1 The multi-function knob button
Press the knob once and rotate it that will switch between the 5 options
Loop switching : V(Volume)-G(Gain)-IN(Inputs)-OUT(HPA)-PRE(Pre-Amp)
QXA1 has memory function, the last status and parameters will be
memorized even if the power goes off
Long press the knob about 6 seconds will reset the system
02
3 Gain adjustment (default: 0dB)
Press the knob once and rotate it to “G” icon flashes, press it and then rotate
it to adjust the gain
The gain range: 0~+12dB (0.5dB/step)
If you want to adjust the volume again: press the knob once and rotate it to
“V” icon flashes, press it again and then rotate it to adjust the volume
4 Analog inputs(RCA/XLR) switching (default: RCA)
Press the knob once and rotate it to “IN” icon flashes; press it and then
rotate it to “RCA” or “XLR” icon flashes; press it again to confirm the input
5 HPA outputs(SE/BAL) switching (default: SE)
Press the knob once and rotate it to “OUT” icon flashes; press it and then
rotate it to “SE” or “BAL” icon flashes; press it to confirm the HPA output
6 PRE output(RCA) enable/disable (default: disable)
Press the knob once and rotate it to “PRE” icon flashes, then press it and
the PRE output is enable, the “PRE” icon is always on
Repeat the above operation, the PRE output is disable and the “PRE” icon
goes out
2 Volume adjustment (default: -99.75dB)
Volume up and down when the knob is turned right or left(default)
The volume range: -99.75dB~0dB (0.25dB/step@Gain=0/6dB)
7 Mute function(HPA/PRE)
Press the knob once and the QXA1 will be in silent mode
In silent mode, the “V” or “G” indicator will keep flashing and the screen
gradually darkens, then the screen goes out within about 60 seconds
03 SPECIFICATIONS
