Solectek SKYWAY-XL100t Manuel utilisateur
1
SKYWAY-XL100t 5.9GHz
Point-to-Point (PTP) Wireless Kit
User’s Guide
October, 2014
Rev 1.2
2
Notice
This document contains information that is proprietary to Solectek Corporation.
No part of this publication may be reproduced, modified, or distributed without prior written authorization
of Solectek Corporation.
This document is provided as is, without warranty of any kind.
Registered Trademarks
Solectek® is a registered trademark of Solectek Corporation.
SkyWay® is a registered trademark of Solectek Corporation.
Other trademark names mentioned in this publication are owned by their respective holders.
Statement of Conditions
The information contained in this document is subject to change without notice.
Solectek Corporation shall not be liable for errors contained herein or for incidental or consequential
damage in connection with the furnishing, performance, or use of this document or equipment supplied
with it.
Information to User
Any changes or modifications of equipment not expressly approved by the manufacturer could void the
user’s authority to operate the equipment and the warranty for such equipment.
Disclaimer
In accordance with Solectek’s continuing efforts for improving its products, the information contained in
this document is subject to change without notice. However, Solectek assumes no responsibility or
liability for any errors or inaccuracies that may appear in this document.
Copyright © 2011-2014 by Solectek Corporation. All rights reserved.
Headquarters:
Solectek Corporation
8969 Kenamar Dr, Suite 113
San Diego, CA 92121
858.450.1220 (tel)
www.solectek.com
sales@solectek.com
3
Contents
Contents .....................................................................................................................................3
1. Product Overview....................................................................................................................5
1.1 SkyWay-XL100t Main Features.....................................................................................5
1.2 Applicable Models.........................................................................................................5
1.3 Radio Packaging Content .............................................................................................6
1.4 Management Platform Requirement..............................................................................6
2. Summary of Installation Steps.................................................................................................7
3. System Connections ...............................................................................................................9
3.1 Port Description.................................................................................................................9
3.2 Connecting the SkyWay Unit to Network ...........................................................................9
3.3 Initial Log-in.....................................................................................................................10
4. Bench testing ........................................................................................................................12
5. Physical Installation...............................................................................................................14
5.1 Introduction......................................................................................................................14
5.2 Ethernet Cable / Feedthrough Assembly .........................................................................15
5.3 Mounting Bracket and Tools ............................................................................................16
5.4 Unit Mounting ..................................................................................................................17
5.3 Mounting of Separate Antennas ......................................................................................18
6. IP Configuration ....................................................................................................................19
7. Wireless Configuration ..........................................................................................................20
8. Access Control......................................................................................................................24
9. Security.................................................................................................................................24
10. Spectrum Analysis ..............................................................................................................26
11. Antenna Alignment..............................................................................................................28
12. Verifying Operation .............................................................................................................29
12.1 Main Status Screen .......................................................................................................29
13. Quality of Service (QoS)......................................................................................................35
14. Advanced Modes ................................................................................................................40
15. Telnet..................................................................................................................................43
16. SNMP .................................................................................................................................43
17. Network Time......................................................................................................................45
4
18. Password Management.......................................................................................................46
19. Upgrading the Software.......................................................................................................48
20. System Reboot ...................................................................................................................50
21. Event Log............................................................................................................................50
22. Log/Configuration Transfer..................................................................................................52
23. Diagnostics .........................................................................................................................53
Appendix A: Factory Configuration...........................................................................................55
Appendix B: Telnet Commands................................................................................................56
Appendix C: Regulatory Information.........................................................................................62
5
1. Product Overview
Congratulations on your purchase of Solectek’s SkyWay XL100t PTP Radio System, a feature
rich, best-in-class wireless solution. This User’s Guide will describe the operation of your
SkyWay unit in detail.
1.1 SkyWay-XL100t Main Features
The SkyWay-XL100t radio’s main features are as follows:
•Field proven OFDM modulation allowing high capacity, near line-of-sight deployment
and strong immunity to multi-path.
•MIMO architecture for increased capacity
•Power over Ethernet (PoE) for simplified cable routing.
•Integrated antenna/radio simplifies installation and eliminates lossy RF coax runs.
•Frame aggregation for enhanced data throughput.
•Line speed QoS packet inspection prioritizes latency sensitive, real-time data.
•GPS-based radio location tracking
•Intuitive Web based user interface and Telnet CLI.
1.2 Applicable Models
XL5910 radio w/ 23dBi dual-pol antenna XL5930 radio w/ 20dBi dual-pol antenna
6
1.3 Radio Packaging Content
The following items are included in each PTP kit package. Please contact Solectek Sales if
there is any missing item.
•SkyWay Radio unit (2)
•Power over Ethernet (PoE) injector + AC to 48V DC power supply (2)
•Pre-assembled, bracket-based mast mounting kit (2)
•Cat5 weatherproofing feedthrough / gland (2)
•Coax/grommet seals
•Warranty and Compliance Card.
NOTE - The requisite Cat5e or CAT6 Ethernet cables are not included in the
package. Please contact Solectek for information on available outdoor grade, RF-
shielded Ethernet cables. Customers can purchase these cables directly from
Solectek or from other sales channels.
1.4 Management Platform Requirement
•GUI/Telnet management
1. Hardware - Pentium IV (or better) PC;
2. OS – Windows XP SP2/SP3 or later; Windows 7 Professional 32 or 64 bit or later
3. Web Browser
•SNMP monitoring: SNMP v2c compatible SNMP manager, running on appropriate
PC/Server platform.
7
2. Summary of Installation Steps
This section summarizes the steps needed to properly configure and install the SkyWay
XL100t Radio. As the background and guidelines for much of the radio installation process
are well covered in many in-depth publications and training classes, only those steps that
uniquely relate to the SkyWay product are covered in this User Guide.
NOTE: Per FCC Part 90.377, this product should NOT be installed at a height not
exceeding 8 meters above the roadway bed surface.
A. System Design
•Requirements analysis
•Site Survey
•RF System Design
•IP Network Design
•Physical/Electrical engineering design
B. Unit Preparation
•Unit connection
•Initial Configuration
•Bench testing
C. Site Preparation
•Physical mounting prep
•Electrical prep
•Cable routing
D. Installation
•Unit Mounting
•Spectrum Analysis
•Antenna alignment
E. Verification
•Link status + metrics
•Ping connectivity
•Performance testing
8
•Reliability monitoring
F. Optimization
•RF channel tuning
•Data rate tuning
•QoS
G. Management + Maintenance
•Upgrades
•Access Methods
•Tools
•Diagnostics
9
3. System Connections
3.1 Port Description
SkyWay-XL100t radio unit has the following access ports:
•(1) 10/100/ Fast Ethernet + Power Connector
•(1) GPS RF port to be connected to a GPS antenna
The RJ45 connector is accessed at the bottom of the unit, through a multi-piece
waterproofing feed-through. If included, the RF Ports are accessed on the bottom of the unit,
which is shown below.
Unit Bottom View – physical interfaces shown
3.2 Connecting the SkyWay Unit to Network
Use the diagram below as a guide to cable your SkyWay test system using a PC or Laptop
and a pair of Cat5e/6 cables. An auto-MDIX feature eliminates the need for cross-over
cables.
10
C
ONNECTION
D
IAGRAM FOR
M
ASTER UNIT AND
S
LAVE
PTP
UNITS
3.3 Initial Log-in
•Open networking properties in your Windows OS. Enter the TCP/IP setup window of
your wired Ethernet adapter properties page. Set the IP addresses to the following
values.
IP Address Setup on your Computer
Ethernet IP Address 192.168.1.1
Subnet Mask 255.255.255.0
•Open a Web Browser on the Test PC
At the URL line, type in the following:
Type of Unit Default IP Address
Slave Unit 192.168.1.100
Master Unit 192.168.1.200
Table des matières
Autres manuels Solectek Matériel réseau
Manuels Matériel réseau populaires d'autres marques
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuel utilisateur
Yudor
Yudor YDS-16 Manuel utilisateur
D-Link
D-Link ShareCenter DNS-320L Manuel utilisateur
Samsung
Samsung ES1642dc Instructions d'utilisation
Honeywell Home
Honeywell Home LTEM-PV Instructions de montage
