SONNOC SNP-LU850E Manuel utilisateur

NOTICES

All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.

GENERAL

Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this

document. Sonnoc reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary

depending on conditions beyond Sonnoc control such as maintenance of the product in proper working conditions. Performance specifications are based on

information available at the time of printing. Sonnoc makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties

of fitness for a particular purpose. Sonnoc will not be liable for errors contained herein or for incidental or consequential damages in connection with the

performance or use of this material.

For the most current technical documentation and office contact information, visit www.sonnoc.com/us/

WARRANTY

Products are warranted under Sonnoc’s standard limited warranty, the details of which are available at

www.sonnoc.com/us

or by contacting your Sonnoc dealer or Sonnoc.

PREVENTATIVE MAINTENANCE

Preventative maintenance is an important part of the continued and proper operation of your product. Failure to perform maintenance as required, and in

accordance with the maintenance schedule specified by Sonnoc, will void the warranty.

REGULATORY

The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the product is operated in a commercial environment. The product generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of the product in a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at the user's own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

CAN ICES-003 (A) / NMB-003 (A)

이기기는 업무용 (A 급) 으로 전자파적합등록을 한기기이오니 판매자 또는 사용자는 이점을 주의하시기 바라며 , 가정 외의 지역에서 사용하는 것을 목적으로 합니다 .

ENVIRONMENTAL

The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol

means that

electrical and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and

according to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products. Please help us to

conserve the environment we live in!

Sonnoc User Manual

Content

Introduction...............................................................................................................8

Safety and warning guidelines .............................................................................................. 8

AC/power precautions ................................................................................................... 9

Installation safety and warning guidelines ....................................................................... 9

Laser safety precautions...............................................................................................10

Batteries precautions ...................................................................................................10

3D safety information...................................................................................................10

Product labels .............................................................................................................12

Projector overview..............................................................................................................13

Contact your dealer ............................................................................................................13

Key features ......................................................................................................................14

How the projector works .....................................................................................................15

List of components .............................................................................................................15

Product documentation .......................................................................................................16

Related documentation.................................................................................................16

Built-in keypad...................................................................................................................16

Input/Output (I/O) panel.....................................................................................................17

IR remote keypad...............................................................................................................18

Adjusting the size and position ................................................................................. 20

Adjusting the Projected Image .............................................................................................20

Adjusting the Projector’s Height ....................................................................................20

Stacking Application ...........................................................................................................21

Setting the image size preset ..............................................................................................22

Adjusting pixel phase..........................................................................................................23

Setting the position of display image ....................................................................................23

Setting the digital size of display image ................................................................................23

Setting the digital position of display image ..........................................................................24

Geometry correction ...........................................................................................................24

Saving geometry correction ..........................................................................................24

Applying geometry correction........................................................................................24

Adjusting horizontal keystone .......................................................................................25

Adjusting the vertical keystone .....................................................................................25

Adjusting horizontal pincushion .....................................................................................25

Content

Sonnoc User Manual

Adjusting vertical pincushion.........................................................................................26

Adjusting 4-corner .......................................................................................................26

Enabling auto warp filter ..............................................................................................26

Adjusting warp filter.....................................................................................................26

Resetting geometry correction setting ............................................................................27

Configuring warp and blend .................................................................................................27

Warping an image .......................................................................................................27

Downloading a warp from the projector memory.............................................................28

Enabling basic image blending ......................................................................................28

Blending multiple images..............................................................................................29

Downloading a blend from the projector memory ............................................................29

Performing auto warp and blend....................................................................................30

Adjusting the image settings ..................................................................................... 31

Adjusting the brightness .....................................................................................................31

Adjusting the contrast.........................................................................................................31

Adjusting the color space ....................................................................................................31

Adjusting the image sharpness ............................................................................................32

Setting up 3D display .........................................................................................................32

Setting 3D format........................................................................................................32

Inverting 3D signal ......................................................................................................33

Setting the 3D sync output signal..................................................................................33

Setting the frame delay................................................................................................33

Configuring the video settings..............................................................................................34

Adjusting black and white video ....................................................................................34

Adjusting the color balance...........................................................................................34

Adjusting the skin color ................................................................................................34

Reducing the temporal noise .........................................................................................34

Reducing the MPEG noise .............................................................................................35

Setting the input levels .......................................................................................................35

Adjusting the color gain................................................................................................35

Adjusting the color offset..............................................................................................35

Resetting the input levels .............................................................................................36

Configuring picture settings .................................................................................................36

User configuration ..............................................................................................................37

Setting the contrast ratio ....................................................................................................37

Enabling the image freeze ...................................................................................................38

Setting the high dynamic range ...........................................................................................38

Adjust the color of the image...............................................................................................38

Content

Sonnoc User Manual

Adjusting primary colors...............................................................................................39

Setting the wall color ...................................................................................................40

Adjusting the color value based on gamma setting.................................................................40

Adjusting the white peaking ................................................................................................41

Adjusting the color temperature...........................................................................................41

Adjusting the color wheel speed...........................................................................................41

Save and Restore user data.................................................................................................41

Configuring system settings...................................................................................... 42

Changing the language .......................................................................................................42

Adjusting lens settings ........................................................................................................42

Aligning the image with zoom and focus.........................................................................42

Adjusting lens position .................................................................................................43

Saving lens setting ......................................................................................................43

Applying the previous lens setting .................................................................................43

Locking the lens motor .................................................................................................44

Resetting the lens to home position ...............................................................................44

Selecting screen image orientation .......................................................................................44

Adjusting on-screen display menus.......................................................................................44

Determining the on-screen display position.....................................................................45

Showing messages ......................................................................................................45

Setting the transparency of the on-screen display position ...............................................45

Changing the splash screen ..........................................................................................45

Setting time out for on-screen display ...........................................................................45

Setting up password protection .....................................................................................46

Changing password......................................................................................................46

Setting up power mode.......................................................................................................46

Setting the standby mode.............................................................................................46

Setting the AC power ...................................................................................................47

Setting the time for auto shutdown ...............................................................................47

Setting the sleep timer.................................................................................................47

Enabling high altitude setting...............................................................................................47

Adjusting IR control settings................................................................................................48

Setting 12V trigger .............................................................................................................48

Setting audio settings .........................................................................................................48

Configuring communications .................................................................................... 49

Setting network environment...............................................................................................49

Adjusting LAN setting...................................................................................................49

Content

Sonnoc User Manual

Adjusting WLAN setting ................................................................................................50

Adjusting network setting .............................................................................................50

Setting serial port baud rate .........................................................................................50

Enabling serial port echo ..............................................................................................50

Logging on to the web user interface .............................................................................51

Using the web interface................................................................................................51

Using the RS-232C interface .........................................................................................51

Re-connecting the network ...........................................................................................52

Adjusting the back light settings ..........................................................................................52

Setting the hot key.............................................................................................................52

Configuring date and time ...................................................................................................52

Setting the clock mode.................................................................................................53

Setting the date ..........................................................................................................53

Setting the time ..........................................................................................................53

Setting the daylight saving time ....................................................................................53

Setting the NTP server .................................................................................................53

Setting the time zone...................................................................................................54

Setting the update interval for date and time .................................................................54

Applying the date and time settings...............................................................................54

Set event schedules............................................................................................................54

Setting the date and time schedule ...............................................................................54

Setting the schedule mode ...........................................................................................54

Viewing the event list for the day ..................................................................................55

Setting the weekly schedule..........................................................................................55

Reseting the schedule ..................................................................................................55

Configuring light source............................................................................................. 56

Setting light source ............................................................................................................56

Setting constant power .......................................................................................................57

Projector information.................................................................................................. 58

Viewing projector information ..............................................................................................58

Changing the language .......................................................................................................58

Selecting a test pattern.......................................................................................................59

Configuring input settings ......................................................................................... 60

Setting the main input source..............................................................................................60

Setting the second input source ...........................................................................................60

Enabling the second input source .........................................................................................60

Swapping the main input and second input source .................................................................60

Content

Sonnoc User Manual

Setting the size of second input source.................................................................................61

Setting the display layout with two input sources...................................................................61

Input sources layout and size........................................................................................61

Setting the timing detection mode........................................................................................62

Setting the input searching method ......................................................................................62

Adjusting the sub image .....................................................................................................63

Enabling low latency mode ..................................................................................................63

Configuring the HDMI setting...............................................................................................63

Configuring the HDMI output ...............................................................................................64

Signal connectivity specifications............................................................................. 65

VGA video formats .............................................................................................................65

HDMI video formats............................................................................................................68

HDBaseT video formats .......................................................................................................71

Picture-in-picture/picture-by-picture (PIP/PBP) compatibility ...................................................74

Regulatory ...............................................................................................................75

Safety ...............................................................................................................................75

Laser safety.......................................................................................................................75

Electro-magnetic compatibility .............................................................................................75

Emissions ...................................................................................................................75

Immunity....................................................................................................................76

Environmental....................................................................................................................76

FCC ..................................................................................................................................76

IEC ...................................................................................................................................76

CE ....................................................................................................................................77

Declaration of Conformity for EU countries ............................................................................77

WEEE ................................................................................................................................77

Sonnoc User Manual

Introduction

This manual is intended for Sonnoc qualified installers and trained operators of Sonnoc Series

projection systems.

For complete Sonnoc Series product documentation and technical support, go to

www.sonnoc.com/us/

Safety and warning guidelines

Read all safety and warning guidelines before installing or operating the projector. This projector

must be operated in an environment that meets the operating range specification. Use only the

attachments and/or accessories recommended by Sonnoc. Use of others may result in the risk of

fire, shock, or personal injury.

Warning! If not avoided, the following could result in death or serious injury.

•

Do not operate the product without all of its covers in place.

•

This product must be installed within a restricted access location not accessible by the general

public.

•

Only personnel who are trained on the precautions for the restricted access location can be

granted entry to the area.

•

FIRE HAZARD! Keep hands, clothes, and all combustible material away from the concentrated

light beam of the projector.

•

TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be

tripped over, or damaged by persons walking on or objects rolling over the cables.

•

SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,

removing components, or opening any enclosure.

•

A minimum of four people or appropriately rated lift equipment is required to safely lift, install, or

move the product.

•

OPTICAL RADIATION HAZARD! Disconnect the power plug from the AC outlet if the product is not

being used for an extended period of time.

•

Do not allow anything to rest on the power cord.

•

Do not use under the following conditions:

In extremely hot, cold or humid environments.

(i)

Ensure that the ambient room temperature is within 5°C to 40°C (storage -10°C to 60°C)

(ii)

Relative humidity is 10% to 85% RH (storage 5% to 90%RH).

In areas susceptible to excessive dust and dirt.

Near any appliance generating a strong magnetic field.

In direct sunlight.

Introduction

Sonnoc User Manual

Caution! If not avoided, the following could result in minor or moderate injury.

•

Always provide proper ventilation for the product to prevent overheating.

•

Only Sonnoc qualified technicians are permitted to open product enclosures.

•

All procedures must be performed by Sonnoc qualified technicians.

Notice. If not avoided, the following may result in equipment or property damage.

•

Do not expose the product to moisture.

•

Always use a lens plug when installing or moving the product. This prevents contaminants from

entering the product.

•

Only use cleaning solutions recommended by Sonnoc. All other cleaning solutions may cause

product damage and will void the warranty.

AC/power precautions

Read all AC/power precautions before installing or operating the projector.

Warning! If not avoided, the following could result in death or serious injury.

•

FIRE HAZARD! Do not use a power cord, harness, or cable that appears damaged.

•

FIRE OR SHOCK HAZARD! Do not overload power outlets and extension cords.

•

SHOCK HAZARD! Only use the AC power cord provided with the product or recommended by

Sonnoc.

•

FIRE AND SHOCK HAZARD! Do not attempt operation unless the power cord, power socket, and

power plug meet the appropriate local rating standards.

•

SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage

and current, as specified on the license label.

•

SHOCK HAZARD! The AC power cord must be inserted into an outlet with grounding.

•

SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,

removing components, or opening any enclosure.

•

Install the product near an easily accessible AC receptacle.

Installation safety and warning guidelines

Read all installation safety and warning guidelines before installing the projector.

Warning! If not avoided, the following could result in death or serious injury.

•

High leakage current present when connected to IT power systems.

Caution! If not avoided, the following could result in minor or moderate injury.

•

ELECTRICAL and BURN HAZARD! Use caution when accessing internal components.

•

Only Sonnoc qualified technicians are authorized to use the tools provided in the toolbox.

Introduction

Sonnoc User Manual

Laser safety precautions

This product is classified as Class 1 Laser Product-Risk Group 2 according to IEC 60825-1:2014

complies with FDA regulations 21 CFR 1040.10 and 1040.11 as a Risk Group 2, LIP (Laser

Illuminated Projector) as defined in IEC 62471:2006 except for deviations pursuant to Laser Notice

No. 50, dated June 24, 2007.

Warning! If not avoided, the following could result in death or serious injury.

•

This projector has a built-in Class 4 laser module. Never attempt to disassemble or modify the

projector.

•

Any operation or adjustment not specifically instructed in the User manual creates the risk of

hazardous laser radiation exposure.

•

Do not open or disassemble the projector as this may cause damage or exposure to laser

radiation.

•

Do not stare into beam when the projector is on. The bright light may result in permanent eye

damage.

•

When turning on the projector, make sure no one within projection range is looking into the lens.

•

Follow all installation, operation, adjustment, and maintenance procedures to avoid possible

exposure to hazardous laser radiation.

Batteries

precautions

Read the following precautions for your battery:

Caution! If not avoided, the following could result in minor or moderate injury.

•

Keep new and used batteries away from children.

•

Discontinue usage if leakage is found.

•

EXPLOSION HAZARD! Dispose of the battery according to local area regulations.

Warning! If not avoided, the following could result in death or serious injury.

•

CHEMICAL BURN HAZARD! Do not injest the battery.

•

INTERNAL BURNS HAZARD! The product contains a coin cell battery and if swallowed can cause

internal burns within two hours.

•

INTERNAL BURN HAZARD! Seek medical attention if a battery has been swallowed or placed

inside any part of the body.

•

EXPLOSION OR FIRE HAZARD! Replacement battery must be of the correct type and replaced

properly.

•

EXPLOSION HAZARD! Do not mechanically cut or crush the battery or dispose of it in a fire or

oven.

3D safety information

Follow all recommended warnings and precautions before using the 3D function.

Caution! If not avoided, the following could result in minor or moderate injury.

•

Closely supervise children and teenagers viewing 3D images as they may be more susceptible to

health issues associated with them.

Photosensitive seizure warning and other health risks

Some viewers may experience discomfort when exposed to certain flashing images or lights contained

in certain projector pictures or video games.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SONNOC Projecteur

SONNOC

SONNOC SNP-LU8500+ Manuel utilisateur

SONNOC

SONNOC SNP-LU6500 Manuel utilisateur

SONNOC

SONNOC SNP-ELU520 Manuel utilisateur

SONNOC

SONNOC SNP-LU11K Manuel utilisateur

SONNOC

SONNOC SNP-LU7000 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur