BASS +/-
In play status, press the BASS +/- button on the remote control.
In play status, press the T
This function provides a better quality of BASS and TREBLE sound.
REBLE +/- button on the remote control.
TREBLE +/-
PLAYING USB
Press the “CD/USB” button to switch to CD/USB playback.
Connecting a USB device
1) Insert a USB key into the connector.
2) Press the CD / USB key to start.
Remark: Depending on the capacity of the device, the reading can take more than 1 minutes.
T
*USB can support IPOD / IPHONE charging:When the unit is in working mode,press "source"button to
swith to USB status for IPOD charging.
he unit cannot read my USB device.
- Once you have plugged your device to the unit, you may need to switch on the USB device
before it can operate.
- This unit does not support a direct USB connection with a computer. You need to use a USB
device, a MP3 player or a PMP (Portable Multimedia Player with hard disk).
- If you are using a USB external hard disk: you need to connect your device simultaneously to
an external power source.If you are using a self-powered PMP, make sure that the battery is
sufficiently loaded.
- Check that the file system of your USB device is formatted as FAT or FAT 32. USB device
formatted into NTFS are not compatible with this unit. Caution: If you attempt to modify
your file system, formatting your device will erase all data. Please refer to your USB device’s
instruction manual first.
plug your headphone into the Headphone socket (on the front panel). It will
enable you to listen to the audio in private.
Note: 1. Avoid impairing your hearing, please turn the volume to the lowest status before
listening.
2. When plugging the headphone, the speakers have no sound.
Remark: Headphone is not provided.
1. Enter FM Function
In the turn-on or playing status, press the SOURCE button on the remote control (or front panel) to
enter FM status. Press this button again to switch between FM and CD playing.
2. Select Bands
1) Select band by pressing button.
2) Select band by pressing number buttons: you may select the bands that have been saved by
pressing the number buttons. For example: press 10+ button once, 5button once, you may
-7-
“SEEK- ”or “SEEK+ ”
select the 15th band. Press the button, the band will be switched up or down.
3) Automatically search bands: press the SEARCH button, this unit will start to search bands from the
lowest part to highest part automatically. Meanwhile the searched bands will be saved orderly.
3. Audio Mode Selection(mono/stereo)
Press the STEREO button on the remote control, you may select Mono and Stereo output mode
in FM status. If the signal is not strong enough, you cannot select Stereo.
“CH- ”or “CH+ ”
User Instructions
USING HEADPHONE
FM RADIO OPERATION
