3 OUT L/R: Over-Heating Protection Indicator
OUT L or OUT R orange LED light is on = Normal
OUT L or OUT R red LED light is on = Over-heating protection (Both the
output relay and the main power supply are shut down)
4 I/O TRIGGER
The trigger connection on the SGP1 can be used as an input. The
TRIGGER can be used to turn the SGP1 on or off automatically in
sequence with other audio system components
The jack is 3.5 mm TRS connector. The sleeve is wired to chassis ground
and there is no connection to the power ground ring
1 Dimensions(Containing Protrusion): 350 * 260 * 125 mm
2 Weight(Packaging and Accessories are not Included): 8 Kg
3 Rated Output Power(Maximum Undistorted Output):
240 W x 2 @ 4 Ω; 120 W x 2 @ 8 Ω
4 SNR(Full Rated Power Output): 130 dB, A-Wt., 20 ~ 20k Hz
5 THD+N(Full Rated Power Output):
< -110 dB(< 0.0003%), A-Wt., 20 ~ 20k Hz
6 Output Current(Load Impedance ≥2 Ω): 8.5A Peak Output Current per Channel
7 Output Voltage(Full Rated Power Output):
95 Vpp Peak-to-Peak Output per Channel
8 Output Configuration(Patented Driver Module):
Bipolar 4-Parallel Push-Pull per Channel
9 Frequency Response(@ 20 ~ 20k Hz): ± 0.12 dB @ 8 Ω; ± 0.13 dB @ 4 Ω
10 Crosstalk: -145 ~ -120 dB@ 1k ~ 20k Hz
11 Input Sensitivity(Fixed Gain Output): 2.5 Vrms or 28 dB
12 Input Impedance(Fixed Gain Output): 20k Ω
13 Environmental: 0℃to 50℃Ambient Temperature
Up to 80% Humidity, Non-condensing
05 TYPICAL APPLICATIONS
08
04 SPECIFICATIONS
