Sony DCU-8000 Manuel utilisateur

INSTALLATION MANUAL

1st Edition

DEVICE CONTROL UNIT PACK

DCU-8000

MKS-8700

DEVICE CONTROL UNIT

HK-PSU03

MKS-8701

MKS-8702

DCU-8000 IM

MKS-8700 Serial No. 10001 and Higher

HK-PSU03 Serial No. 10001 and Higher

MKS-8701 Serial No. 10001 and Higher

MKS-8702 Serial No. 10001 and Higher

!WARNING

This manual is intended for qualified service personnel only.

To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that

contained in the operating instructions unless you are qualified to do so. Refer all servicing to

qualified service personnel.

!WARNUNG

Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.

Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die

Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei

Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben

Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung

dazu besitzen.

!AVERTISSEMENT

Ce manual est destiné uniquement aux personnes compétentes en charge de l'entretien. Afin de

réduire les risques de décharge électrique, d'incendie ou de blessure n'effectuer que les

réparations indiquées dans le mode d'emploi à moins d'être qualifié pour en effectuer d'autres.

Pour toute réparation faire appel à une personne compétente uniquement.

DCU-8000 IM

Attention-when the product is installed in Rack:

1. Prevention against overloading of branch circuit

When this product is installed in a rack and is

supplied power from an outlet on the rack, please

make sure that the rack does not overload the supply

circuit.

2. Providing protective earth

When this product is installed in a rack and is

supplied power from an outlet on the rack, please

confirm that the outlet is provided with a suitable

protective earth connection.

3. Internal air ambient temperature of the rack

When this product is installed in a rack, please make

sure that the internal air ambient temperature of the

rack is within the specified limit of this product.

4. Prevention against achieving hazardous

condition due to uneven mechanical loading

When this product is installed in a rack, please make

sure that the rack does not achieve hazardous

condition due to uneven mechanical loading.

5. Install the equipment while taking the operating

temperature of the equipment into consideration

For the operating temperature of the equipment, refer

to the specifications of the Operation Manual.

6. When performing the installation, keep the rear of

the unit 10 cm (4 inches) or more away from walls

in order to obtain proper exhaust and radiation of

heat.

When using a LAN cable:

For safety,do not connect to the connector for

peripheral device wiring that might have excessive

voltage.

1 (P)

DCU-8000 IM

Table of Contents

Manual Structure

Purpose of this manual .............................................................................................. 3

Related manuals ......................................................................................................... 3

Contents ..................................................................................................................... 3

1. Installation

1-1. Operating Environment ............................................................................... 1-1

1-2. Power Supply .............................................................................................. 1-1

1-2-1. Power Specifications .................................................................. 1-1

1-2-2. Recommended Power Cord ........................................................ 1-1

1-3. Installation Space (External dimensions) ................................................... 1-2

1-4. Installing the Options .................................................................................. 1-3

1-4-1. Installing the Plug-in Boards ...................................................... 1-4

1-4-2. Installing the Connector Board .................................................. 1-5

1-4-3. Installing the HK-PSU03 ........................................................... 1-6

1-5. Rack Mounting ............................................................................................ 1-7

1-6. Matching Connectors and Cables................................................................ 1-9

1-7. Input/Output Signals of Connectors .......................................................... 1-10

1-7-1. MKS-8700 ................................................................................ 1-10

1-7-2. MKS-8701 ................................................................................ 1-12

1-7-3. MKS-8702 ................................................................................ 1-15

1-8. Checks on Completion of Installation ....................................................... 1-16

1-8-1. Description of On-board Switches and LEDs .......................... 1-16

1-9. System Connection .................................................................................... 1-22

2. Service Overview

2-1. Troubleshooting .......................................................................................... 2-1

2-2. Periodic Inspection and Maintenance ......................................................... 2-3

2-2-1. Cleaning ..................................................................................... 2-3

DCU-8000 IM

Purpose of this manual

This manual is the installation manual of Device Control Unit Pack DCU-8000 and

the optional boards and units.

This manual is intended for use by trained system and service engineers, and

describes the information on installing the DCU-8000.

Related manuals

The following manuals are prepared for DCU-8000 and the optional boards and

units.

.Operation Manual (Supplied with DCU-8000)

This manual describes the application and operation of DCU-8000.

.System Setup Manual (Available on request)

This manual describes the information that is required to connect the MVS-8xxx/

MVE-8000/DCU-8000/CCP-8000 to the MVS-8000 system, and to start up the

system.

.Maintenance Manual (Available on request)

This manual describes the detailed service information.

If this manual is required, please contact your local Sony Sales Office/Service

Center.

.“Semiconductor Pin Assignments” CD-ROM (Available on request)

This “Semiconductor Pin Assignments” CD-ROM allows you to search for

semiconductors used in B&P Company equipment.

Semiconductors that cannot be searched for on this CD-ROM are listed in the

maintenance manual for the corresponding unit. The maintenance manual contains

a complete list of all semiconductors and their ID Nos., and thus should be used

together with the CD-ROM.

Part number: 9-968-546-XX

Contents

This manual is organized by following sections.

Section 1 Installation

This section describes the operating environment, power supply, installation space,

installation of optional boards and units, rack mounting, connectors, input and

output signals of connectors, checking upon completion of installation, and system

configuration.

Section 2 Service Overview

This section describes the troubleshooting and periodic inspection and maintenance.

Manual Structure

1-1

DCU-8000 IM

Section 1

Installation

1-2-2. Recommended Power Cord

.The power cord is not supplied with the DCU-8000.

Be sure to use the power cord that is applicable to places

in the area.

To avoid a fire or an electric shock, be sure to use the

designated power cord.

.Do not damage the power cord a otherwise fire or

electric shock may result.

For customers in the U.S.A. and Canada

1Power cord, 125 V 10 A (2.4 m) : !1-557-377-11

AC inlet

For customers in the all Europian countories

1Power cord, 250 V 10 A (2.4 m) : !1-782-929-21

AC inlet

1-1. Operating Environment

Operating guaranteed temperature : +5 dC to +40 dC

Performance guaranteed temperature : +10 dC to +35 dC

Operating humidity : 10 % to 90 %

Storage temperature : _20 dC to +60 dC

Mass : Approx. 18 kg

(with all options

installed)

Prohibited locations for installation

.Areas where the unit will be exposed do direct sunlight

or any other strong lights.

.Dusty areas

.Areas is subject to vibration.

.Areas with strong electric or magnetic fields.

.Areas near heat sources.

.Areas subject to electrical noise.

.Areas subject to static electricity.

Ventilation

The inside of the DCU-8000 is cooled by a fan (both sides

on the rear).

The power supply can be damaged if the exhaust vent

(both sides on the rear) and air intake (front panel) are

blocked or the fan is stopped.

Therefore, leave a blank space of more than 10 cm in the

front and back of the DCU-8000.

1-2. Power Supply

1-2-1. Power Specifications

A switching regulator is used for the power supply of this

unit. A voltage within the range of 100 V to 240 V can be

used without changing the supply voltage.

Power requirements : AC 100 to 240 V ±10 %

Power frequency : 50/60 Hz

Current consumption : Maximum 1.4 A

As the inrush current at turn-on is a maximum 20 A (at 100

V)/60 A (at 230 V), the capacity of the AC power must be

commensurate with this source load.

If the capacity of the AC power is not adequately large, the

AC power source breaker will operate or the unit will

abnormally operate.

1-2 DCU-8000 IM

7520

440

482

375

17.5

380

ø26

132.4

Rack mount metal

(supplied with RMM-10)

Unit : mm

1-3. Installation Space (External dimensions)

Autres manuels pour DCU-8000

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sony Changer

Sony

Sony DFS-900M Manuel utilisateur

Sony

Sony MHC-5500 Manuel utilisateur

Sony

Sony MFS-2000-C Manuel utilisateur

Sony

Sony MVS-8000 Manuel utilisateur

Sony

Sony MVS-6500 System Guide de l'utilisateur

Sony

Sony MVS-3000A Guide de l'utilisateur

Sony

Sony HKS-5810M Manuel utilisateur

Sony

Sony G363-ZR0-LAX1 Manuel utilisateur

Sony

Sony BKPF-R70 Manuel utilisateur

Sony

Sony MVS-8000 Manuel utilisateur

Sony

Sony XVS-G1 Manuel utilisateur

Sony

Sony HDS-X3700 Manuel utilisateur

Sony

Sony DVS-9000 Manuel utilisateur

Sony

Sony XA-C30 - 2 Output Selector Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

Sony

Sony XVS-8000-C Manuel utilisateur

Sony

Sony DVS-9000 Manuel utilisateur

Sony

Sony BVS-V3232 Manuel utilisateur

Sony

Sony XVS-9000-C Manuel utilisateur

Sony

Sony MVS-8000X SystemMVS-7000X System Manuel utilisateur

Sony

Sony DVS-7200A Manuel utilisateur

Sony

Sony MVS-8000 Manuel utilisateur

Sony

Sony DMX-SW1 - Bravia Input Link Manuel utilisateur

Sony

Sony HDS-7100 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur