TV
####
####
####
RF
A
C##
KVD-C21MF1
f
Getting Started
2-EN
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
The following caution label is located inside of the unit.
Disc logo
Contents
Disc size
Play time
This unit can play following discs:
CD-G
(CD graphics)
Audio + Video
(still pictures)
12cm/8cm
74 min./20 min.
Note on VIDEO CDs
This TV conforms to Ver. 1.1 and Ver. 2.0 of VIDEO CD standards.
You can enjoy two kinds of playback according to the discs.
Disc type
VIDEO CDs without PBC*
functions (Ver. 1.1 discs)
VIDEO CDs with PBC*
functions (Ver. 2.0 discs)
You can
Enjoy video playback (moving
pictures) as well as music.
Play interactive software using
menu screens displayed on the
TV screen, in addition to the
video playback function of Ver
1.1 discs.
VIDEO CDs
Audio + Video
(moving pictures)
12cm/8cm
74 min./20 min.
Audio CDs
Audio
12cm/8cm
(CD single)
74 min./20
min.
f
* PBC: Playback control
EN
Getting Started 3-EN
MENU
ENTER
MENU
VISUAL MODE
PROGRAM PRESET
LANGUAGE /
DISC COLOR SYSTEM
Select and press ENTER
PROGRAM PRESET
AUTO PROGRAM
MANUAL PROGRAM
ENTER
AUTO PROGRAM
SYSTEM
B / G
and press ENTER
PROG CH
I
D / K
M
–– –––
–– –––
–– –––
–– –––
123
456
789
10
0
ENTER
ENTER
and pressSelect
Select
POWER
TV
Getting Started
4-EN
ill005 9
EN
Getting Started 5-EN
Table of Contents
Getting Started
6Connections
8Presetting channels
TV Operations
11 Watching the TV
CD Operations
13 Playing CDs
Karaoke Operations
17 Karaoke sing-along
Additional Operations
19 Using the Sleep Timer
19 Using the Wake Up timer
20 Adjusting the picture mode
21 Muting the sound
21 Listening with headphones
Additional Information
22 Troubleshooting
23 Notes on CDs
24 Receivable channels and channel display
24 Specifications
25 Index to parts and controls
Precautions
•Operate the TV only at 110-240 V AC.
•Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
•Do not block the ventilation openings.
•Do not install the TV in a confined space, such as a
bookcase or built-in cabinet.
•Do not install the TV in an inclined position.
•Do not install the TV in locations where it is;
-Extremely hot or cold
-Dusty or dirty
-Very humid
-Vibrating
-Subject to direct sunlight
•Do not keep the TV plugged in if you are not going to
use it for several days.
•Do not pull the power cord to disconnect the TV. Pull
it out by the plug.
Getting Started
6-EN
Connections
Connecting a VHF antenna or a combination VHF/UHF antenna
— 75-ohm coaxial cable (round)
Attach an optional IEC antenna connector to the 75-ohm coaxial cable.
Plug the connector into the ˘(antenna) socket at the rear of the TV.
Connecting optional equipment
You can connect optional audio/video equipment to your TV such as a VCR, multi disc player, camcorder, video
game or stereo system.
Connecting video equipment using video input jacks
Rear of TV
When connecting a monaural VCR
Connect the yellow plug to VIDEO and the black plug to
AUDIO-L (MONO).
Rear of TV Rear of TV
Getting Started
On a wall
or
VIDEO 1 IN
VIDEO OUT
AUDIO VIDEO
R L(MONO)
VIDEO 1 IN
to antenna socket : Signal flow
to antenna
output
to video
and audio
outputs
VCR
EN
Getting Started 7-EN
VIDEO 2 IN
VIDEO L
(MONO)
-AUDIO-R
: Signal flow
CamcorderFront of TV
to video and
audio outputs
Connecting audio/video equipment using VIDEO OUT jacks
Rear of TV
When recording through the VIDEO OUT jacks
If you change the channel or video input while recording with a
VCR, the channel or video input you are recording also will be
changed.
To prevent the TV from falling
Stabilize the TV in either of the following ways.
•
With the supplied screws, attach the band to the TV
stand and to the rear of the TV using the hole provided
on the TV.
•Put the cord or chain through the clamps to stabilize
the TV against a wall or pillar.
VIDEO 1 IN
VIDEO OUT
AUDIO VIDEO
R L(MONO)
: Signal flow
to antenna
socket
to video and
audio inputsVIDEO OUT
to antenna
output VCR
Getting Started
8-EN
4Press ›or ¢to select “PROGRAM PRESET”
and press ENTER.
The PROGRAM PRESET menu appears.
5Press ›or ¢to select “AUTO PROGRAM”
and press ENTER.
The AUTO PROGRAM menu appears.
6Press ›or ¢to select the TV system (B/G, I,
D/K or M) of the channels which you want
to preset, and press ENTER.
Presetting starts from program position 1. The
preset program and channel numbers are displayed
on the screen in sequence.
When presetting is finished, the program position
from which presetting starts appears. All available
channels are now stored on successive number
buttons.
To preset channels automatically using
the TUNER PRESET button on the TV.
1Press POWER to switch it on.
2Press TUNER PRESET with a pointed object.
The following display appears.
3Using VCD MENU +/–, move the cursor (”) to
the TV system (B/G, I, D/K or M) of the
channels which you want to preset.
4Press RETURN.
Presetting starts from program position 1.
When presetting is finished, the program position
from which presetting starts appears.
PROGRAM PRESET
AUTO PROGRAM
MANUAL PROGRAM
and press ENTER
Select
MENU
VISUAL MODE
PROGRAM PRESET
LANGUAGE /
DISC COLOR SYSTEM
and press ENTER
Select
Presetting channels automatically
You can preset 80 TV channels in numerical sequence
from program position 1.
Front of TV
1Press POWER.
When the TV is in standby mode after pressing
POWER, press POWER on the remote commander.
2Press TV.
3Press MENU.
The main menu appears.
Presetting channels
RETURN
VCD MENU+/–
TUNER PRESET
1
123
456
789
10
0
2
3
4, 5, 6
POWER
TV
TUNER PRESET
SYSTEM
B / G PROG CH
I
D / K
M
–– –––
–– –––
–– –––
–– –––
P–
/
+
V
sser UNEMDC n,oitcelesmetsysrof t.ratsotNRUTER
AUTO PROGRAM
SYSTEM
B / G PROG CH
I
D / K
M
–– –––
–– –––
–– –––
–– –––
and press ENTER
Select
EN
Getting Started 9-EN
7Repeat steps 4 to 6 to preset other
channels.
8After you finish presetting, press MENU to
go back to the original screen.
If you have made a mistake
Press ?to go back to the previous position.
Skipping program positions
You can skip unused program positions when
selecting program with the PROGR +/– buttons.
However, the skipped programs may still be called up
when you select them with the number buttons.
1Press MENU.
The main menu appears.
2Press ›or ¢to select “PROGRAM PRESET”
and press ENTER.
The PROGRAM PRESET menu appears.
3Press ›or ¢to select “MANUAL PROGRAM”
and press ENTER.
The MANUAL PROGRAM menu appears.
4Press ›or ¢to select the program position
which you want to skip and press ENTER.
The “SYS” position turns red.
5Press ›or ¢until “---” appears in the “SYS”
position and press ENTER.
When you select programs using the PROGR +/–
buttons, the program position is skipped.
6Repeat steps 4 and 5 to skip other program
positions.
7Press MENU to go back to the original
screen.
MANUAL PROGRAM
1
and press ENTER
PRG SYS CH LABEL AFT
B/G C04 ––––– ON
2 B/G C05 ––––– ON
3 B/G C09 ––––– ON
4 B/G C12 ––––– ON
5 B/G C21 ––––– ON
6 B/G C25 ––––– ON
Select
MANUAL PROGRAM
1
and press ENTER
PRG SYS CH LABEL AFT
B/G C04 ––––– ON
2 B/G C05 ––––– ON
3 B/G C09 ––––– ON
4 B/G C12 ––––– ON
5 B/G C21 ––––– ON
6 B/G C25 ––––– ON
Select
MANUAL PROGRAM
1
and press ENTER
PRG SYS CH LABEL AFT
B/G C04 ––––– ON
2 B/G C05 ––––– ON
3 B/G C09 ––––– ON
4 B/G C12 ––––– ON
5 B/G C21 ––––– ON
6 B/G C25 ––––– ON
Select
PROGRAM PRESET
AUTO PROGRAM
MANUAL PROGRAM
Presetting channels manually
To change the channel for a particular program
position or to receive a channel with a weak signal,
preset the channel manually.
1Press MENU.
The main menu appears.
2Press ›or ¢to select “PROGRAM PRESET”
and press ENTER.
The PROGRAM PRESET menu appears.
3Press ›or ¢to select “MANUAL PROGRAM”
and press ENTER.
The MANUAL PROGRAM menu appears.
4Press ›or ¢to select the program position
(number button) to which you want to
preset a channel, and press ENTER.
The “SYS” position turns red.
For program positions
beyond 6
This display scrolls by
pressing ›repeatedly.
5Select the TV broadcast system (B/G, I, D/K
or M) with ›or ¢, and press ENTER.
The CH number turns red.
6
Search for the channel with ›(down) or ¢(up).
The channel number starts counting up or down.
When a channel is found, it stops.
If you want to preset this channel, press ENTER. If
not, press with ›or ¢to search for another channel.
You can also select the channel number directly
with the number buttons. Press C (once for regular
channels, twice for cable channels), number buttons
(e.g. For 06 press 0 and 6), then ENTER.
1 2 3
4 5 6
7 8 9
10
0
– /– – C
MANUAL PROGRAM
1
and press ENTER
PRG SYS CH LABEL AFT
B/G C04 ––––– ON
2 B/G C05 ––––– ON
3–C09 ––––– ON
4B / G C12 ––––– ON
5 B/G C21 ––––– ON
6 B/G C25 ––––– ON
––
Select
Getting Started
10-EN
MANUAL PROGRAM
1
and press ENTER
PRG SYS CH LABEL AFT
B/G C04 ––––– ON
2 B/G C05 ––––– ON
3 B / G C0 9 MTV – – ON
4 B/G C12 ––––– ON
5 B/G C21 ––––– ON
6 B/G C25 ––––– ON
Select
MANUAL PROGRAM
1
and press ENTER
PRG SYS CH LABEL AFT
B/G C04 ––––– ON
2 B/G C05 ––––– ON
3 B/G C09 ––––– ON
4 B/G C12 ––––– ON
5 B/G C21 ––––– ON
6 B/G C25 ––––– ON
Select
MANUAL PROGRAM
1
and press
Select ENTER
PRG SYS CH LABEL AFT
B/G C04 ––––– ON
2 B/G C05 ––––– ON
3 B/G C09 ––––– ON
4 B/G C12 ––––– –
5 B/G C21 ––––– ON
6 B/G C25 ––––– ON
3
Manual fine-tuning
Normally, the automatic fine-tuning (AFT) is already
working. However, if the picture of a program is
distorted, you can use the manual fine-tuning function
to obtain better picture reception.
1Press MENU.
The main menu appears.
2Press ›or ¢to select “PROGRAM PRESET”
and press ENTER.
The PROGRAM PRESET menu appears.
3Press ›or ¢to select “MANUAL PROGRAM”
and press ENTER.
The MANUAL PROGRAM menu appears.
4Press ›or ¢to select the program position
corresponding to the channel which you
want to manually fine-tune, and press
ENTER repeatedly until the AFT position
turns red.
5Fine-tune the channel with ›or ¢so that
you get the best TV reception. As you press
these buttons, the frequency changes from
-15 to +15.
6After fine-tuning, press ENTER.
The cursor appears beside the program position.
Now the fine-tuned level is stored.
7Repeat steps 4 to 6 to fine-tune other
channels.
8Press MENU to go back to the original
screen.
Captioning a station name
You can name a channel using up to five characters
(letters or numbers) to be displayed on the TV screen
(e.g. MTV). Using this function, you can easily identify
which channel you are watching.
1Press MENU.
The main menu appears.
2Press ›or ¢to select “PROGRAM PRESET”
and press ENTER.
The PROGRAM PRESET menu appears.
3Press ›or ¢to select “MANUAL PROGRAM”
and press ENTER.
The MANUAL PROGRAM menu appears.
4Press ›or ¢to select the program position
you want to caption and press ENTER
repeatedly until the first element of the
“LABEL” position turns red.
5Select a letter or number with ›or ¢and
press ENTER.
The next element turns red. Select other characters
in the same way. For the element you want to leave
blank, select “-” and press ENTER.
6After selecting all the characters, press
ENTER repeatedly until the cursor appears
again. Now the caption you chose is stored.
7Repeat steps 4 to 6 to caption other
channels.
8Press MENU to go back to the original
screen.
MANUAL PROGRAM
1
and press ENTER
PRG SYS CH LABEL AFT
B/G C04 ––––– ON
2 B/G C05 ––––– ON
3 B/G C09 ––––– ON
4 B/G C12 ––––– ON
5 B/G C21 ––––– ON
6 B/G C25 ––––– ON
Select
Autres manuels pour Trinitron
8
Table des matières
Autres manuels Sony TV
Sony
Sony BRAVIA XBR-85X950G Manuel utilisateur
Sony
Sony FD Trinitron WEGA KV-36HS510 Instructions d'installation
Sony
Sony Trinitron KV-HW212 Manuel utilisateur
Sony
Sony Bravia KDL-19M4000 Manuel utilisateur
Sony
Sony KV-HR32K90 Manuel utilisateur
Sony
Sony Trinitron KV-27V42 Instructions d'utilisation
Sony
Sony FD TRINITRON WEGA KV-20FS12 Manuel utilisateur
Sony
Sony TRINITRON KV-27V65 Manuel utilisateur
Sony
Sony KV-BT212M80 Manuel utilisateur
Sony
Sony FD Trinitron WEGA KV-32FS12 Manuel utilisateur
Sony
Sony KV-ES29N90 Manuel utilisateur
Sony
Sony Trinitron KD-32DX100U Manuel utilisateur
Sony
Sony TRINITRON KV-25X5A Manuel utilisateur
Sony
Sony Bravia KDL-50W650A Manuel utilisateur
Sony
Sony BRAVIA KD-43X7500F Manuel utilisateur
Sony
Sony Trinitron KV-32CX10 Manuel utilisateur
Sony
Sony TRINITRON KV-X2581A Manuel utilisateur
Sony
Sony FD Trinitron KV-29LS40B Manuel utilisateur
Sony
Sony KD-50X8 TK Series Manuel utilisateur
Sony
Sony KDS-50A3000 - Bravia Sxrd Microdisplay Hdtv Manuel utilisateur
Manuels TV populaires d'autres marques
Philips
Philips Colour Television Manuel utilisateur
Toshiba
Toshiba 27A10 Manuel utilisateur
Philips
Philips 42PF9630A/37 Manuel utilisateur
Hitachi
Hitachi 32FX48B Manuel utilisateur
DAEWOO ELECTRONICS
DAEWOO ELECTRONICS DTQ-14V1FC Manuel utilisateur
Changhong Electric
Changhong Electric uhd55b6000is Manuel utilisateur
