YSERIES
4
3) When “Service test” is recognized
• For models w/o display: All leds are ON. Next, Start/Stop led blinks and service test starts.
4) During the first 6” of test, if a failure code is stored in memory, its codification blinks. Also at the end
of the test if an error occurs its error code blinks.
Note: Service program can be cancelled with cancellation operation.
SALT SETTING OF YSERIES
1) Power OFF; press program button.
2) Power ON and continue to press program button at least for 3”.
3) If “Hardness set” is recognized all leds blink for 2”.
5)Press program button to set the desired level.
• For models w/ display: All leds are ON, SP is visualized on display and service test starts.
At any pressure of program button hardness level is incremented. Hardness level 1 returns after
hardness level 6.
* If it is the first hardness set, hardness level is level 3.
Release program button. The last setting level is viewed*.
4)
For models w/o display;
