Socomec DELPHYS MX Manuel utilisateur

DELPHYS MX

From 250 to 900 kVA

115

DELPHYS MX ELITE

250-900 kVA

1. ARCHITECTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

1.1. Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

2. FLEXIBILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

2.1. Power ratings from 250 to 900 kVA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

2.2. Flexible backup time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

2.3. Parallel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

3. ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

3.1. Communication interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

3.2. Hardware Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

4. INSTALLATION REQUIREMENTS AND PROTECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . 121

5. SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

5.1. Delphys MX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

5.1.1. Installation parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

5.1.2. Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

5.1.3. Recommended protection devices . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

6. REFERENCE STANDARDS AND DIRECTIVES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

6.1. Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

6.2. Standards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

6.2.1. Electromagnetic compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

6.2.2. Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

6.2.3. Type and performances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

6.3. System and installation guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

INDEX

116116

PURPOSE

The aim of these specifications is to provide:

• the information required to choose the right uninterruptible power supply for a specific application.

• the information required to prepare the system and installation site.

The specifications are intended for:

• installation engineers.

• design engineers.

• engineering consultants.

117

DELPHYS MX ELITE

250-900 kVA

1.1. Range

Delphys MX integrates the latest and most powerful generation of Insulate Gate Bipolar Transistors (IGBTs). The use of microproces-

sors increases the number of functions for more secure operation.

The implementation of cutting-edge technology such as Surface Mounted Technology (SMT) has reduced the number and size of

the circuit boards. This reduction in the number of components enhances the reliability of Delphys MX by increasing its resistance

to electromagnetic disturbances.

Models

250 300 400 500 800 900

Delphys MX 3/3 • • • • • •

Matrix table for model and kVA power rating

Delphys MX has been specifically designed to meet the demands of loads in specific application contexts, in order to optimise the

features of the product and to facilitate its integration within the system.

1. ARCHITECTURE

118

2. FLEXIBILITY

2.1. Power ratings from 250 to 900 kVA

The equipment has been designed with a minimum direct and indirect footprint (the actual space occupied by the unit and the space

required around it for maintenance, ventilation and access to the operating mechanisms and communication devices). The careful

design also provides easy access for maintenance and installation.

All of the control mechanisms and communication interfaces are located in the upper front part and can be accessed from the door.

The air inlet is on the front, with outflow to the rear only; this means other equipment or external battery enclosures can be placed

alongside the UPS unit.

Dimensions

Cabinet type Width (W) Depth (D) Height (H)

Delphys MX 250-500 kVA [mm] 1600 950 1930

Delphys MX 800-900 kVA [mm] 3200 950 2210

1600

1930

950

3200

2210

950

DELPHYS MX 250-500 kVA DELPHYS MX 800-900 kVA

119

DELPHYS MX ELITE

250-900 kVA

FLEXIBILITY

2.2. Flexible backup time

Selection of the back-up time is flexible thanks to the wide range of DC bus voltages. The batteries are organised internally into

racks based on their relative sizes, so as to ensure a compact unit while still guaranteeing substantial backup times. To guarantee

maximum back-up time availability and battery life, the Delphys MX includes Expert Battery System (EBS), smart battery charging

management and BHC Universal (Battery Health Check) to optimise the battery lifetime (available on request).

2.3. Parallel

Delphys MX consists of modular UPS units (rectifier, battery, inverter and bypass) connected in parallel (up to 6 UPS units). This

solution, which is ideally suited for 1+1 redundancy, offers flexible power upgrading and enables stand-alone UPS units to be expan-

ded, even if this was not planned in the original design of the system.

Each UPS unit has a built-in maintenance bypass.

It is possible to add an external maintenance bypass, common to all of the UPS units, for maintenance access.

Stand-alone UPS Parallel UPS

120

3.1. Communication interfaces

Delphys MX can manage various different serial, contact and Ethernet communication channels at the same time:

The various cards and signalling accessories can be housed in the communication slots mounted as standard on all models. This

provides Delphys MX UPS systems with a highly flexible interface for the purposes of integration at a later stage after installation,

also in terms of hot switching and with no need for specialist personnel.

Models

40x8 LCD display

GTS graphic display

1-7 slots

UniVision Pro and JNC

T.Service

EMD combined with

NetVision

Remote mimic panel

Serial 232/485

Dry contact card

Second serial 232

ADC

Modem

NetVision card

and JNC

Delphys MX ●○●●○○○○○○○○

• Standard

◦Option

- Not available

For a description of the options, see glossary

3.2. Hardware Equipment

Models

Separate mains

Built-in manual

bypass

External manual

bypass

Input/output

Transformer

Insulation monito-

ring device

Battery charger

Auxiliary battery

charger

Back feed control

system

Integrated Back

feed protection

IP52

BHC

Redundant power

supply

ACS

Parallel kit

Delphys MX ●●○○○●○●○○○○○○

• Standard

◦Option

- Not available

For a description of the options, see glossary

3. ACCESSORIES

121

DELPHYS MX ELITE

250-900 kVA

Connection to the mains power supply and to the load(s) must be made using cables of suitable size, in accordance with current

standards. If not already present, an electrical control station which can isolate the network upstream of the UPS must be installed.

This electrical control station must be equipped with a circuit breaker (or two, if there is a separate bypass line) of an appropriate

rating for the power draw at full load, and a residual current circuit breaker.

Current flowing to earth varies depending on the size of the UPS, therefore installation engineers must install a residential current

circuit breaker of an appropriate rating upstream of the UPS using a selective model (not sensitive to transitory currents).

Potential dispersion of current from utilities downstream of the UPS should be added to that discharged from the UPS, and it should

also be noted that current peaks are also reached, albeit very briefly, during transitory phases. It is recommended to isolate the

residual current circuit breaker by adding 30mA protection downstream of the UPS on power lines to utilities.

We also recommend checking first for any earth leakage current with an uninterruptible power supply installed and running at the

final load to prevent any untimely tripping of the breakers.

If an external manual bypass is required, only the model supplied by the manufacturer must be installed.

See the relevant table for the data on the cable size and safety devices required.

For detailed information, see the installation and operating manual.

4. INSTALLATION REQUIREMENTS AND PROTECTION

122

5.1. Delphys MX

5.1.1. Installation parameters

Installation paramenters

Model MX 250 MX 300 MX 400 MX 500 MX 800 MX 900

Phase in/out 3/3 3/3 3/3 3/3 3/3 3/3

Rated power (kVA) 250 300 400 500 800 900

Active power (kW) 225 270 360 450 720 800

Rated/maximum rectifier input current

(EN 62040-3) (A) 550 / 605 633 / 690 822 / 880 864 / 950 1273/1547 1428/1611

Rated/maximum bypass input current

(EN 62040-3) (A) 362 433 580 722 1155 1300

Inverter output current @230V (A) P/N 361 433 577 722 1155 1300

Maximum air flow (m3/h) 6140 14600

Sound level (dBA) 70 70 70 72 76

Dissipation at rated load

(minimum mains power present

and batteries charging)

W 17200 20630 27300 34000 48000 53000

kcal/h 14800 17730 23250 29260 41310 45610

BTU/h 58730 70357 92262 116111 163928 180992

Dimensions

(with standard back-up time)

W (mm)

1600 3200

D (mm)

950 995

H (mm)

1930 2210

Weight (kg) 2300 2650 3000 5900

5.1.2. Electrical characteristics

Electrical characteristics - Input

Model MX 250 MX 300 MX 400 MX 500 MX 800 MX 900

Phase in/out 3/3 3/3 3/3 3/3 3/3 3/3

Rated mains supply voltage 380/400/415 V

Voltage tolerance

(ensuring battery recharge) 340 to 460 V 360 to 460 V

Rated frequency 50/60 Hz

Frequency tolerance ± 5%

Power factor

(input at full load and rated voltage) 0.93 0.94

Total harmonic distortion (THDi) < 4.5% < 5%

Max inrush current at start-up <In (no overcurrent)

Soft start 50 A/sec (settable)

5. SPECIFICATIONS

Autres manuels pour DELPHYS MX

Table des matières

Autres manuels socomec UPS

socomec

socomec Green Power 2.0 Manuel utilisateur

socomec

socomec netis rt Manuel utilisateur

socomec

socomec MASTERYS BC+ 10 kVA Manuel utilisateur

socomec

socomec Masterys BC Manuel utilisateur

socomec

socomec DELPHYS MX 250 Manuel utilisateur

socomec

socomec MASTERYS GP4 Series Manuel utilisateur

socomec

socomec DIRIS Digiware 2018 Manuel utilisateur

socomec

socomec Green Power 2.0 10 Manuel utilisateur

socomec

socomec NeTYS PE 1000 VA Manuel utilisateur

socomec

socomec NETYS PE Manuel utilisateur

socomec

socomec MASTERYS BC 15 Manuel utilisateur

socomec

socomec MODULYS GP 25 kVA Manuel utilisateur

socomec

socomec NRT2-U1100 Manuel utilisateur

socomec

socomec Masterys Green Power Manuel utilisateur

socomec

socomec Thiele MASTERYS BC+ 80 kVA Manuel utilisateur

socomec

socomec NETYS PR-RT Series Manuel utilisateur

socomec

socomec Green Power 2.0 600 kVA Manuel utilisateur

socomec

socomec MASTERYS GP4 Series Manuel utilisateur

socomec

socomec Green Power 2.0 Manuel utilisateur

socomec

socomec Masterys BC Manuel utilisateur

socomec

socomec NETYS RT Manuel utilisateur

socomec

socomec NETYS RT 5000 Manuel utilisateur

socomec

socomec MASTERYS IP+ 60 Manuel utilisateur

socomec

socomec NETYS RT Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur

socomec DELPHYS MX Manuel utilisateur

Manuels UPS populaires d'autres marques