Sony BRC-X400 Guide de démarrage rapide

Version 1.0

Technical Guide | BRC-X400/SRG-X400/X120

SRT introduction

Sony Version 1.0

Technical Guide | BRC-X400/SRG-X400/X120 SRT introduction

CONTENTS

CONTENTS ............................................................................................... 1

1. Overview............................................................................................. 2

2. Flowchart............................................................................................ 3

3. Pre-configuration Settings................................................................ 4

3.1. HTTP/RTSP setting ................................................................................4

3.2. Set IP address by using the RM-IP Setup Tool........................................4

3.3. Change the default password .................................................................4

3.4. Camera’s Codec Setting.........................................................................5

3.5. SRT setting.............................................................................................6

4. Troubleshooting............................................................................... 12

Revision History..................................................................................... 13

Sony Version 1.0

Technical Guide | BRC-X400/SRG-X400/X120 SRT introduction

1. Overview

This document explains typical Procedures and Tips for the SRT connectivity when using Sony’s

Color Video Camera BRC-X400/SRG-X400/SRG-X120/BRC-X401/SRG-201M2/SRG-HD1M2

(hereinafter, called “the cameras”).

Services and software provided by other companies

・Separate terms and conditions of use may be applied.

・Provision of services and software updates may be interrupted or terminated without notice.

・Services and software content are subject to change without notice.

・Separate registration and/or payment may be required.

Please note that Sony Corporation is not responsible for any claim, from customers or third

parties, arising from any use of services and software provided by other companies

Sony Version 1.0

Technical Guide | BRC-X400/SRG-X400/X120 SRT introduction

2. Flowchart

The flowchart shows outline of the procedure for enabling the SRT connectivity function of

the camera described in the following chapter.

*Please refer to the manual of the devices to be connected.

Sony Version 1.0

Technical Guide | BRC-X400/SRG-X400/X120 SRT introduction

3. Pre-configuration Settings

This section describes some pre-configuration settings you will need before activating the SRT

function for the cameras.

3.1. HTTP/RTSP setting

The HTTP/RTSP communication setting need to be enabled in order to communicate via network

before the SRT function of the camera is enabled. Please refer to the Operation Manual of the target

camera, and set the HTTP/RTSP communication setting.

Ref).

-The section of [Adjusting and Configuring the Camera through On-Screen Menus] – [SYSTEM

Menu] - [HTTP/RTSP] of the Camera’s Operation Manual.

-The section of [Accessing the Camera from a Web Browser] – [Enabling HTTP/RTSP in the

Camera] of the Camera’s Operation Manual.

3.2. Set IP address by using the RM-IP Setup Tool

For IP communication, the IP address needs to be set. You can use RM-IP Setup Tool to assign IP

address to the camera. Please refer to the RM-IP Setup Tool Guide for more details.

[Note] The DHCP setting cannot be enabled from the RM-IP Setup Tool.

3.3. Change the default password

When the procedure of 3.1 and 3.2 are performed, HTTP access to the camera is available. Please

change the default password (initial password) according to the Operation Manual of the Camera.

Ref).

The section of [Accessing the Camera from a Web Browser]-[Changing the Initial Password] of the

Camera’s Operation Manual.

Sony Version 1.0

Technical Guide | BRC-X400/SRG-X400/X120 SRT introduction

3.4. Camera’s Codec Setting

For SRT function, available channel is Image 1, fixed with H.264.

3.4.1. Audio setting

Please enable Audio to use SRT function. SRT function cannot be used when Audio is not enabled.

Open the [Audio] tab of the Administrator Settings menu, and check [Enable] checkbox of [Send].

Sony Version 1.0

Technical Guide | BRC-X400/SRG-X400/X120 SRT introduction

3.5. SRT Setting

Before starting SRT transmission, Port to be used and whether Camera is set to Caller mode or

Listener mode needs to be fixed.

Caller means it starts the transmission, while Listener means it waits for it.

Caller/Listener can be set regardless of whether it sends/receives the images. Once one side is set as

Caller, the other needs to be Listener.

In general, the device in firewall is set as Caller, and the device with global IP address such as server

is set as Listener.

Both Caller and Listener are supported for the cameras. If camera is set as Caller, set the connection

destination as Listener. If camera is set as Listener, set the connection destination as Caller.

Some devices support either Caller or Listener only. In that case, set camera to establish the

connection.

Please refer to the manual of the device to be connected as well.

Regarding the SRT connection environment, please refer to the information announced from SRT

Alliance.

https://www.srtalliance.org/srt-deployment-guide/

Sony Version 1.0

Technical Guide | BRC-X400/SRG-X400/X120 SRT introduction

3.5.1. When setting camera as Caller

Open [Streaming] tab of the Administrator Settings menu, and select [SRT-Caller] of [Streaming

mode].

Set IP address or URL, then [:] followed by Port number for [URL(Destination)]. Press [OK] to

complete the setting.

Sony Version 1.0

Technical Guide | BRC-X400/SRG-X400/X120 SRT introduction

3.5.2. When setting camera as Listener

Open [Streaming] tab of the Administrator Settings menu, and select [SRT-Listener] of [Streaming

mode].

Set Port number of the destination for [Port number]. Press [OK] to complete the setting.

Sony Version 1.0

Technical Guide | BRC-X400/SRG-X400/X120 SRT introduction

3.5.3. Setting of Latency and TTL

Set [Latency] and [TTL] upon the transmission environment.

Recommended to set enough latency according to RTT to the destination measured in advance.

For the recommended setting value, please refer to the information announced from SRT Alliance.

https://www.srtalliance.org/srt-deployment-guide/

Autres manuels pour BRC-X400

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sony Appareil photo numérique

Sony

Sony Cyber-shot DSC-HX350 Manuel utilisateur

Sony

Sony CYBER-SHOT DSC-W1 Guide de configuration

Sony

Sony MHS-CM1/D - Webbie Hd™ Mp4 Camera Manuel utilisateur

Sony

Sony Cyber-shot DSC-HX200 Manuel utilisateur

Sony

Sony DSC-WX300 Manuel d'instructions d'installation

Sony

Sony NEX-5K/B Manuel utilisateur

Sony

Sony Cyber-shot DSC-T50 Instructions de montage

Sony

Sony Cyber-shot DSC-TX10 Manuel utilisateur

Sony

Sony DSC-H90 Manuel utilisateur

Sony

Sony Cyber-Shot DSC-HX9 Manuel utilisateur

Sony

Sony Cyber-shot DSC-U50 Manuel utilisateur

Sony

Sony Cyber-shot DSC-TX100 Manuel utilisateur

Sony

Sony Cyber-shot DSC-RX100M4 Manuel utilisateur

Sony

Sony Cyber-shot DSC-TX9 Manuel utilisateur

Sony

Sony A 7 R IV Manuel utilisateur

Sony

Sony DSC-TX7 - Cyber-shot Digital Still Camera Manuel utilisateur

Sony

Sony Cyber-shot DSC-T20 Manuel utilisateur

Sony

Sony CYBER-SHOT W55 Manuel utilisateur

Sony

Sony Alpha 230 Manuel utilisateur

Sony

Sony Cyber-shot DSC-N2 Manuel utilisateur

Sony

Sony DSC-S45 - Cyber-shot Digital Still Camera Manuel utilisateur

Sony

Sony DSC-TX1 Cyber-shot® Manuel utilisateur

Sony

Sony Cyber-shot DSC-HX20V Manuel utilisateur

Sony

Sony CYBER-SHOT DSC-W12 Manuel utilisateur

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Nikon

Nikon COOLPIX A Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE J1470S Manuel utilisateur

Canon

Canon EOS ELAN7 Manuel utilisateur

Nikon

Nikon Coolpix 100 Manuel utilisateur

Samsung

Samsung SCC-C4253 Manuel utilisateur

JVC

JVC GT-HM890 Manuel utilisateur