Sony DR-BT10CX Manuel utilisateur

Wireless Stereo

Headset

2-698-598-51(1)

DR-BT10CX

Operating Instructions

Mode d’emploi FR

WARNING

To reduce the risk of fire or electric

shock, do not expose this

apparatus to rain or moisture.

To reduce the risk of electrical

shock, do not open the cabinet.

Refer servicing to qualified

personnel only.

Do not install the appliance in a

confined space, such as a bookcase or

built-in cabinet.

To reduce the risk of fire, do not cover the

ventilation of the apparatus with

newspapers, tablecloths, curtains, etc.

And do not place lighted candles on the

apparatus.

To reduce the risk of fire or electric

shock, do not place objects filled with

liquids, such as vases, on the apparatus.

Connect the AC power adaptor to an

easily accessible AC outlet. Should you

notice an abnormality in the AC power

adaptor, disconnect it from the AC outlet

immediately.

Information

This device complies with Part 15 of FCC

Rules and RSS-Gen of IC Rules.

Operation is subject to the following two

conditions: (1) this device may not cause

interference, and (2) this device must

accept any interference, including

interference that may cause undesired

operation of this device.

You are cautioned that any changes or

modifications not expressly approved in

this manual could void your authority to

operate this equipment.

This equipment must not be co-located or

operated in conjunction with any other

antenna or transmitter.

This equipment complies with FCC/IC

radiation exposure limits set forth for

uncontrolled equipment and meets the

FCC radio frequency (RF) Exposure

Guidelines in Supplement C to OET65

and RSS-102 of the IC radio frequency

(RF) Exposure rules. This equipment has

very low levels of RF energy that it is

deemed to comply without testing of

specific absorption ratio (SAR).

The Bluetooth word mark and logos are

owned by the Bluetooth SIG, Inc. and any

use of such marks by Sony Corporation is

under license.

Other trademarks and trade names are

those of their respective owners.

MPEG Layer-3 audio coding technology

and patents licensed from Fraunhofer IIS

and Thomson.

Table Of Contents

Welcome! .......................... 4

3 steps to BLUETOOTH

function ................................. 5

Location and Function of

Parts............................... 6

Charging the unit ............. 7

Pairing ............................... 9

What is pairing? ........................ 9

Procedures of pairing ................ 9

Wearing the headset ...... 11

Indications of

BLUETOOTH function

.. 12

Listening to music ......... 13

Calling ............................. 15

Controlling the BLUETOOTH

mobile phone – HFP, HSP .. 17

Calling while playing

back music .................. 18

Disposing of the unit ..... 19

Precautions .................... 20

What is BLUETOOTH

technology? ................ 22

Troubleshooting ............. 23

Initializing the unit ......... 24

Specifications ................. 25

For the customers in the USA

and Canada

RECYCLING LITHIUM-ION

BATTERIES

Lithium-Ion

batteries are

recyclable.

You can help

preserve our

environment by

returning your used

rechargeable

batteries to the

collection and

recycling location

nearest you.

For more information regarding

recycling of rechargeable

batteries, call toll free 1-800-822-

8837, or visit

http://www.rbrc.org/

Caution: Do not handle damaged

or leaking Lithium-Ion batteries.

Welcome!

Thank you for purchasing this Sony Wireless Stereo Headset. This unit uses

BLUETOOTHTM wireless technology.

•You can enjoy music from your BLUETOOTH device capable of

transmitting music.

• You can enjoy hands-free talking with your BLUETOOTH mobile phone

inside your bag.

•You can charge the unit using the supplied battery charging stand.

For details on BLUETOOTH technology, see page 22.

Enjoy listening to music

Talking on the phone

Calling

Listening to music

3 steps to BLUETOOTH function

BLUETOOTH

mobile phone,

etc. Pairing

Wireless Stereo

Headset

BLUETOOTH connection

Operate the BLUETOOTH

device to make BLUETOOTH

connection.

Connection

Listening to music

You can listen to music played on

the BLUETOOTH device.

Music

BLUETOOTH connection

When the unit is turned on, the unit

starts making the BLUETOOTH

connection to the recognized

mobile phone automatically.

Talking on the phone

You can make and receive a call

by operating unit.

Pairing (each device)

First, register (“pair”) a BLUETOOTH device (mobile phone, etc.) and

this unit with each other. Once pairing is established, there is no need for

pairing again.

Voice

Connection

A2DP HFP HSP

cPage 9

cPage 13 cPage 15

cPage 16 - 17cPage 13 - 14

Location and Function of Parts

1Multi function button

Controls various call

functions.

2Indicator (red)

Indicates the power status of

the unit.

3Indicator (blue)

Indicates the communication

status of the unit.

4POWER button

5Earpieces

6VOL – button

7VOL + button

8Microphone

9RESET button

0Holding clip

Adjust the holding clip to the

desired angle and clip to your

pocket or collar.

qa Contact point

GETTING STARTED

1Connect the supplied

AC power adaptor with

the battery charging

stand.

2Connect the supplied

AC power adaptor to an

AC outlet.

Charging the unit

The unit contains a rechargeable Lithium-Ion battery, which should be

charged before using for the first time.

3Put the unit on the

battery charging stand.

Note

If the holding clip is turned, the

unit cannot be set on the battery

charging stand and charging does

not start. Turn the holding clip

back to the original position before

charging.

Rest the unit on the battery

charging stand so that the unit’s

contact point meets the contact pin

on the battery charging stand, and

make sure that the indicator (red)

lights up.

Charging is completed in about 3

hours* and the indicator (red) goes

off automatically.

*Time required for empty battery to

recharge.

Tip

When charging the battery, the unit is

turned off automatically.

Continued

Battery charging

stand (supplied)

(Rear)

AC power

adaptor

(supplied)

To an AC

outlet

Battery charging

stand (supplied)

Wireless Stereo

Headset

Contact pin

Approx.

usage hours

11 hours

100 hours

Caution

If this unit detects a problem while

charging, the indicator (red) may

turn off, although charging is not

complete.

Check for the following causes:

–Ambient temperature exceeds the range

of 0 °C – 40 °C (32 °F – 104 °F).

–There is a problem with the battery.

In this case, charge again within the

above-mentioned temperature range.

If the problem persists, consult your

nearest Sony dealer.

Notes

•If the battery is not used for a long time,

battery may be quickly depleted,

however, after a few recharges, battery

life will improve.

•If the life of the built-in rechargeable

battery drops to half the normal length,

the battery should be replaced. Consult

your nearest Sony dealer for

replacement of the rechargeable battery.

•Avoid exposure to temperature

extremes, direct sunlight, moisture,

sand, dust or mechanical shock. Never

leave in a car parked in the sun.

•Use only the supplied AC power

adaptor. Do not use any other AC

power adaptor.

Status

Full

Mid

Low

(needs to

charge)

Usage hours*

Status

Communication

time (including

music playback

time) (up to)

Standby time

(up to)

*Time stated above may vary, depending

on ambient temperature or conditions of

use.

Checking the remaining

battery

When pressing the POWER button

while the unit is turned on, the

indicator (red) flashes. You can

check the remaining battery by the

number of times the indicator (red)

flashes.

Indicator (red)

3 times

2 times

1 time

Note

You cannot check the remaining battery

immediately after the unit is turned on, or

while pairing.

When the battery is almost empty

The indicator (red) flashes slowly

automatically.

When the battery becomes empty, a beep

sounds and the unit will turn off

automatically.

Pairing

Continued

What is pairing?

BLUETOOTH devices need to be

“paired” with each other

beforehand.

Once BLUETOOTH devices are

paired, there is no need for pairing

again, except in the following cases:

•When pairing information is

deleted after repair, etc.

• When this unit is paired with 9 or

more devices.

This unit can be paired with 8

BLUETOOTH devices; if a new

device is paired after 8 devices

have been paired, the device

whose latest connection time is

the oldest among the 8 paired

devices is replaced by the new

one.

•When recognition of the unit by

the device to be connected is

deleted.

•When this unit is initialized.

All pairing information is deleted.

Procedures of pairing

1Place the connecting

device within 1 m (3 ft)

of this unit.

2Press and hold the

POWER button for 7

seconds or more to

standby for pairing

while the unit is turned

off.

Notes

•After about 3 seconds, power is

turned on and the indicator

(blue) and indicator (red) flash

together twice. Keep the button

pressed without releasing until

both indicators start flashing

together, then release the button.

This unit enters into pairing

mode.

•

If pairing is not established

within about 5 minutes, pairing

mode will be canceled and this

unit will turn off. In this case,

start over from step 1.

3Perform pairing

procedure on the

connecting device to

detect this unit.

The list of detected devices

appears on the display of the

connecting device. This unit is

displayed as “DR-BT10CX.”

Note

If “DR-BT10CX” is not displayed,

repeat from step 1.

4Select “DR-BT10CX” on

the display of the

connecting device.

5If Passcode*input is

required on the display

of a connecting device,

input “0000.”

Pairing is complete when the

indicator (blue) flashes slowly.

The message standing for

“Pairing complete” appears on

the display of some

BLUETOOTH devices.

*Passcode may be called

“Passkey,” “PIN code,” “PIN

number,” or “Password.”

Note

Passcode of this unit is fixed at

“0000.” This unit cannot be paired

with a BLUETOOTH device

whose Passcode is not “0000.”

6Start the BLUETOOTH

connection from the

BLUETOOTH device.

This unit memorizes the

device as the latest connected

device. Some BLUETOOTH

devices may connect with the

unit automatically when

pairing is complete.

When pairing with a

BLUETOOTH device that

cannot display a list of

detected devices or that

has no display

You may pair the device by setting

both this unit and the connecting

device to pairing mode. For details,

refer to the operating instructions

supplied with the connecting device.

Tips

•To pair with other BLUETOOTH

devices, repeat steps 1to 5for each

device.

•To delete all pairing information, see

“Initializing the unit” (page 24).

Autres manuels pour DR-BT10CX

Table des matières

Langues :

Autres manuels Sony casque

Sony

Sony XBA-1iP Manuel utilisateur

Sony

Sony MDR-ZX330BT Manuel utilisateur

Sony

Sony DR-V150iP Manuel utilisateur

Sony

Sony WH-1000XM2 Manuel utilisateur

Sony

Sony WF-1000XM4 Manuel utilisateur

Sony

Sony DR-BT20NX Manuel utilisateur

Sony

Sony LinkBuds S Manuel utilisateur

Sony

Sony h.ear in 2 WI-H700 Manuel utilisateur

Sony

Sony h.ear in 3 Truly Wireless WF-H800 Guide de référence

Sony

Sony WF-1000XM3 Guide de référence

Sony

Sony XBA-20iP Manuel utilisateur

Sony

Sony WH-1000XM4 Manuel utilisateur

Sony

Sony WH-CH700N Manuel utilisateur

Sony

Sony DRBT140Q - Bluetooth Wireless Stereo Headset Manuel utilisateur

Sony

Sony DR-GA500 - Digital Surround Headset System Manuel utilisateur

Sony

Sony MDR-XB50BS Manuel utilisateur

Sony

Sony DR-EX230DP Manuel utilisateur

Sony

Sony INZONE H3 Guide de référence

Sony

Sony DRBT140Q - Bluetooth Wireless Stereo Headset Manuel utilisateur

Sony

Sony DR-BT1 Manuel utilisateur

Sony

Sony WH-CH500 Manuel utilisateur

Sony

Sony MDR-ZX220BT Manuel utilisateur

Sony

Sony XBA-4iP Manuel utilisateur

Sony

Sony SBH60 Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Jabra

Jabra FR 20 Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

Jabra

Jabra PRO 9460 Duo Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

Jabra

Jabra Steel Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur