Solar-Log 350 Manuel utilisateur
Installation Manual
Solar-Log® Socket Meter
Installation Manual
Solar-Log® Socket Meter
2
Table of Contents
Getting Started 4
Required hardware 4
Before you begin 4
Installation Guide 5
Safety Precautions 5
Meter Installation 6
Solar-Log 350 (and Solar-Log 350 LAN) 7
Wiring Diagram 8
Step by Step 9
Solar-Log 360 10
Wiring Diagram 11
Step by Step 12
Solar-Log 370 13
Wiring Diagram 14
Optional Connections to External Devices 15
Step by Step 16
Device Detection 18
Conrm Cellular Connection When Using LAN Communication 19
3
Solar-Log® Socket Meter LCD Status 20
Troubleshooting 21
Solar-Log® WEB Registration (Before or After Installation) 22
Warranty 24
Technical Support
For additional support please visit www.solar-log-america.com under the Service &
Support tab, and our experts will provide answers to any questions concerning Solar-Log®
products or call our technical support team at (203) 702-7189.
Online Support
www.t-mobile.com/coverage.html
www.att.com/maps/wireless-coverage
www.solar-log-america.com/service-support
4
Getting Started
Required Hardware
• 2S socket meter base - 240/120V single phase (not included)
Before You Begin
Check electrical specification
• 240/120V single phase
• Max plant size 48 kW (200 A)
Check cellular coverage depending on installed SIM card
• Onsite with cellphone – must have 2 bars of signal showing GPRS/E/3G/4G or LTE
• T-Mobile: offsite at www.t-mobile.com/coverage.html
• AT&T: offsite at www.att.com/maps/wireless-coverage
If cellular coverage is not available, please use Solar-Log 350 LAN (Part No. 823210) or
Solar-Log 370 (Part No. 225852) and connect to an internet router via Ethernet.
5
Installation Guide
Safety Precautions
DANGER! Lethal voltage inside the meter!
Thoroughly read and understand this guide before installing and operating
the unit.
Follow all instructions and safety precautions in this guide.
Prior to performing any work turn off all power supplying the equipment in which the
meter is to be installed.
Only qualied personnel should work on the meter and should be familiar with the technol-
ogy and the hazards associated with electrical equipment.
Beware of potential hazards and wear personal protective equipment.
Only connect the meter as described in this manual.
Hazardous voltages can cause shock, burns or death. To prevent exposure to hazardous
voltages, disconnect and lock out all power sources before servicing and removing com-
ponents.
Modications made to the product may void the warranty.
All work must be done in accordance to state and local code and safety practices.
Never work alone and before performing any tests, installation or maintenance on this equipment, isolate or dis-
connect all hazardous live circuits and sources of electric power. Assume that all circuits are live until they have
been completely de-energized, tested, and tagged. Pay particular attention to the design of the power system.
Consider all sources of power, including the possibility of back feed.
6
Meter Installation
Warning: The Solar-Log® Socket Meter contains lethal voltages. The meter
should never be disassembled. Failure to observe this practice can result
in serious injury or death. Do not interchange base and electronics module
assemblies between meters. Calibration data stored in meter is particular to a matched
base assembly and electronics module. Interchanging these components causes the meter
to lose calibration.
The meter is plugged into a single phase, 3 wire, 2S meter socket using standard meter
installation practices. The meter base has current and potential terminals extending out-
side from the back of the meter. These terminals engage with the socket jaws, which are
connected to the service lines. The socket jaws provide heavy contact force with the help
of spring.
Refer to page 7 for installing a Solar-Log 350 (or Solar-Log 350 LAN)
Refer to page 10 for installing a Solar-Log 360
Refer to page 13 for installing a Solar-Log 370
7
Solar-Log 350 (and Solar-Log 350 LAN)
The Solar-Log 350 is a universal monitoring device for PV production and reporting. This
easy to install device is compatible with all residential solar PV inverters and does not
require on-site con guration.
8
Wiring Diagram
Notice: The wiring diagram includes rudimentary connection diagrams and is not intended
as an installation guide. The diagrams are shown for informational purposes only.
*Internet Router is not provided
**Solar-Log 350 LAN is only recommended when cellular service is weak or unavailable onsite.
9
Step by Step
Step 1
Switch main breaker OFF
in distribution panel and
ensure all other voltage
sources are off.
Step 2
Install socket & electrical
wiring according to local
and national electric code
Step 3
Plug Solar-Log 350 & GE
Meter into socket and re-
place cover
Step 4
Switch main breaker ON in
distribution panel
Step 5
Check meter LCD display to
verify line voltage & power.
See pg 20.
Step 6
Check LEDs (located at
bottom)
Flashing Green (for Solar-Log 350)
Waiting for cellular connection
Solid Green (for Solar-Log 350)
Using Cellular Connection
Green with Quick Blink Every 5
Seconds (for Solar-Log 350 LAN)
Using LAN Connection
Other LEDs
See Troubleshooting
10
Solar-Log 360
The Solar-Log 360 is a universal monitoring device for PV production and home consump-
tion. This easy to install device is compatible with all residential solar PV inverters and
does not require on-site con guration. Included with the Solar-Log 360 is a Solar-Log 10
(bi-directional meter) and 2 current transducers (CTs) for measuring home consumption.
The Solar-Log 360 is a universal monitoring device for PV production and home consump-
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Solar-Log Instrument de mesure
Solar-Log
Solar-Log PRO380-Mod-CT Manuel utilisateur
Solar-Log
Solar-Log PRO1 Manuel utilisateur
Solar-Log
Solar-Log PRO1 Manuel utilisateur
Solar-Log
Solar-Log Pro 380 Manuel utilisateur
Solar-Log
Solar-Log PRO380-CT Manuel utilisateur
Solar-Log
Solar-Log PRO380 Manuel utilisateur
Solar-Log
Solar-Log PRO380-CT Manuel utilisateur
Solar-Log
Solar-Log 2000 Manuel utilisateur
Solar-Log
Solar-Log 1000 Manuel utilisateur
Solar-Log
Solar-Log PRO2 Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur