SonicWALL TZ 150 Wireless Manuel utilisateur

SonicWALL TZ 150 Wireless

Getting Started Guide

SonicWALL TZ 150 Wireless Getting Started Guide Page 1

SonicWALL TZ 150 Wireless

Getting Started Guide

The SonicWALL®TZ 150 Wireless is a total security platform for both

your wired and wireless network, delivering true layered security by

integrating gateway anti-virus, intrusion prevention and content

filtering capabilities in an easy-to-use, low cost platform.

This Getting Started Guide provides instructions for basic installation

and configuration of the SonicWALL TZ 150 Wireless. After you

complete this guide, up to 10 computers on your wired and wireless

network will have secure Internet access.

Note: For complete documentation, refer to the SonicOS Standard

3.0 Administrator’s Guide available on the SonicWALL Resource CD

included with your security appliance and on the Web at:

<http://www.sonicwall.com/services/documentation.html>.

Before You Begin

Check Package Contents

• One SonicWALL TZ 150 Wireless security appliance

• One SonicWALL TZ 150 Wireless Getting Started Guide

• One SonicOS Standard 3.0 Release Notes

• One SonicWALL Security Services Free Trial card

• One Ethernet cable

• One 12V, 1.66A power supply

• One SonicWALL Resource CD, which contains product

documentation and software utilities.

Any Items Missing?

If any items are missing from your package, contact:

SonicWALL Support

Web: <http://www.sonicwall.com/support/>

E-mail: [email protected]

Page 2

SonicWALL TZ 150 Wireless Configuration

This Getting Started Guide covers the following procedures.

Procedures 1 through 7 are required for initial configuration of your

SonicWALL TZ 150 Wireless security appliance.

Collecting Required Information page 3

Applying Power to the SonicWALL TZ 150 Wireless page 4

Connecting the SonicWALL TZ 150 Wireless page 5

Accessing the Management Interface page 6

Using the SonicWALL Setup Wizard page 8

Testing Your Connection page 17

Registering Your SonicWALL TZ 150 Wireless page 18

Connecting Wireless Clients to the

SonicWALL TZ 150 Wireless page 23

Connecting Computers to Your

SonicWALL TZ 150 Wireless page 27

Mounting the SonicWALL TZ 150 Wireless page 30

What You Need to Begin

• A computer to use as a management station for initial

configuration of the SonicWALL TZ 150 Wireless

• An Internet connection

• A Web browser for accessing the security appliance’s Web-based

management interface. The Web browser must support Java and

HTTP uploads. Internet Explorer 5.0 or higher or Netscape

Navigator 4.7 or higher are recommended.

SonicWALL TZ 150 Wireless Getting Started Guide Page 3

Collecting Required Information

Internet Service Provider (ISP) Information

Collect the following information about your Internet service:

Other Information

If you connect via

You

probably

use

Please record

• Cable modem

• DSL with a router

DHCP You do not need to provide any

Internet connection information.

•HomeDSL

• DSL modem

PPPoE User name:

Password:

Note: Your ISP may require your user

name in the format: name@ISP.com

•T1

• Static broadband

• Cable or DSL

with a static IP

Static IP IP address:

Subnet mask:

Default gateway

(router address):

Primary DNS:

S e c o n d a r y D N S ( o p t i o n a l ) :

• Dial in to a server PPTP Server address:

User name:

Password:

SonicWALL Management Interface Administrator Account

User name: admin

Password: password

These are the default settings, which you can modify.

Page 4

Applying Power to the

SonicWALL TZ 150 Wireless

1. Plug the power supply into the back of the security appliance

and into an appropriate power outlet.

Warning: Only use a SonicWALL-approved 12V, 1.66A power

supply.

The Power LED on the front panel lights up green when you

plug in the SonicWALL TZ 150 Wireless. The Test LED lights

up and may blink while the appliance performs a series of

diagnostic tests. When the Test LED is no longer lit, the security

appliance is ready for configuration.

If the Test LED remains lit after the SonicWALL TZ 150 Wireless

has booted, disconnect the power to the security appliance for a

few seconds and plug it back in to restart the unit.

Note: For more trouble shooting information, refer to the

SonicOS Standard 3.0 Administrator’s Guide.

SonicWALL TZ 150 Wireless Getting Started Guide Page 5

Connecting the

SonicWALL TZ 150 Wireless

Connecting the Ethernet Cables

Connect the WAN Cable

1. Connect one end of an Ethernet cable to your Internet

connection, such as a DSL modem or cable modem.

This cable may already be connected between your computer

and your modem. If so, disconnect it from your computer, and

leave it connected to the Internet.

2. Connect the other end of the cable to the WAN port on the back

of your SonicWALL TZ 150 Wireless.

The WAN LEDs on the front panel light up indicating an active

connection.

WAN

Modem or Router

Internet

Page 6

Connect the LAN Cable

1. Connect one end of another Ethernet cable to the computer you

are going to use to manage the SonicWALL TZ 150 Wireless.

2. Connect the other end of the cable to port # 1on the back of your

SonicWALL TZ 150 Wireless.

The port # 1LEDs on the front panel light up indicating an active

connection.

Accessing the Management Interface

To access the Web-based management interface of the

SonicWALL TZ 150 Wireless appliance, follow these three steps:

1. On the computer you have connected to port # 1, start your Web

browser.

Alert: Disable pop-up blocking software before accessing the

SonicWALL management interface.

Your Web browser must support Java and HTTP uploads.

Current versions of Internet Explorer, Netscape Navigator,

Mozilla, and Firefox are recommended.

Management

Station

port 1

SonicWALL TZ 150 Wireless Getting Started Guide Page 7

2. Enter 192.168.168.168 in the Location or Address field.

3. The SonicWALL Setup Wizard launches and guides you

through the configuration and setup of your security appliance.

If the SonicWALL Setup Wizard Does Not Appear

If you cannot connect to the SonicWALL TZ 150 Wireless

appliance or the Setup Wizard does not display:

• Did you correctly enter the SonicWALL TZ 150 Wireless

management IP address, 192.168.168.168, in your Web

browser?

• Is your computer running pop-up blocking software?

• Are the Local Area Connection settings on your computer set

to obtain an IP address dynamically (DHCP)? If not,

see Procedure 9, “Connecting Computers to Your

SonicWALL TZ 150 Wireless” on page 27 for instructions on

changing your Local Area Connection settings.

• Do you have the Ethernet cable connected to your computer

and to port 1on your SonicWALL TZ 150 Wireless?

• Some browsers may not launch the Setup Wizard

automatically. In this case, log into the security appliance

using “admin” as the user name and “password” as the

password. After you log in, click the Wizards button on the

System > Status page to launch the wizard.

Page 8

Using the SonicWALL Setup Wizard

The SonicWALL Setup Wizard provides user-guided instructions for

configuring your SonicWALL TZ 150 Wireless.

Note: It is important that you have collected any required ISP

information before using the Setup Wizard. See the list in

Procedure 1, “Collecting Required Information” on page 3.

Tip: If you do not know what type of Internet connection you have,

contact your ISP. In addition, the SonicWALL Setup Wizard will

attempt to detect your connection settings.

Welcome - Click Next to begin.

1. Deployment Scenario - Select the wireless deployment scenario

that best matches your deployment requirements. Clicking on the

deployment scenario link displays a diagram of the deployment to

show how the scenario is best used.

SonicWALL TZ 150 Wireless Getting Started Guide Page 9

This Getting Started Guide follows the procedure for setting up an

Office Gateway deployment, which is a commonly used wireless

deployment for LAN and WLAN to Internet connectivity. For

instructions on setting up other deployments, refer to the

SonicOS Standard 3.0 Administrators Guide.

Select Office Gateway and click Next.

2. Change Password - Change the administrative password. This

is the password for the admin account.

Note: Keep your new password in a safe place. If you lose your

password, you will have to reset the security appliance to factory

settings and lose your configuration. For instructions on resetting

your security appliance, refer to the SonicOS Standard 3.0

Administrator’s Guide.

Click Next.

3. Change Time Zone - Set the Time Zone to your local time zone.

Note: It is important that you set the time zone correctly before

you register your SonicWALL TZ 150 Wireless.

Click Next.

Old Password Should be populated with the default password,

password.

New Password Enter your new password.

Confirm Re-enter your new password.

Time Zone Select the time zone for your location from the list.

Automatically

adjust clock

for daylight

saving time

Check this setting if you live in an area that

observes Daylight Saving Time.

Autres manuels pour TZ 150 Wireless

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SonicWALL Pare-feu

SonicWALL

SonicWALL TZ 170 Manuel utilisateur

SonicWALL

SonicWALL 2100 CF Manuel utilisateur

SonicWALL

SonicWALL NSA 250M series Manuel utilisateur

SonicWALL

SonicWALL SMA 400 Mode d’emploi

SonicWALL

SonicWALL NSa 4650 Manuel utilisateur

SonicWALL

SonicWALL TZ 190 Manuel utilisateur

SonicWALL

SonicWALL PRO 2040 Manuel utilisateur

SonicWALL

SonicWALL SOHO Wireless Manuel utilisateur

SonicWALL

SonicWALL NSA 2650 Manuel utilisateur

SonicWALL

SonicWALL SuperMassive 9800 Manuel utilisateur

SonicWALL

SonicWALL TZ 180 Manuel utilisateur

SonicWALL

SonicWALL 1RK33-0D9 Manuel du propriétaire

SonicWALL

SonicWALL SMA 210 Guide de référence rapide

SonicWALL

SonicWALL NSsp 12000 Manuel utilisateur

SonicWALL

SonicWALL TZ 170 SP Manuel utilisateur

SonicWALL

SonicWALL CSa 1000 Manuel d'utilisation et d'entretien

SonicWALL

SonicWALL Email Security 800 Manuel utilisateur

SonicWALL

SonicWALL TZ 100 / 200 Manuel utilisateur

SonicWALL

SonicWALL SuperMassive 9200 Manuel utilisateur

SonicWALL

SonicWALL TZ 100 Series Manuel utilisateur

SonicWALL

SonicWALL TZ 170 Manuel utilisateur

SonicWALL

SonicWALL TZ 150 Wireless Manuel utilisateur

SonicWALL

SonicWALL Secure Mobile Access 6210 Manuel utilisateur

SonicWALL

SonicWALL SSL-IA Instructions d'installation

Manuels Pare-feu populaires d'autres marques

Cisco

Cisco S190 Manuel utilisateur

Fortinet

Fortinet FortiGate Voice Series Manuel utilisateur

ADTRAN

ADTRAN NetVanta 2300 Manuel utilisateur

SecureLogix

SecureLogix ETM System Manuel utilisateur

NETGEAR

NETGEAR ProSafe FVX538 Manuel utilisateur

Lanner

Lanner FW-8877 Manuel utilisateur

Huawei

Huawei USG6000 Series Manuel d'installation et d'exploitation

H3C

H3C SecPath F5000-AI-15 Manuel utilisateur

Nexcom

Nexcom DNA 1150 Manuel utilisateur

Fortinet

Fortinet FortiGate-60 series Manuel utilisateur

Cisco

Cisco 3110 Manuel

Draytek

Draytek Vigor2860 Series Manuel utilisateur

Lanner electronics

Lanner electronics FW-7650 Series Manuel utilisateur

Swisscom

Swisscom Internet Backup Manuel utilisateur

DPtech

DPtech FW1000 SERIES Manuel utilisateur

FEITIAN

FEITIAN MultiPass FIDO Manuel utilisateur

EBLOCKER

EBLOCKER PRO Manuel utilisateur

GTA

GTA GB-200 Manuel utilisateur