Sony VAIO PCWA-DE30 Manuel utilisateur

4-676-912-21

Wireless LAN

Converter

PCWA-DE30

Quick Start Guide

Kurzeinführung

Manuel de mise en route

www.vaio-link.com

CONTENTS

English -

Quick Start Guide . . . . . . . . . . . . . . . . .page 3

Deutsch -

Kurzeinführung . . . . . . . . . . . . . . . . . .Seite 21

Français -

Manuel de mise en route. . . . . . . . . . .page 41

Wireless LAN Converter

Quick Start Guide

Trademarks

●Sony, VAIO, the logo, the and the Eco Info logo

are trademarks of Sony Corporation.

●Microsoft and Windows are registered trademarks of Microsoft

Corporation in the United States and/or other countries.

●In this manual, Microsoft®Windows®XP Home Edition and Microsoft®

Windows®XP Professional are referred to as Windows XP.

●All other names of systems, products and services are trademarks of their

respective owners. In this manual the TM or ®marks are not specified.

™

Introduction

This document provides an overview of the Wireless LAN Converter

PCWA-DE30 features and the necessary configuration steps.

Unpacking your Access Point

Once you have unpacked the unit, make sure that all of the following items

are present:

●Wireless Unit (1)

●Power cord (2)

●Power Unit (3)

●Adapter plug*

●CD-ROM (setup disc) (4)

●Quick Start Guide (4)

●Troubleshooting Guide (4)

●Warranty leaflet (4)

●Regulatory Leaflet (4)

*Depending on your country.

Names of parts and functions

Wireless Unit

STATUS indicator (1) Indicates the status of the Wireless Converter.

White flashing

(9 sec. lit, 1 sec. out)

Wireless network connection status: good (strong signal).

White flashing

(5 sec. lit, 1 sec. out)

Wireless network connection status: Fair (medium signal).

White flashing

(2 sec. lit, 1 sec. out)

Wireless network connection status: Poor (weak signal).

White flashing

(1 sec. lit, 9 sec. out)

Nothing connected to the NETWORK connector or connected

devices off.

White flashing

(half second intervals)

Startup in progress.

Wait until startup is complete.

White flashing

(0.2 sec. intervals)

Wireless LAN Converter quick setup successful with the Quick

Setup switch.

Pink lit Communicating in Peer to Peer Network connection mode.

Red flashing (6 sec.

intervals)

Wireless LAN Converter quick setup failed with the Quick Setup

switch because it could not acquire setup information from the

Access Point of the PCWA-A320.

Red flashing (3 sec.

intervals)

Search for wireless network in progress.

Communication is not yet possible because connection is not

established. If this condition continues for a long time, check the

settings of the Wireless LAN Converter and the connection target

(2.4 GHz Wireless LAN Access Point, etc.)

Red flashing (1.6 sec.

intervals)

Wireless LAN Converter in Quick Setup standby mode.

Red flashing (1 sec.

intervals)

Wireless LAN Converter firmware update failed. You must update

the firmware again.

Power Unit

Reset to factory default values

To reset to the Wireless LAN Converter factory default settings, proceed as

follows:

1Turn on the Wireless LAN Converter.

2Press the reset switch on the bottom of the Wireless Unit with the end of

a paper clip or a similar object for at least one second.

3When the status indicator begins flashing red, release the reset switch.

The Wireless LAN Converter restarts automatically, and all settings revert

to their factory default values.

●For details about the factory default settings of the Wireless LAN Converter, refer to the

Troubleshooting Guide.

Red flashing (half sec.

intervals)

Unit is resetting: When you release the reset switch, the Wireless

LAN Converter restarts automatically and reverts to its factory

default settings.

Firmware update in progress: Firmware is being updated. Never

turn off the power in this condition.

Reset switch (2) Returns the Wireless LAN Converter settings to their factory

defaults.

LINK/ACT indicator (3) Lights when an Ethernet cable is connected to the NETWORK

connector on the Power Unit.

Wireless unit cable (4) Connects to the WIRELESS UNIT connector on the Power Unit.

Rear cover (5) Remove this cover if you want to hang the Wireless Unit to a wall

and to verify the MAC address.

Wall mounting holes (6) Use these holes to hang the Wireless Unit to the wall.

MAC address label (7) The Wireless LAN Converter MAC address is printed here.

Quick Setup switch (8) Use this switch to set up the Wireless LAN Converter.

100-240 V AC jack (9) Connect the supplied power cord here.

WIRELESS UNIT connector (10) Connect the Wireless Unit cable here.

NETWORK connector (11) Connect the Wireless Unit to your computer or other device

using an Ethernet cable.

Use a straight-through or crossover Ethernet cable.

Capabilities

Wireless access to the Internet for devices with Ethernet

connector

The 2.4 GHz Wireless LAN Converter PCWA-DE30 (hereafter referred to as the

Wireless LAN Converter) is designed to allow devices such as desktop

computer or printers equipped with Ethernet connectors to become part of a

wireless network.

●Only use an Ethernet cable to connect the Wireless LAN Converter to the Ethernet device.

The Wireless LAN Converter does not function as an Access Point.

When setting up the Wireless LAN Converter without the Quick Setup switch, a computer

running Windows Me, Windows 2000, or Windows XP is required.

Only one device can be connected to the Wireless LAN Converter. You cannot use a hub

to connect to several devices.

●The Wireless LAN Converter also allows computers equipped with Wireless LAN

Converters to communicate directly when using the Peer to Peer Network connection

mode, without using a Wireless LAN Access Point.

The Access Point Network connection mode settings are described in this document.

Refer to Help for information about the Peer to Peer Network connection mode settings.

Configuring the Wireless LAN Converter

You can configure the Wireless LAN Converter by performing one of the

following.

With the Quick Setup switch

When the Wireless LAN Converter is connected to the Access Point PCWA-

A320, you can use the Quick Setup switch to configure the Wireless LAN

Converter.

You can use the settings of the Sony Access Point PCWA-A320 to automatically

configure the hardwired (Ethernet) Wireless LAN Converter by using the

Quick Setup switch. The Access Point send the following information to the

Wireless LAN Converter.

●Network Name (SSID)

●Encryption key (WEP key)

With the utility software

When the Wireless LAN Converter is connected to an access point other than

the PCWA-A320, you cannot use the Quick Setup switch to configure the

Wireless LAN Converter. For details, see Configuration with the Utility

Software below.

●You can use the utility software to configure the Wireless LAN Converter even if it is

connected to the PCWA-A320.

Configuration with the Quick Setup Switch

When the Wireless LAN Converter is connected to the PCWA-A320, you can

use the Quick Setup switch to configure it. When the Wireless LAN Converter

is connected to another type of access point, see Configuration with the

Utility Software below.

Procedure 1 - Completing the Access Point setup

Refer to the documentation of your Access Point for details about how to

complete the setup. If your Access Point data encryption (WEP) is not

configured, we strongly suggest that you configure it before proceeding.

Procedure 2 - Performing a Quick Setup

1Wait until the PCWA-A320, and the Wireless LAN Converter starts.

2Press the Quick Setup switch of the PCWA-A320 Wireless Unit for at least

one second.

When the status indicator on the PCWA-A320 starts flashing red, it is ready

for Quick Setup.

The Wireless LAN Converter only remains in Quick Setup standby mode for

30 seconds.

Press the Quick Setup switch one more time for at least one second to

cancel the procedure.

3Press the Wireless LAN Converter Quick Setup switch for at least one

second.

When the Status indicator on the PCWA-A320 stops flashing red and the

Wireless LAN Converter begins flashing white, quick setup is complete.

4Turn off the Wireless LAN Converter.

Procedure 3 - Connecting the Wireless LAN Converter to the

device that you want to use for wireless communication

1Connect the Wireless Unit and Power Unit.

2Connect the Power Unit to the computer or other device capable of

wireless communication using an Ethernet cable.

Autres manuels pour VAIO PCWA-DE30

Table des matières

Langues :

Autres manuels Sony Matériel réseau

Sony

Sony VAIO PCWA-DE30 Manuel utilisateur

Sony

Sony VAIO PCWA-DE30 Feuille d'instructions

Sony

Sony BKST-103 Manuel utilisateur

Sony

Sony 158SVR2000 Manuel utilisateur

Sony

Sony CNU-500 Manuel

Sony

Sony XEC-505 Manuel utilisateur

Sony

Sony PWS-110RX1A Manuel utilisateur

Sony

Sony SNT-EX101E Manuel utilisateur

Sony

Sony Vaio PCWA-C300S Manuel utilisateur

Sony

Sony Ipela SNT-V704 Manuel utilisateur

Sony

Sony NAC-SV10i Manuel utilisateur

Sony

Sony Ipela SNT-EX101 Manuel utilisateur

Sony

Sony Ipela SNT-EX101 Manuel utilisateur

Sony

Sony HAW-EIBU Manuel utilisateur

Sony

Sony CNU-500 Manuel utilisateur

Sony

Sony NAC-SV10i Manuel utilisateur

Sony

Sony PWS-110RX1A Manuel utilisateur

Sony

Sony VAIO PCWA-DE30 Manuel utilisateur

Sony

Sony IXS-6700-C Manuel utilisateur

Sony

Sony PWS-100RX1 Guide de référence

Sony

Sony ODS-D55U Manuel utilisateur

Sony

Sony NSR-500 Manuel utilisateur

Sony

Sony Ipela SNT-V704 Manuel utilisateur

Sony

Sony BKMA-550 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur