Soehnle 6958 Manuel utilisateur

6958

Animal scale

User manual

www.soehnle-professional.com

Thank you for choosing this Soehnle Professional product.

Soehnle Professional is a brand of Soehnle Industrial Solutions GmbH.

This product is equipped with all features of the latest technology.

If you have any questions or if you have problems with your device that are not

covered in the operating instructions, please contact your Soehnle Industrial

Solutions service centre or our customer service.

Telephone: +49 7191 3453-220

Fax: +49 7191 3453-211

E-Mail: [email protected]bh

For further information and documentation please refer to:

https://www.soehnle-professional.com/en/site/documents

This manual has been written for the following models:

 Animal scale 6958.01.002

Please read this manual completely before installation and operation.

1. Scope of delivery ........................................................4

2. Warnings .................................................................. 4

3. General information ....................................................5

3.1 Technical Data .........................................5

3.2 Connection types.....................................6

4. Installation .......................................... .......................7

4.1 Unpacking and installation .......................7

5. Controls and functions ................................................9

5.1 Display unit and key descriptions..............9

 5.2Displaycharacterdenitions ....................10

5.3 Terminal display.......................................11

5.4 Meaning of symbols on faceplate.............11

6. Operation ................................................................12

6.1 Normal weighing mode.............................12

6.2 Count weighing mode ..............................14

6.3 Percent weighing mode............................15

6.4 BMI working mode ...................................17

6.5 HOLD function.........................................18

6.6 Accumulation ..........................................19

 6.7Weightne-tuning....................................20

7. Explanation of symbols & Troubleshooting....................21

7.1 Explanation of symbols ............................21

7.2 Troubleshooting.......................................22

Content

 Verify that the input voltage range printed on the data label matches the local

AC power to be used.

 Make sure that the power cord does not pose a potential obstacle or tripping

hazard.

 Use only approved accessories and peripherals.

 Operatetheequipmentonlyunderambientconditionsspeciedintheseins-

tructions.

 Disconnect the equipment from the power supply when cleaning.

 Do not operate the equipment in hazardous or unstable environments.

 Do not immerse the equipment in water or other liquids.

 Service should only be performed by authorized personnel.

1. Scope of delivery

2. Warnings

 Terminal 

 Platform 

 Power supply 

 User manual 

3. General information

3.1 Technical data

Max. display range -999,999to999,999

Max. display resolution 1:100,000(primaryunit)

1:125,000(secondunit)

Max. approved resolution 1:5,000

Division 0.0001,0.0002,0.0005to10,20,50

Calibration unit kg or lb

Weighing units g,lb,lb:oz,g,oz,pcs,%

Display 6-digit,7-segment,25mmheight

LCD with blue backlight

Accuracy ≤0.01%

Power supply 4x AA batteries

or AC adapter: 9V DC / 600 mA with central positive

Work current ≤15mA(backlightoff,noloadcells)

≤30mA(backlighton,noloadcells)

≤50mA(backlighton,oneloadcell)

Functions Normalweighing,counting,percentweighing,

checkweighing,BMI,Hold,Accumulation

Zero range programmable zero range

Tare range full capacity

Stabilization time < 3 seconds

Keypad [HOLD/SETUP],[PRINT/FUNC],[ACC/TOTAL],

[UNIT/DATA],[TARE/PRESET],[ZERO/ON/OFF]

Operating temperature -10°to40°C

Humidity range <90%relativehumidity,non-condensing

Load cell excitation voltage 5V DC

Load cell drive -3mV/Vto3mV/V

Recommended actual scale

interval (d)

> 1 uV / display division

Max. load cell excitation 60 mA

Signal connection 4 or 6 lead with sense leads

Real clock built-innonvolatilerealtime&date

Dimensions of scale 1.040,5x1.000mmperplatform

resp. 1.940 x 1.000 mm complete scale

Dimensions of terminal with bracket: 250 x 125 x 70 mm

without bracket: 200 x 95 x 45 mm

3.2 Connection types

7-pins socket, assigned as follows:

 Pin 1: Excitation + -

 Pin 2: Sense +

 Pin 3: Signal +

 Pin 4: Excitation -

 Pin 5: Sense -

 Pin 6: Signal -

 Pin 7: Shield 7 holes socket (Terminal) 7 pins socket (Base)

3. General information

4.1 Unpacking and installation

Caution:

Do not pull on the load cell cable and connectors during installation, as this may damage the parts.

1. Remove the two platforms 1 & 2 with the same serial number from the boxes and align them as shown

below. Remember to unplug the two connection cables and plugs on each platform..

2. Lift platform 1 as shown below and plug the connection cable of platform 2 into the connection socket on

the terminal box of platform 1.

4. Installation

3. Mount the mounting brackets as shown in the picture below to align two platforms. Note: It is

necessary that the two platforms are loosely connected.

4. Installation

4. Plug the connection cable of platform 1 into the connection socket on the display.

5.1 Display unit and key descriptions

Key Mode Description

HOLD/

SETUP

Weighing, counting

or percent mode

< 3 seconds Enters or exits HOLD mode

> 3 seconds Enters SETUP mode

Input data mode < 3 seconds Returns to last sub-menu

> 3 seconds Input decimal point

Menu selection mode Returns to last sub-menu

PRINT/

FUNC

Weighing, counting

or percent mode

< 3 seconds Sends output data via the serial port

> 3 seconds Selects mode: Weighing, counting or percent

Input data mode

Increases digit in ashing data entry position by one

Menu selection mode Returns to last item of current sub-menu

ACC/

TOTAL

Weighing, counting

or percent mode

< 3 seconds

Adds accumulation values to memory, displays

instances and totals

> 3 seconds Displays accumulation instances and totals

Input data mode

Decreases the digit in the ashing data entry position by 1

Menu selection mode Goes to the next item of current sub-menu

UNIT/

DATA

Weighing mode < 3 seconds Changes weighing unit of measure

Counting or

percent mode < 3 seconds Enters the submenu to input piece weight for counting

or to enter reference weight for percent-weighing

Weighing, counting

or percent mode

> 3 seconds Enters the submenu to input the comparative data

range for check-weighing

Time or date mode

> 3 seconds Enters time or date setting mode

Input data mode

Shifts the ashing data entry position from right to left

Display ADC code Select displaying code from no-lter, lter1, lter2

Menu selection mode Goes to next item of current sub-menu

TARE/

PRE-

SET

Weighing, counting

or percent mode

< 3 seconds Tare the weight

> 3 seconds Enters pre-determined tare input mode

Input data mode Conrms the input data and forwards to next step

Menu selection mode Conrms the input data and forwards to next step

ZERO/

ON-

OFF

Power Off Power On

Weighing, counting

or percent mode

< 3 seconds Zeros the platform weight

> 3 seconds Power off

Input data mode Ignores the modication

Menu selection mode Exits from current working mode

5. Controls and functions

5.2Displaycharacterdenitions

5. Controls and functions

Table des matières

Autres manuels Soehnle Échelle

Soehnle

Soehnle 9221 Manuel utilisateur

Soehnle

Soehnle Culina pro Manuel utilisateur

Soehnle

Soehnle 63354 Deluxe Manuel utilisateur

Soehnle

Soehnle 7755 Manuel utilisateur

Soehnle

Soehnle KWD Page Comfort 100 Manuel utilisateur

Soehnle

Soehnle SILVER SENSE Manuel utilisateur

Soehnle

Soehnle Professional 8320 Manuel utilisateur

Soehnle

Soehnle Food Control Easy Manuel utilisateur

Soehnle

Soehnle Body Balance Milano Manuel utilisateur

Soehnle

Soehnle Style Sense Safe 200 Manuel utilisateur

Soehnle

Soehnle Body Balance Shape F3 Manuel utilisateur

Soehnle

Soehnle Body Balance Comfort F5 Manuel utilisateur

Soehnle

Soehnle Shape Sense Connect 100 Manuel utilisateur

Soehnle

Soehnle 3700 BASIC Manuel utilisateur

Soehnle

Soehnle 7700 Manuel utilisateur

Soehnle

Soehnle Solar Fit Manuel utilisateur

Soehnle

Soehnle 9115 Manuel utilisateur

Soehnle

Soehnle Body Balance Slim F5 Manuel utilisateur

Soehnle

Soehnle Body Balance Slim F5 Manuel utilisateur

Soehnle

Soehnle Cosy Manuel utilisateur

Soehnle

Soehnle 65850 RETRO Manuel utilisateur

Soehnle

Soehnle 9202 Manuel utilisateur

Soehnle

Soehnle 9320 Manuel utilisateur

Soehnle

Soehnle 3020 Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur