Sonance ThinLIne Series Manuel utilisateur

Determine the location of the 3” ex bracket and subwoofer.

Ensure there is adequate space to accommodate the

subwoofer and port tube within the 2 x 4 stud bay or joists,

allowing at least 7-9” from the front edge of the BPS6 TL

to the location of the ex bracket opening. (See Figure 1).

Box Contents

(1) Quickstart Guide

(1) Bandpass Subwoofer with port tube

(1) Cardboard mounting template

MOUNTING SCREWS & WASHERS:

(4) 5/16” x 3” lag screws

(4) 5/16” washers

BPS6 TL QUICKSTART GUIDE FOR USE WITH VISUAL

PERFORMANCE SERIES BANDPASS CONNECTORS

BANDPASS SUBWOOFER THINLINE (VP)

Place the subwoofer mounting template on the side of a

2 x 4 stud or joist and drill four 1/4” (6mm) holes through the

locations shown on the mounting template. (See Figure 2).

Hold the side of the BPS6 TL Subwoofer with the rubber

damping pad up against the side of the 2 x 4 stud and

install the four lag screws and washers to secure the

BPS6 TL Subwoofer in place. (See Figure 3).

7-9” (177-228mm)

BPS6 TL

Port Tube

Flex Bracket

NOTE: IF IT IS NOT POSSIBLE TO LOCATE THE BPS6 TL SUBWOOFER

7-9” AWAY FROM THE FLEX BRACKET OPENING, EXTRA HOSE

MATERIAL (UP TO 3”) MAY BE REMOVED. WHILE IT IS OKAY TO

SHORTEN THE HOSE, NEVER EXTEND THE HOSE LENGTH.

NOTE: DRILLING FROM THE INSIDE OF THE STUD BAY IS

RECOMMENDED TO ENSURE THAT THE HOLE LOCATIONS MATCH

THE SUBWOOFER SCREW LOCATIONS.

NOTE: BE SURE THAT THE SUBWOOFER TEMPLATE IS FLUSH WITH

THE EDGE OF THE STUD OR SLIGHTLY RECESSED.

Attach the 3” ex bracket to the 2 x 4 stud or joists in

the predetermined location. Check that the mounted

distance allows for the port tube to pass through the

bracket with at least 4 ribs of the tube exposed.

(See Figure 4).

Figure 1

Figure 2

Figure 3

Figure 4

Template

all features and specications are subject to change without notice. For the latest Sonance product specication information visit our website: www.sonance.com

SONANCE • 991 Calle Amanecer • San Clemente, CA 92673 USA • PHONE: (949) 492-7777 • FAX: (949) 361-5151 • Technical Support: (949) 492-7777 10.24.17

The BPS6 TL ships with a tether inserted into the end

of the port tube. Use the tether to guide the port tube

into the ex bracket. Loop and pull the tether all the

way until port tube lies rmly on the ex bracket.

Tie the tether into a knot. This process ensures that

other tradespersons won’t infringe on the port tube

assembly area. (See Figure 5).

BPS6 TL QUICKSTART GUIDE FOR USE WITH VISUAL PERFORMANCE SERIES BANDPASS CONNECTORS

Attach the four conductor speaker wire to the input

terminals; positive wires to red terminals and negative

wires to black terminals. Run a signal test using an

amplied program material for at least 60 seconds.

Secure the speaker wire to the zip tie attached to the

subwoofer cabinet to prevent accidental removal.

(See Figure 6).

After drywall and paint is complete, install bandpass

connector (sold separately; Sonance model

VPBPC3R TL SKU# 93334) to the port tube through

the ex bracket.

For Visual Performance bandpass connector

installation details visit www.sonance.com/

in-wall-in-ceiling/bps6-tl

33-7940

LEFT

BPS6TL

RIGHT

MADE IN CHINA

Included

zip tie

for wire

NOTE: PORT TUBE CONTAINS FOAM PLUG WITH A TETHER, MAKE

SURE PRESSURE LEVELS DON’T EXPEL THE FOAM PLUG AND TETHER.

Tether into ex

bracket loop

Foam

Figure 5

Figure 6

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sonance Subwoofer

Sonance

Sonance The Sub Manuel utilisateur

Sonance

Sonance Cinema Series CINEMA SUB Manuel utilisateur

Sonance

Sonance Cinema Series SUB 10-150 Manuel utilisateur

Sonance

Sonance HS10SUB Manuel utilisateur

Sonance

Sonance LS15SUB Manuel utilisateur

Sonance

Sonance RK10W Manuel utilisateur

Sonance

Sonance LS12T SUB Manuel utilisateur

Sonance

Sonance BPS6 Manuel utilisateur

Sonance

Sonance Cinema Series SUB 12-250 Manuel utilisateur

Sonance

Sonance BPS6 TL Manuel utilisateur

Sonance

Sonance BPS-1 Manuel utilisateur

Sonance

Sonance HS12T SUB Manuel utilisateur

Sonance

Sonance VP10SUB Manuel utilisateur

Sonance

Sonance BPS6 Manuel utilisateur

Sonance

Sonance Cinema Series SUB 10-150 Manuel utilisateur

Sonance

Sonance Landscape LSV10SUB Manuel utilisateur

Sonance

Sonance INVISIBLE IS8T Series Manuel utilisateur

Sonance

Sonance Landscape Series Manuel utilisateur

Sonance

Sonance BPS-1 Manuel utilisateur

Sonance

Sonance Sonance Landscape Series LS12ESUB Manuel utilisateur

Sonance

Sonance VP10SUB Manuel utilisateur

Sonance

Sonance Bandpass Subwoofer BPS-1 Manuel utilisateur

Sonance

Sonance LS47SAT Manuel utilisateur

Sonance

Sonance BPS6 Manuel utilisateur

Manuels Subwoofer populaires d'autres marques

Sony

Sony XS-AW8 Manuel utilisateur

Sony

Sony XS-L836 Manuel utilisateur

B&C Speakers

B&C Speakers 15 HPL 76W Manuel utilisateur

Velodyne

Velodyne DD-18+ Manuel utilisateur

Hifonics

Hifonics HW-12 Guide de démarrage rapide

Magnat Audio

Magnat Audio ADR 130 BP Manuel utilisateur

Blitz

Blitz BZP106 Manuel utilisateur

Technics

Technics SB-AS500 Manuel utilisateur

Lyngdorf

Lyngdorf BW-2 Manuel utilisateur

Lyngdorf

Lyngdorf BW-3 Manuel utilisateur

Pyle Pro

Pyle Pro PYLE PRO PDW15125 Manuel utilisateur

REL Acoustics

REL Acoustics Q Series Manuel utilisateur

Pioneer

Pioneer Elite S-W1EX Manuel utilisateur

L-Acoustics

L-Acoustics KIVA SB15M Guide de démarrage rapide

B&C Speakers

B&C Speakers Woofer 12 HPL 76 Manuel utilisateur

KEF

KEF KUBE 200 Manuel utilisateur

Yamaha

Yamaha SW500 Manuel utilisateur

Adam

Adam Sub15 Manuel utilisateur