1. WARNINGS & SYMBOLS
CAUTION: IMPORTANT SAFETY INSTRUCTIONS
This warning symbol indicates that the reader should be cautious. Please take notice
of the fact that when you use an item labelled with this symbol, improper use may
cause bodily injury. Before you work on any equipment, be aware of the hazards
involved
with electrical circuitry and be familiar with standard practices for
preventing accidents.
CAUTION: CLASS 1 LASER PRODUCT
This warning indicates caution is necessary. There is visible laser radiation present.
Avoid long term viewing of the laser.
DO NOT DISPOSE
This symbol indicates that you may not dispose the equipment as unsorted
municipal waste as per 2002/96/EC (WEEE directive). For proper recycling, return the
equipment to your local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information see:
www.recyclethis.info.
RECYCLING
This symbol indicates that the equipment (packaging) may require recycling in
accordance with you own local laws. Contact your local regulatory authorities for
more information.
#31 = Paper or Fibreboard / Plastic
CE MARK
This symbol indicates that Solid Optics EU N.V. tested the equipment in accordance
with applicable European standards and it is safe. The CE-symbol indicates that this
product also complies with the requirements of Directive 2014/30/EU.
generate, or is not affected by, electromagnetic disturbance.
FCC MARK
This symbol indicates that Solid Optics EU N.V. tested the equipment in accordance
with the applicable Federal Code Of Regulation (CFR) FCC 47 Part 15, subpart B and it
is safe. The FCC-
symbol indicates that the electromagnetic interference from the
product is under limits approved by the Federal Communications Commissio
n. It
does not generate, or is not affected by, electromagnetic disturbance.
This symbol indicates that the equipment complies with Directives 2011/65/EU (RoHS
II) and 2002/95 EC (RoHS I).
Laser Class 1 LASER CLASS 1
This symbol indicates that the equipment complies with 21 CFR 1040.10 and 1040.11,
except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
This symbol indicates that the user should only (dis)connect the equipment in an EPA
(ESD Protected Area), while using only certified equipment and taking all necessary
precautions.
