Sony SNC-RZ25N - Network Camera Guide de démarrage rapide
HomeLogic LLC 100 Hoods Lane Marblehead, MA 09145 Phone (781) 639-5155 Fax (781) 639-9677
OneHome
Camera Integration Note
Manufacturer: Sony
Model Number(s): SNC-RZ25N
OneHome Versions: 4.0 (build 302 and later)
Comments: IP Setup Version 1.3.5
Document Revision Date: 8/25/2008
O
VERVIEW AND
S
UPPORTED
F
EATURES
Installing the Sony cameras can be broken down into the following steps:
1. Install cameras at desired locations, and pull power and Cat5 cabling as needed. Refer to the
Sony documentation for mounting details.
2. Connect the cameras electrically to the home network and configure the cameras. See Camera
Configuration.
3. Integrate the cameras into the OneHome system and test proper operation. This step is outlined
in HomeLogic Configuration Details.
THE SONY CAMERAS SUPPORT THE FOLLOWING FEATURES:
Pan / Tilt: These cameras can be turned to see various locations.
Zoom: The cameras also support the zoom function.
Presets: These cameras support presets, allowing the user to store predefined locations such as a
driveway or pool.
Audio In: The camera includes a microphone jack. Sound that is picked up by the camera is played at
the Viewer interface.
Video Out: The camera includes an analog video output, which can be connected to an analog DVR to
provide separate recording, or to a TV modulator to enable camera viewing on a television.
Image Flip: The camera can be mounted with its base up or down, and the image will appear normal.
THE SONY CAMERAS DO NOT SUPPORT THE FOLLOWING FEATURES:
Audio Out: The camera includes an audio line-out, but sending audio to the camera is not supported from
the Viewer interface at this time.
Tour Program: The “tour program” feature that can be accessed from the camera’s web interface is not
available from the Viewer interface, though similar behavior can be achieved using the Event Mapper.
Input/Output: The camera includes an I/O connector for sensor inputs and alarm outputs. These are not
supported by the OneHome system at this time.
Motion Detection: Support for motion detection from this camera is not integrated into HomeLogic at this
time.
2 of 4
C
AMERA
C
ONFIGURATION
The camera configuration is done with software provided by Sony, which must be run from a computer
with Windows also connected to the same network as the camera.
The software program from Sony is the IP Setup Program, and the version used for this document is
shown above.
CAMERA SETTINGS
1. Start the IP Setup Program.
2. Wait a moment to allow the software to find the camera: the following screen appears, then select
the desired camera.
3. Set the IP address to the desired value, as shown above: we suggest setting the first camera to
192.168.0.80, the second to 192.168.0.81, and so forth.
4. Set the DNS server address, also as shown above.
5. Set the HTTP port to 80 as shown above.
6. Set the Administrator name and Administrator password. By default Sony uses admin for the
user name and admin for the password. We suggest you use those.
7. Click OK and wait for a few moments: once the settings have saved you should see a small dialog
that confirms the changes were made.
3 of 4
8. Start a browser and bring up the camera, as shown below:
9. Click Settings at the bottom, then select Camera to bring up the screen below:
10. Verify that JPEG is selected at the top of the page, as shown above.
11. Click OK to save your settings.
4 of 4
H
OME
L
OGIC
C
ONFIGURATION
D
ETAILS
The following table provides settings used in the HomeLogic Configurator. Please refer to the Configurator Reference Guide for more details.
In the table below:
o“<User Defined>”, etc. Type in the desired name for the item.
Devices Variable Name Setting Comments
Communication Device N/A (See Note 1) N/A (See Note 1)
Video Cameras Name <User Defined> (Default:
Sony SNC-RZ25N
)
Device Type Sony SNC-RZ25N
Location <User Defined> (Not Required)
IP Address
<User Defined> (Default:
192.168.0.80
) (See Note 2)
Port 80
Login Name <User Defined> (Default:
admin
)
Password <User Defined> (Default:
admin
)
Notes:
1. No
Communication Device
is needed: just add
Video Cameras
.
2. By default, set the first camera to 192.168.0.80, the second to 192.168.0.81, and so on.
Autres manuels pour SNC-RZ25N - Network Camera
4
Autres manuels Sony Appareil photo numérique
Sony
Sony DSLR-A700P - alpha; Digital Single Lens Reflex... Manuel utilisateur
Sony
Sony DSC-H90 Manuel utilisateur
Sony
Sony ILCE7SM2/B Manuel utilisateur
Sony
Sony CYBER-SHOT DSC-W55 Manuel utilisateur
Sony
Sony Cyber-shot DSC-W370 Manuel utilisateur
Sony
Sony Playstation Eye Manuel utilisateur
Sony
Sony A6300 Manuel utilisateur
Sony
Sony Cyber-shot DSC-F828 Manuel utilisateur
Sony
Sony Cyber-shot DSC-T1 Manuel utilisateur
Sony
Sony DSC-M1 Manuel utilisateur
Sony
Sony DSC-H7 Cyber-shot® Manuel utilisateur
Sony
Sony ZV-E1 Manuel utilisateur
Sony
Sony SSC-C104 Manuel utilisateur
Sony
Sony DSLR-A200 - alpha; Digital Single Lens Reflex... Manuel d'utilisation et d'entretien
Sony
Sony DSLR-A700 Manuel utilisateur
Sony
Sony HDC-P50 Manuel utilisateur
Sony
Sony Cyber-shot DSC-W730 Manuel d'instructions d'installation
Sony
Sony Cyber-shot DSC-S600 Mode d’emploi
Sony
Sony Cyber-shot DSC-T1 Manuel d'utilisation et d'entretien
Sony
Sony Cyber-shot DSC-H70 Manuel d'instructions d'installation
