Sokkia SRX1 Manuel utilisateur

SURVEYING INSTRUMENTS

Class 3R Laser Product

Class 1 LED Product OPERATOR'S MANUAL

Series SRX

SRX1

SRX2

SRX3

SRX5

Total Station

H18.09.21

Li-ion S Li-ion

This is the mark of the Japan Surveying

Instruments Manufacturers Association.

Class 3R Laser Product

Class 1 LED Product

SURVEYING INSTRUMENTS

Series SRX

SRX1

SRX2

SRX3

SRX5

Total Station

OPERATOR’S MANUAL

• Thank you for selecting the SRX1/2/3/5.

• Before using the instrument, please read this operator’s manual carefully.

• Verify that all equipment is included.

"26. STANDARD EQUIPMENT"

• SRX has a function to output data saved in Program mode (SDR) to a connected

host computer. Command operations from a host computer can also be

performed. For details, refer to “Interfacing with the SOKKIA SDR Electronic Field

Book” and “Command Explanations” manuals and ask your Sokkia agent.

• The specifications and general appearance of the instrument may be altered at

any time and may differ from those appearing in brochures and this manual.

• Some of the diagrams shown in this manual may be simplified for easier

understanding.

HOW TO READ THIS MANUAL

Regarding other manuals

•Manuals 2, 3, and 4 below are electronic manuals provided on a CD-ROM in PDF format ( ).

•The SRX comes equipped with 4 manuals for operation information:

1. SRX Operator’s Manual (this manual):

Explains basic operation and functions of the SRX.

2. Series SRX SDR Software Reference Manual :

Explains advanced measurement operations using the SRX in Program mode (SDR), and

methods for managing measured data.

3. SFX Dial-Up Program Explanations :

Explains how to send and receive data using the SFX function

4. Series SRX Quick Manual :

Simplified explanations of operations such as Auto-Tracking to allow users to get started

straight away.

Symbols

The following conventions are used in this manual.

[Softkey] etc. : Indicates softkeys on the display and window dialog buttons.

{Key} etc. : Indicates keys on the operation panel.

<Setting out> etc.: Indicates screen titles.

Notes regarding manual style

• Except where stated, “SRX” means “SRX1/SRX2/SRX3/SRX5” in this manual.

• Screens and illustrations appearing in this manual are of SRX3.

• Location of softkeys in screens used in procedures is based on the factory setting. It is possible to

change the allocation of softkeys.

Softkey allocation: "21.6 Allocating Key Functions"

• Kodak Gray Card: KODAK is a registered trademark of Eastman Kodak Company.

:Indicates precautions and important items which should be read before

operations.

: Indicates the chapter title to refer to for additional information.

: Indicates supplementary explanation.

: Indicates an explanation for a particular term or operation.

iii

SURVEYING INSTRUMENTS

• Bluetooth: Bluetooth®is a registered trademark of Bluetooth SIG, Inc.

•Windows CE®is a registered trademark of Microsoft Corporation.

• All other company and product names featured in this manual are registered trademarks of each

respective organization.

Operation procedure

• Learn basic operations in "4. PRODUCT OUTLINE" and "5. BASIC OPERATION" before you read

each measurement procedure. An overview of the available SRX functions is given in

"4.1 Functions". For selecting options and inputting figures, see "5.1 Basic Key Operation".

• For Auto Tracking measurement, read this manual in conjunction with the On-demand Remote

Control System Manual.

• Measurement procedures are based on continuous measurement. Some information about

procedures when other measurement options are selected can be found in “Note” ().

CONTENTS

1. PRECAUTIONS FOR SAFE OPERATION ................. 1

2. PRECAUTIONS........................................................... 4

3. LASER SAFETY INFORMATION ............................... 6

4. PRODUCT OUTLINE ................................................. 8

4.1 Functions ........................................................................... 8

4.2 Parts of the Instrument .................................................... 10

4.3 Mode Configuration ......................................................... 15

4.4 Bluetooth Wireless Technology ....................................... 16

5. BASIC OPERATION ................................................. 18

5.1 Basic Key Operation ....................................................... 18

5.2 Display Functions ............................................................ 23

5.3 Inputting Characters using SIP Code (Input Panel) ........ 29

5.4 SETTINGS Mode ............................................................ 30

6. USING THE CF CARD SLOT ................................... 32

6.1 Inserting/Removing the CF Card ..................................... 32

7. USING THE BATTERY ............................................ 34

8. CONNECTING TO EXTERNAL DEVICES ............... 36

8.1 Wireless Communication using Bluetooth Technology ... 36

8.2 Communication between the SRX and Companion Device

......................................................................................... 40

8.3 Connection via RS-232C cable ....................................... 42

8.4 Connecting to USB devices ............................................ 42

9. SETTING UP THE INSTRUMENT ........................... 44

9.1 Centering ......................................................................... 44

9.2 Levelling .......................................................................... 45

10. POWER ON/OFF ..................................................... 48

10.1 Resolving Software Issues .............................................. 49

10.2 Configuring the Touch Panel ........................................... 49

10.3 Powering the SRX ON/OFF from an External Instrument 50

11. TARGET SIGHTING ................................................. 51

11.1 Auto Pointing Settings ..................................................... 52

11.2 Auto-Pointing Function for Target Sighting ..................... 54

11.3 Manually Sighting the Target .......................................... 55

12. MEASUREMENT WITH AUTO TRACKING ............. 56

CONTENTS

12.1 Auto Tracking Settings .................................................... 56

12.2 Measurement with Auto Tracking .................................... 57

13. ANGLE MEASUREMENT ........................................ 60

13.1 Measuring the Horizontal Angle between Two Points

(Horizontal Angle 0°) ....................................................... 60

13.2 Setting the Horizontal Angle to a Required Value (Horizontal

Angle Hold) ..................................................................... 62

13.3 Turning the Instrument from the Reference Angle to a

Specified Angle ............................................................... 64

13.4 Angle measurement and Outputting the Data ................. 65

14. DISTANCE MEASUREMENT .................................. 66

14.1 Returned Signal Checking .............................................. 66

14.2 Distance and Angle Measurement .................................. 68

14.3 Using the Guide Light ...................................................... 68

14.4 REM Measurement ......................................................... 70

14.5 Distance Measurement and Outputting the Data ............ 70

15. COORDINATE MEASUREMENT ............................. 73

15.1 Entering Instrument Station Data .................................... 73

15.2 Azimuth Angle Setting ..................................................... 74

15.3 3-D Coordinate Measurement ......................................... 77

16. RESECTION MEASUREMENT ................................ 79

16.1 Coordinate Resection Measurement ............................... 80

16.2 Height Resection Measurement ...................................... 84

17. SETTING-OUT MEASUREMENT ............................ 89

17.1 Using the Guide Light ...................................................... 89

17.2 Distance Setting-out Measurement ................................. 90

17.3 Coordinates Setting-out Measurement ........................... 96

17.4 REM Setting-out Measurement ....................................... 99

18. OFFSET MEASUREMENT .................................... 102

18.1 Single-distance Offset Measurement ............................ 102

18.2 Angle Offset Measurement ........................................... 104

18.3 Two-distance Offset Measurement ............................... 106

19. MISSING LINE MEASUREMENT .......................... 109

19.1 Measuring the Distance between 2 or more Points ...... 109

19.2 Changing the Starting Point .......................................... 111

20. SURFACE AREA CALCULATION ......................... 113

CONTENTS

21. CHANGING THE SETTINGS ................................. 118

21.1 Observation Conditions ................................................. 118

21.2 Instrument Configuration ............................................... 120

21.3 EDM Settings ................................................................ 123

21.4 Allocating User-defined Tabs ........................................ 126

21.5 Customizing Screen Controls ........................................ 129

21.6 Allocating Key Functions ............................................... 131

21.7 Units .............................................................................. 134

21.8 Date and Time ............................................................... 135

21.9 Changing Password ...................................................... 135

21.10 Restoring Default Settings ............................................ 136

22. WARNING AND ERROR MESSAGES .................. 137

23. CHECKS AND ADJUSTMENTS ............................ 140

23.1 Plate Level .................................................................... 140

23.2 Circular Level ................................................................ 141

23.3 Tilt Sensor ..................................................................... 142

23.4 Collimation .................................................................... 145

23.5 Reticle ........................................................................... 147

23.6 CCD reticle .................................................................... 149

23.7 Optical Plummet ............................................................ 151

23.8 Additive Distance Constant ........................................... 152

24. Power Supply System ............................................ 154

25. Target System ........................................................ 155

26. STANDARD EQUIPMENT ..................................... 157

27. Optional Accessories .............................................. 159

28. SPECIFICATIONS .................................................. 161

29. REGULATIONS ...................................................... 168

30. EXPLANATION ...................................................... 173

30.1 Manually Indexing the Vertical Circle by Face Left, Face

Right Measurement ....................................................... 174

30.2 Atmospheric Correction for High Precision Distance

Measurement ................................................................ 175

31. INDEX .................................................................... 177

1. PRECAUTIONS FOR SAFE OPERATION

For the safe use of the product and prevention of injury to operators and other persons as well as

prevention of property damage, items which should be observed are indicated by an exclamation point

within a triangle used with WARNING and CAUTION statements in this operator’s manual.

The definitions of the indications are listed below. Be sure you understand them before reading the

manual’s main text.

Definition of Indication

General

WARNING Ignoring this indication and making an operation error could possibly

result in death or serious injury to the operator.

CAUTION Ignoring this indication and making an operation error could possibly

result in personal injury or property damage.

This symbol indicates items for which caution (hazard warnings inclusive) is urged.

Specific details are printed in or near the symbol.

This symbol indicates items which are prohibited. Specific details are printed in or near

the symbol.

This symbol indicates items which must always be performed. Specific details are printed

in or near the symbol.

Warning

Do not use the unit in areas exposed to high amounts of dust or ash, in areas where there

is inadequate ventilation, or near combustible materials. An explosion could occur.

Do not perform disassembly or rebuilding. Fire, electric shock, burns, or hazardous

radiation exposure could result.

Never look at the sun through the telescope. Loss of eyesight could result.

Do not look at reflected sunlight from a prism or other reflecting object through the

telescope. Loss of eyesight could result.

Direct viewing of the sun during sun observation will cause loss of eyesight. Use a solar

filter (option), such as that in "27. OPTIONAL ACCESSORIES", for sun observation.

When securing the instrument in the carrying case make sure that all catches, including

the side catches, are closed. Failure to do so could result in the instrument falling out

while being carried, causing injury.

Caution

Do not use the carrying case as a footstool. The case is slippery and unstable so a

person could slip and fall off it.

1. PRECAUTIONS FOR SAFE OPERATION

Power Supply

Do not place the instrument in a case with a damaged catch, belt or handle. The case or

instrument could be dropped and cause injury.

Do not wield or throw the plumb bob. A person could be injured if struck.

Do not touch the instrument or look through the telescope eyepiece while the motor drive

is in operation. Hands could be caught in moving parts or an eye could be struck by the

telescope and cause injury.

Secure handle to main unit with handle locks. Failure to properly secure the handle could

result in the unit falling off while being carried, causing injury.

Tighten the adjustment tribrach clamp securely. Failure to properly secure the clamp

could result in the tribrach falling off while being carried, causing injury.

Warning

Do not disassemble, rebuild, mutilate, incinerate, heat or short circuit the battery and

charger. Fire, electric shock, burns or an explosion could result.

Do not use voltage other than the specified power supply voltage. Fire or electrical shock

could result.

Do not use damaged power cords, plugs or loose outlets. Fire or electric shock could

result.

Do not use power cords other than those designated. Fire could result.

Do not place articles such as clothing on the battery charger while charging batteries.

Sparks could be induced, leading to fire.

Use only the specified battery charger to recharge batteries. Other chargers may be of

different voltage rating or polarity, causing sparking which could lead to fire or burns.

Do not heat or throw batteries into fire. An explosion could occur, resulting in injury.

To prevent shorting of the battery in storage, apply insulating tape or equivalent to the

terminals. Otherwise shorting could occur resulting in fire or burns.

Do not use batteries or the battery charger if wet. Resultant shorting could lead to fire or

burns.

Do not connect or disconnect power supply plugs with wet hands. Electric shock could

result.

Do not use the battery, charger or AC (power) cable for any other equipment or purpose.

Fire or burns caused by ignition could result.

Do not short circuit the battery. Fire or burns caused by heat or ignition could result.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sokkia Instrument de mesure

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur