socomec COUNTIS E13 Manuel utilisateur
COUNTIS E13/E14
Single-phase active energy meter
80 A direct MODBUS
Operating instructions EN
2COUNTIS E13/E14 - Ref.: 542 101 A
Contents
1. DOCUMENTATION ...................................................................3
2. DANGER AND WARNING............................................................3
2.1. RISK OF ELECTROCUTION, BURNS OR EXPLOSION ..................................3
2.2. RISK OF DAMAGING DEVICE ........................................................3
3. PRELIMINARY OPERATIONS........................................................3
4. OVERVIEW ...........................................................................4
4.1. MAIN FUNCTIONS ..................................................................4
4.2. DISPLAY VIEWS ....................................................................4
5. INSTALLATION .......................................................................5
5.1. RECOMMENDATIONS...............................................................5
5.2. DIMENSIONS.......................................................................5
5.3. TERMINALS ........................................................................5
5.4. CONNECTIONS.....................................................................6
5.4.1. 2-WIRE CONNECTION - 1-WIRE LOAD MONITORING .............................6
5.5. SEALABLE COVERS ................................................................6
6. MODBUS COMMUNICATION........................................................7
6.1. GENERAL POINTS ..................................................................7
6.2. RECOMMENDATIONS...............................................................7
6.3. COMMUNICATION STRUCTURE .....................................................7
6.4. COMMUNICATION TABLE ...........................................................7
7. PROGRAMMING .....................................................................8
7.1. NAVIGATION PRINCIPLE ............................................................8
7.2. PROGRAMMING MENU OVERVIEW ..................................................8
7.3. DETAILED VIEW OF MODBUS PROGRAMMING MENU.................................9
8. OPERATION ..........................................................................10
8.1. DETAILED VIEW OF MENUS .........................................................11
9. DIAGNOSTIC MESSAGE.............................................................12
10. ASSISTANCE........................................................................12
11. TECHNICAL/ELECTRICAL CHARACTERISTICS ..................................13
12. MID COMPLIANCE .................................................................14
3
COUNTIS E13/E14 - Ref.: 542 101 A
COUNTIS E13/E14 MODBUS
1. Documentation
All the documentation for COUNTIS E13/E14 equipment is available
online at:
www.socomec.com/en/countis-e1x
2. Danger and warning
This equipment must only be installed by professionals.
The manufacturer shall not be held responsible for failure to comply with the instructions in this manual.
2.1. Risk of electrocution, burns or explosion
• Thedevicemustbeinstalledandservicedonlybyqualiedpersonnel.
• Alwaysuseanappropriatevoltagedetectiondevicetoconrmtheabsenceofvoltage.
• Replace all devices, doors, and covers before turning on power to this equipment.
• Always supply the device with the correct rated voltage.
Failure to take these precautions could cause serious injuries.
2.2. Risk of damaging device
Check the following:
• the mains frequency (50 Hz).
• the maximum voltage at the voltage input terminals is 276 VAC phase/neutral.
• a maximum current of 80 A.
3. Preliminary operations
For personnel and product safety, please carefully read the contents of these operating instructions before installation.
Check the following points as soon as you receive package containing the COUNTIS E13/E14:
• the packaging is in good condition,
• the product has not been damaged during transportation,
• the product reference number conforms to your order,
• the packaging contains the product, two sealable covers, two plastic seals and a Quick Start guide.
4COUNTIS E13/E14 - Ref.: 542 101 A
4. Overview
COUNTIS E13 and E14 are active modular electrical energy meters for monitoring kWh. They are designed for single-
phase networks and enable direct connection up to 80A. They are equipped with a MODBUS communication bus.
4.1. Main functions
• Measurement and display:
- active and reactive energy (T1 and T2): Ea+/Ea-/Er+/Er-
- of active and reactive power: P1+/P1-/Q1+/Q1-
• Management of two tariffs: T1/T2
• Measurement of electrical parameters accessible via the communication
- Voltage P-N: V1
- Current: I1
- Active power: P1+/P1-
- Reactive power: Q1+/Q1-
- Apparent power: S1
- Power factor: PF1+/PF1-
- Total active energy: Ea+/Ea-
- Total positive reactive energy: Er+
- Positive active energy per tariff: Ea+
- Positive reactive energy per tariff: Er+
• MODBUS communication
• MID version (according to reference)
Description Reference
COUNTIS E13 4850 3031
COUNTIS E14 (MID) 4850 3032
4.2. Display views
COUNTIS E13: ref. 4850 3031 COUNTIS E14 (MID): ref. 4850 3032
8-digit LCD display
Display of kWh/kvarh
Active and reactive energy imported ->/exported <-
Current tariff
Inductive/reactive power display
Capacitive/reactive power display
Current display (80A on start-up)
Consumption bargraph
(% Pmax)
Metrological LED
Selection/settings button
Selection/settings button
OK button
5
COUNTIS E13/E14 - Ref.: 542 101 A
COUNTIS E13/E14 MODBUS
5. Installation
5.1. Recommendations
• avoid proximity to systems which generate electromagnetic interference,
• avoid vibrations with accelerations in excess of 1 G for frequencies below 50 Hz.
5.2. Dimensions (mm)
64
45
6
90
44
L1 N
L1
12346
5
54
5.3. Terminals
64
45
6
90
44
L1 N
L1
12346
5
54
0.61 in/15.5 mm
PZ2
exible or rigid
7 to 50 mm2
2 Nm
0.35 in/9 mm
PZ2
exible 1.5 to 2.5
rigid 1 to 4 mm2
0.8 Nm
6COUNTIS E13/E14 - Ref.: 542 101 A
5.4. Connections
5.4.1. 2-wire connection - single-phase load monitoring
L1 L1 N
230 VAC fn = 50 Hz
L1 L’
N
80A
6
1543
2
230 VAC
120Ω -+NC
T1/2COM RS485
Modbus/Jbus
MODBUS
1: Activation of 120 ohm terminating resistors by
connecting terminals 1 and 2.
2: -
3: +
4: NC (not connected).
Tariff
5-6: Change of tariff only for COUNTISE14:
0VAC -> Tariff 1
230VAC -> Tariff 2
(change of tariff via MODBUS for COUNTISE13).
Mains
L1:Phase input.
L1: Phase output.
N: Neutral connection.
5.5. Sealable covers
COUNTIS E14 MID
Label scaled
between front and
rear faces
Plastic seal
Terminal covers
7
COUNTIS E13/E14 - Ref.: 542 101 A
COUNTIS E13/E14 MODBUS
6. MODBUS communication
6.1. General Information
MODBUS®communication is performed via a RS485 serial port (2- or 3-wire) which enables products to be used
from a PC or an API.
Onastandardconguration,aRS485portcanbeusedtoconnect32productstoaPCoraPLCacross1200
meters.
R=120Ω
R=120Ω
R=120Ω
R=120Ω R=120Ω R=120Ω
R=120Ω
R=120Ω
R=120Ω
R=120Ω R=120Ω R=120Ω
MODBUS wiring
Wiring with repeater
≈1200mor32UL
≈1200mor32UL ≈1200mor32UL
Repeater
0 -> NC
0 -> NC
6.2. Recommendations
It is necessary to use a shielded twisted pair (LIYCY type). In an environment where there is interference or large
network (in terms of length) we recommend the use of a shielded twisted pair (type LIYCY-CY).
A repeater should be used to connect additional products if the distance of 1200 m and/or maximum number of 32
products is exceeded.
A120-ohmresistormustbexedatbothendsofthelink.
6.3. Communication structure
The product communicates via a MODBUS®protocol, which involves a dialogue using a master-slave structure. The
mode of communication is the RTU (Remote Terminal Unit) mode using hexadecimal characters of at least 8 bits.
MODBUS®frame structure(master -> slave exchange):
Slave address Function code Address Number of words to read CRC 16
1 byte 1 byte 2 bytes 2 bytes 2 bytes
6.4. Communication table
The communication tables and associated explanations are
available on the COUNTIS E13/E14 documentation page online at
the following address:
www.socomec.com/en/countis-e1x
8COUNTIS E13/E14 - Ref.: 542 101 A
7. Programming
7.1. Navigation principle
Theprogrammingmodeenablesthecommunicationparameterstobemodied.Theprocesstonavigateinsidethe
programming mode is described in the following steps:
Access to item to set
> 4 sec
Enter programming mode
(press button for 4 seconds)
Value to be modified
> 4 sec Validate the value
7.2. Programming menu overview
By pressing for 4 seconds, the device will enter the programming mode.
The various screens are accessible according to the sequence:
Programming mode
Address
Communication speed
9
COUNTIS E13/E14 - Ref.: 542 101 A
COUNTIS E13/E14 MODBUS
7.3. Detailed view of MODBUS programming menu
x 10
Address
4
sec
4
sec
x 1
Communication speed
4
sec
4
sec
x 1
10 COUNTIS E13/E14 - Ref.: 542 101 A
8. Operation
The total and partial active energy values are accessible via the dedicated buttons. Pressing the appropriate button
several times displays all the available measurements. All the available information and measurements are described
in the following diagram:
Tariff T1
Ea+ (kWh)/P+ (kW)
______________
Tariff T1
Ea- (kWh)/P- (kW)
______________
Tariff T1
Er+ (kvarh)/Q+ (kvar)
______________
Tariff T1
Er- (kvarh)/Q- (kvar)
______________
Tariff T2
Ea+ (kWh)/P+ (kW)
______________
Tariff T2
Ea- (kWh)/P- (kW)
______________
Tariff T2
Er+ (kvarh)/Q+ (kvar)
______________
Tariff T2
Er- (kvarh)/Q- (kvar)
______________
MODBUS address
______________
Communication speed
Note : P (kW) and Q (kvar) power values are only displayed for the current tariff.
Autres manuels pour COUNTIS E13
2
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels socomec Instrument de mesure
socomec
socomec DIRIS A40 Manuel utilisateur
socomec
socomec COUNTIS E25 Manuel utilisateur
socomec
socomec COUNTIS E11 Manuel utilisateur
socomec
socomec DIRIS A20 Manuel utilisateur
socomec
socomec COUNTIS E13 Manuel utilisateur
socomec
socomec COUNTIS E45 Manuel utilisateur
socomec
socomec DIRIS A40 Manuel utilisateur
socomec
socomec DIRIS A20 Manuel utilisateur
socomec
socomec ISOM K-20 Manuel utilisateur
socomec
socomec COUNTIS E23 Manuel utilisateur
socomec
socomec DIRIS A10 Manuel utilisateur
socomec
socomec DIRIS A40 Manuel utilisateur
socomec
socomec DIRIS A40 Manuel utilisateur
socomec
socomec COUNTIS E42 Manuel utilisateur
socomec
socomec DIRIS A40 Manuel utilisateur
socomec
socomec COUNTIS E00 Manuel utilisateur
socomec
socomec COUNTIS E41 Instructions d'installation
socomec
socomec DIRIS A20 Manuel utilisateur
socomec
socomec COUNTIS ATd Manuel utilisateur
socomec
socomec DIRIS A20 Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur