Snom 320 Manuel utilisateur

Snom320 User's ManualVer2.0.2 november 07 2017

Ver2.0.1 november 10 2016

Thank you or purchasing Snom320.

Make sure and acknowledge that you have read this manual be ore using Snom320.

Package Contents:

1.Main Case

2.Handset

3.Handset Cable

4.AC Power Adaptor

5.Quick Start Guide manual

Disclaimer

* This document is subject to change without prior notice.

* A possibility o noise, broken voice, or disconnection may occur because o customers’ or our network environment.

We cannot guarantee the quality o voice.

* The company assumes no responsibility on the di erence o call or voice quality when the hearing acuity o

individuals is concern.

* The company assumes no responsibility when it was used outside Japan.

* As or SNOM320 regular server maintenance, you may experience temporarily service stops without prior notice.

* The company assumes no responsibility when the customers caused the phone primary source o mal unction or

breakdown.

Maintenance/Cleaning

Please use so t dry clothes to clean the device.

Don’t use wet clothes.

Don’t use volatile chemical like benzene, or thinner since they can damage the device.

I you want to use a chemical wipe, please read the cautionary notes be ore using it.

Connection Method:

1. Connect the handset cord in the handset and connect it on the main body.

2. Plug the Ethernet (network) cable into the RJ 45 connector labeled “NET” and plug the other end into the network

side to establish a data link.

3. The second RJ45 connector, labeled “PC”, is or daisy-chaining urther Ethernet devices without the need or a

second Ethernet connection line.

4. Insert the plug o the power supply into the connector labeled “DC 5V” and hooks up the casing into the mains.

5. I you want to use a headset, connect it to the RJ audio jack on the bottom shell o the phone.

SNOM320

SNOM320 is a phone device that can be used with our service. It cannot be used as a typical phone. The customer

must subscribe to an Internet Service Provider to be able to use the device. Customer with no broadband router

eature must provide a separate broadband router.

Keypad Familiarization

1. Navigation key – or navigation within the display menu and the phone book.

2. Enter key – to con irm actions, selections and inputs.

*Always press the “ENTER Key” a ter inputting the numbers dialed

3. Cancel Key – to cancel actions or inputs.

4. LED or MWI - (Message Waiting Indicator)

5. Volume Key – key to adjust the volume to (lower/higher)

6. Speaker - turns the speaker on/o

7. The 12 keys on the right with LEDs next to them are the programmable unction keys onto which di erent

unctionalities can be mapped.

8. Hold Key – Key to Put call on hold/resume call

9. DND Key – Do not disturb key or call rejection key.

10. Help Key

Used or checking IP and MAC address o the device.

10. Help Key

Used or checking IP and MAC address o the device.

General Settings

1. Veri y device’s IP Address. Press [ elp Key] Select [Information], [IPAdr] [MAC] and [Version] will appear.

Select [IPAdr] and Press enter [Check] button.

2. Snom320 and the PC must be connected to the same network. Launch any web browser such as Internet Explorer.

Enter IP Address observing the ormat below.

http: // (IP address)

Example: I the IP address is written as 192.168.001.002 , it should be entered as http://192.168.1.2/

*A ter initializing the device that you access, you will still not be prompted to enter a username/password.

In order to prevent unauthorized login, please set username and password

I you are unsure o the password please contact our customer service representative.

3. On the [Setup] options, select [Identity 1].

Display Name and Account: Enter [Unique ID].

Password: Enter [Registered Password](sent thru mail).

* I you changed password, enter your new password.

Registrar and Outbound Proxy: Enter [

Authentication Username: Enter [Unique ID].

Display Text or Idle Screen: Enter [Extension Number].

* Click [Apply] to save changes.

*Click [Play ringer] to con irm your ringing tone. You can also listen through your device,

and make sure to check the device’s volume.

4. On the [Setup] options, select [Identity 1], then click [NAT].

Keepalive

Interval (seconds): Enter [

] seconds.

Keepalive

Interval (seconds): Enter [

] seconds.

*Click [Save] to save changes.

5. On the [Setup] options, select [Preferences].

Web Inter ace Language: Select [English].

Language: Select [English].

Number Display Style: Select [Number].

Tone Scheme: Select [Japan].

*Click [Save] to save changes

6. On the [Setup] options, select [Function Keys]

Setting Key Allocations

Menu Function keys:

HELP Number: Select [ elp]

TRANSFER Type: Select [DTMF]

TRANSFER Number: Select [#9]

*Click [Save] to save changes

7. On the [Setup] options, select [Advanced]

NTP Time Server: Enter [ntp.jst.mfeed.ad.jp].

NTP Re resh Time (sec): Enter [

3600

]

NTP Re resh Time (sec): Enter [

3600

]

Timezone: Select pre erred time zone

* Click [Save] to save changes.

Autres manuels pour 320

Table des matières

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Polycom

Polycom Polycom VVX 600 Manuel utilisateur

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Cisco

Cisco SPA-500 Series Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Cisco

Cisco 7962 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Avaya

Avaya 4625SW Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

Avaya

Avaya Integral 5 R3.0 Manuel utilisateur

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Avaya

Avaya 4600 Series Manuel de service

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur

Nortel

Nortel i2050 Manuel utilisateur