SOARNEX EP100 Series Manuel utilisateur
PoE/PoE+非管理型以太网交換机
EP100 系列
快速安裝指南
EP100-05-31
EP100-08-31
EP100-08-62
Rev. 1.0 Aug. 2017
中
打開包裝盒, 你的包裝內含有這些:
1. EP100 系列非管理型以太网交換机 x 1
2. 直流電源适配器:
(48V DC, 0.8A) x 1適用於EP100-05-31及EP100-08-31
(54V DC, 1.67A) x 1適用於EP100-08-62
3. 交流電源線x 1
4. 橡膠腳墊x 4
5. 快速安裝指南
注意事項:
● 請在一个溫度和濕度均适宜的環境下安裝交換机。
● 電源線引出口要在离開交換机1.82 米（6 英尺)以內。
● 确保交換机周邊有一定的熱量耗散空間以及一定的通風
空間。
● 不要在交換机上放置重物。
● 請在公司网站http://www.soarnex.com上查看更多的
技述說明資料。
包裝清單
中 中
指示燈
LED
EP100-08-31
LED指示燈 顏色 狀態 描述
Power 綠色 恒亮 電源開啟
燈滅 燈滅 系統未通電
Max
(Power Max)
紅色 恒亮 PoE可用功率小于7W
燈滅 燈滅 PoE工作正常
L/A
(Link/Act)
綠色 恒亮 10/100Mbps 以太网接口鏈路已建立
閃爍 10/100Mbps 以太网接口有數據收發
燈滅 燈滅 以太网端口無連接
PoE
(Ports1-4)
綠色
恒亮 已連接PoE受電設備(PD)，并且端口已
正常供電。
閃爍 表示下列故障之一導致該端口出錯：
過大或過低電壓，過大或者過低電流。
燈滅 燈滅 未連接PoE受電設備
交換机的LED 指示燈位于前面板上.
中
EP100-05-31
EP100-08-62
LED指示燈 顏色 狀態 描述
Power 綠色 恒亮 電源開啟
燈滅 燈滅 系統未通電
Max
(Power Max)
紅色 恒亮 PoE可用功率小于7W
閃爍 當PoE輸出功率超過總預算時
燈滅 燈滅 PoE工作正常
L/A
(Link/Act)
橙色 恒亮 10/100Mbps 以太网接口鏈路已建立
閃爍 10/100Mbps 以太网接口有數據收發
綠色 恒亮 1000Mbps 以太网接口鏈路已建立
閃爍 1000Mbps 以太网接口有數據收發
燈滅 燈滅 以太网端口無連接
PoE
(Ports1-4)
綠色
恒亮 已連接PoE受電設備(PD)，并且端口已
正常供電。
閃爍 表示下列故障之一導致該端口出錯：過
大或過低電壓，過大或者過低電流。
燈滅 燈滅 未連接PoE受電設備
LED指示燈
交換机的LED 指示燈位于前面板上.
中 中
1. 將橡膠腳墊黏貼在交換机背面的凹處。
2. 將交換机放置在平桌面或者架子上。
3. 插上電源線。
4. 在交換机和周邊物体之間保持足夠的通風空間。
硬件安裝
EP100-05-31
EP100-08-31
EP100-08-62
PoE/PoE+ Unmanaged Switches
EP100 Series
EP100-05-31
EP100-08-31
EP100-08-62
Rev. 1.0 Aug. 2017
Quick Installation Guide
EN
Contents of Packing
Open the shipping carton and carefully unpack its
contents. The carton should contain the following items.
1. EP100 series Unmanaged Switch x 1
2. DC Power adapter (w/ AC power cord):
Power adapter (AC input: 100-240V/1.2A, 50/60Hz, DC
output: 48V/0.8A) x1 for EP100-05-31 and EP100-08-31
Power adapter (AC input: 100-240V/1.2A, 50/60Hz, DC
output: 54V/1.67A) x1 for EP100-08-62
3. Rubber Footpads x 4
4. Quick Installation Guide
♦Install the Switch in a suitable temperature / humidity
environment.
♦ The power outlet should be within 1.82 meters (6 feet) of
the Switch.
♦ Visually inspect the power cord to make sure that it’s
secured fully to AC Power.
♦ Make sure that there is proper heat dissipation and
adequate ventilation around the Switch.
♦ Do not place any heavy objects on the Switch.
♦ Users can check for more technical specications at
http://www.soarnex.com
!NOTE:
EN
LED Indicators
EP100-08-31
LED Indicator Color Status Description
Power Green Green solid Power on
Off Light off Power o
Max
(Power Max)
Red Red
solid
When the total PoE output
power achieve Guard Band
Off Light o System still have spare
power for new PD
L/A
Link/Act
Amber
Amber
solid
When there is a secure
connection (or link) to
10/100Mbps Ethernet
device at any of the ports
Amber
blinking
When there is reception or
transmission of data
occurring at 10/100Mbps
Off Light off No link
PoE
(Ports1-4)
Green
Green solid Power feeding
Green
blinking Error condition
Off Light off No power feeding
The LEDs of the Switch are located on the front panel.
ENEN
EP100-05-31
EP100-08-62
LED Indicators
LED Indicator Color Status Description
Power Green Green solid Power on
Off Light off Power o
Max
(Power Max)
Red
Red
solid
When the total PoE output
power achieve Guard Band
Red
blinking
When PoE output power is
over total budget
Off Light off System still have spare
power for new PD
L/A
(Link/Act) Amber
Amber
solid
When there is a secure
connection (or link) to
10/100Mbps Ethernet
device at any of the ports
Amber
blinking
When there is reception or
transmission of data
occuring at 10/100 Mbps
The LEDs of the Switch are located on the front panel.
EN
LED Indicator Color Status Description
L/A
(Link/Act)
Green
Green
solid
When there is a secure
connection (or link) to
1000Mbps Ethernet
device at any of the ports.
Green
blinking
When there is reception or
transmission of data
occurring at 1000Mbps
Off Light off No link
PoE
(Ports1-4)
Green
Green solid Power feeding
Green
blinking Error condition
Off Light off No power feeding
Hardware Installation
1. Attach the rubber footpads to the recessed areas on
the bottom of the Switch.
2. Place the Switch on a flat desk or shelf.
3. Connect to DC power adapter.
4. Keep enough ventilation space between the Switch
and surrounding objects.
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels SOARNEX Changer
