SNBC BT-UR056 Manuel du propriétaire

BT-UR056/BT-UC056II/BT-UC156

PROGRAMMING MANUAL

V1.0

SHANDONG NEW BEIYANG INFORMATION TECHNOLOGY CO.,LTD

BT-UR056/BT-UC056II/BT-UC156 Programming Manual

- 1 -

REVISION HISTORY

Date Version Description Author

August 10,2005 V1.00 Primary version Mr. Cong Xinyuan;

Mr.Yang Xiangang

BT-UR056/BT-UC056II/BT-UC156 Programming Manual

Declaration

If you need this manual, please comply with the clause below.

If you disagree with it, please return this manual immediately.

This manual contains the private confidential information belonging to Shandong New Beiyang

Information Technology Co., Ltd. (hereinafter referred to as SNBC). You must keep its relative content as

the confidential information. If the users are commercial customers or entities, you should be aware to

disclose it to those people with the confidential responsibility including your employees, agencies and

partners. When you terminate the cooperation with SNBC or SNBC puts forward a request, you have to

stop using this manual and return it to SNBC, or destroy the confidential information.

If any relative organ such as court, arbitrator or government authority requests you to disclose any

confidential information of this manual, you must inform SNBC quickly and also agree that you shall

cooperate or assist with SNBC reasonably during the negotiation.

SNBC has the right to disclose its confidential information and is not responsible for the loss or damages

caused from the wrong usage or reference of this manual by users.

Information in this document is subject to change without notice, which is only used for product

maintenance or service relative to this manual. SNBC reserves the right to modify the manual. If users

need further data about the products, please feel free to contact SNBC or your local dealer.

No part of this document may be reproduced or transmitted in any form or by any means, electronic or

mechanical, for any purpose without the express written permission of SNBC.

Printed in China

Version 1.0

Technical Contact Information

In CHINA:

Address: 126 Kunlun Road, Huancui District, Weihai, Shandong, China

Hot line: 0086-631-5785998

Fax: 0086-631-5785995

P. C.: 264203

Http: // www.newbeiyang.com

E-mail: [email protected]

- 2 -

BT-UR056/BT-UC056II/BT-UC156 Programming Manual

- 3 -

Content

1 General Information...........................................................................................................................- 6 -

1.1 Key Terms .............................................................................................................................. - 6 -

1.2 Command Format .................................................................................................................. - 6 -

2 Command set ....................................................................................................................................- 7 -

HT ................................................................................................................................................ - 7 -

LF................................................................................................................................................. - 7 -

FF................................................................................................................................................. - 7 -

CR................................................................................................................................................ - 8 -

CAN.............................................................................................................................................. - 8 -

DLE EOT n................................................................................................................................... - 8 -

DLE ENQ n ................................................................................................................................ - 10 -

ESC FF ...................................................................................................................................... - 11 -

ESC SP n ................................................................................................................................... - 11 -

ESC ! n....................................................................................................................................... - 11 -

ESC $ nL nH .............................................................................................................................. - 12 -

ESC % n..................................................................................................................................... - 13 -

ESC & y c1 c2 [x1 d1...d(y × x1)]...[xk d1...d(y × xk)] ................................................................. - 13 -

ESC * m nL nH d1... dk .............................................................................................................. - 14 -

ESC–n........................................................................................................................................ - 16 -

ESC 2......................................................................................................................................... - 16 -

ESC 3 n...................................................................................................................................... - 16 -

ESC = n...................................................................................................................................... - 17 -

ESC ? n...................................................................................................................................... - 17 -

ESC @ ....................................................................................................................................... - 17 -

ESC D n1…nk NUL.................................................................................................................... - 18 -

ESC E n ..................................................................................................................................... - 18 -

ESC G n ..................................................................................................................................... - 19 -

ESC J n...................................................................................................................................... - 19 -

ESC L......................................................................................................................................... - 19 -

ESC M n..................................................................................................................................... - 20 -

BT-UR056/BT-UC056II/BT-UC156 Programming Manual

- 4 -

ESC R n ..................................................................................................................................... - 21 -

ESC S ........................................................................................................................................ - 21 -

ESC T n...................................................................................................................................... - 22 -

ESC V n ..................................................................................................................................... - 22 -

ESC W xL xH yL yH dxL dxH dyL dyH ....................................................................................... - 23 -

ESC \ nL nH ............................................................................................................................... - 24 -

ESC a n...................................................................................................................................... - 24 -

ESC c 0 n................................................................................................................................... - 25 -

ESC c 3 n................................................................................................................................... - 25 -

ESC c 4 n................................................................................................................................... - 26 -

ESC c 5 n................................................................................................................................... - 26 -

ESC d n...................................................................................................................................... - 26 -

ESC l n X0l X0h Y0l Y0h X1l X1h Y1l Y1h ................................................................................. - 27 -

ESC t n....................................................................................................................................... - 27 -

ESC v......................................................................................................................................... - 28 -

ESC { n....................................................................................................................................... - 28 -

FS p n m..................................................................................................................................... - 29 -

FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n ............................................................... - 30 -

GS FF......................................................................................................................................... - 31 -

GS ! n......................................................................................................................................... - 32 -

GS # n........................................................................................................................................ - 33 -

GS $ nL nH................................................................................................................................. - 33 -

GS ( A pL pH n m ....................................................................................................................... - 33 -

GS * x y d1...d(x × y × 8) ............................................................................................................ - 34 -

GS / m ........................................................................................................................................ - 35 -

GS :............................................................................................................................................ - 36 -

GS B n........................................................................................................................................ - 36 -

GS H n ....................................................................................................................................... - 36 -

GS L nL nH................................................................................................................................. - 37 -

GS W nL nH ............................................................................................................................... - 37 -

GS \ nL nH.................................................................................................................................. - 38 -

BT-UR056/BT-UC056II/BT-UC156 Programming Manual

- 5 -

GS ^ r t m ................................................................................................................................... - 38 -

GS a n........................................................................................................................................ - 39 -

GS f n......................................................................................................................................... - 41 -

GS h n........................................................................................................................................ - 41 -

①GS k m d1...dk NUL②GS k m n d1...dn ................................................................................. - 41 -

GS r n......................................................................................................................................... - 44 -

GS v 0 m xL xH yL yH d1....dk.................................................................................................... - 44 -

GS w n ....................................................................................................................................... - 45 -

FS ! n.......................................................................................................................................... - 46 -

FS & ........................................................................................................................................... - 47 -

FS - n ......................................................................................................................................... - 47 -

FS .............................................................................................................................................. - 47 -

FS S n1 n2 ................................................................................................................................. - 48 -

FS W n ....................................................................................................................................... - 48 -

3 Programming Instructions................................................................................................................- 49 -

3.1 General information.............................................................................................................. - 49 -

3.2 Commands application......................................................................................................... - 49 -

3.2.1 Initialization ................................................................................................................. - 49 -

3.2.2 Printing settings and printout (Characters/barcode/bit image)..................................... - 49 -

3.2.3 Print............................................................................................................................. - 51 -

3.2.4 Status inquiry .............................................................................................................. - 51 -

3.2.5 Download bit images................................................................................................... - 51 -

3.2.6 Recommendations on applicable flow for programm .................................................. - 54 -

APPENDIX A: Code 128 bar code .....................................................................................................- 56 -

APPENDIX B: Printing mode and it’s transition ..................................................................................- 60 -

BT-UR056/BT-UC056II/BT-UC156 Programming Manual

1 General Information

1.1 Key Terms

Real-time commands – These commands are acted on immediately upon being received by the printer.

Page mode –Under this mode, the printer possesses all data in specified memory and thinks of this as a

virtual page. The page is printed when the printer receives print command either FF or ESC FF;

Standard mode –Standard mode is the default mode of printer, namely line mode. Under this mode, the

printer prints data and feeds paper upon print line buffer full (data is enough for one print line) or

receiving print command like LF;

HRI character – Human Readable Interface;

NV memory– Non-volatile memory in which data stored does not loss when power off.

RAM –Random Access Memory

Motion unit –The motion unit has vertical motion unit and horizontal motion unit, which specify the least

space for vertical motion and horizontal motion.

ASB – Auto status back.

DPI –Print dots per inch (one inch equals to 25.4mm). It is used to identify the resolution of a printer.

Example, 203DPI means 203 print dots per inch. DPI: Dot Per Inch.

1.2 Command Format

1) [Name] The name and function summary.

2) [Format] The command format is expressed in ASCII, Hex and Decimal separately.

3) [Range] The range of variation value is selected for a command.

4) [Default] After initialization of printer with power on, primary value is used in commands.

5) [Description] The detailed functions of command.

6) [Note] Lists items shall be given about attention and main features in use.

7) [Reference] Lists all other commands related to current command.

---> DLE EOT n

---> [Name] Real-time status transmission

---> [Format] ASCII DLE EOT n

Hex 10 04 n

Decimal 16 4 n

---> [Range] 1 ≤n ≤4

---> [Description] Transmits the printer status specified by ‘n’ in real-time.

---> [Note] The printer will return relevant status immediately after receiving this command.

- 6 -

BT-UR056/BT-UC056II/BT-UC156 Programming Manual

- 7 -

2 Command set

[Name] Horizontal tab

[Format] ASCII HT

Hex 09

Decimal 9

[Description] Moves the print position to the next horizontal tab position.

[Notes] • This command is ignored unless the next horizontal tab position has been set.

• If the next horizontal tab position exceeds the printing area, the printer sets the printing

position to [Printing area width + 1].

• Horizontal tab positions are set with ESC D.

• If this command is received when the printing position is at [printing area width+ 1], the

printer executes print buffer-full printing of the current line and horizontal tab processing

from the beginning of the next line.

• The default setting of the horizontal tab position for the paper roll is font 0 (12×24) every

8th character.

• When the buffer of the line is full, the printer executes as follows:

In standard mode, the printer print the data of current line and set the printing position at

the beginning of next line.

In page mode, the printer shifts newline and sets the printing position at the beginning of

next line.

[Reference] ESC D

[Name] Print and feed a line.

[Format] ASCII LF

Hex 0A

Decimal 10

[Description] In standard mode, it prints the data in the print buffers and feeds one line based on the

current line spacing.

[Note] This command sets the print position at the beginning of the line.

In page mode, the printer shift newline and set the position at the beginning of Next line.

But it doesn’t execute the print.

[Reference] ESC 2, ESC 3

[Name] Print and feed paper

[Format] ASCII FF

Hex 0C

Decimal 12

[Description] (1) If the paper is continuous type;

* In page mode print all data in buffers and return to standard mode;

* In standard mode this command is same as LF;

BT-UR056/BT-UC056II/BT-UC156 Programming Manual

- 8 -

* The print area set by ESC W is recovered to the default;

(2) If the paper is marked type:

* In page mode prints all data in the print buffers, then it shall not return to standard mode

and not clear the data in the buffers. After the printing, the printer feeds the next label to

printing position. The coordinates in current print buffers are not changed.

* In standard mode this command equals to GS FF when executing mark orientation.

[Notes] This command sets the print position at the beginning of the line.

[Reference] ESC FF, ESC L, ESC S, GS (F, GS FF

[Name] Print and carriage return

[Format] ASCII CR

Hex 0D

Decimal 13

[Description] When automatic line feed is enabled, this command functions the same as LF; when

automatic line feed is disabled, this command is ignored.

[Notes] Set the print starting position at the beginning of the lines.

This command CR is set according to the printer configuration.

[Reference] LF

CAN

[Name] Cancel print data in page mode

[Format] ASCII CAN

Hex 18

Decimal 24

[Description] In page mode, deletes all print data in current print buffers.

[Notes] This command is enabled only in page mode.

· If data that existed in the previously specified printing area also exists in the currently

specified printing area, it is deleted.

[Reference] ESC L, ESC W

DLE EOT n

[Name] Real-time status transmission

[Format] ASCII DLE EOT n

Hex 10 04 n

Decimal 16 4 n

[Range] 1 ≤n ≤4

[Description] Transmits the printer status specified by n in real-time, according to the following

parameters:

n = 1: Transmit off-line/on-line status

n = 2: Transmit printer status

n = 3: Transmit printer status

n = 4: Transmit paper sensor status

[Notes] · The status is transmitted whenever the command is received.

BT-UR056/BT-UC056II/BT-UC156 Programming Manual

- 9 -

· This command should not be used within the data sequence of another command that

consists of 2 or more bytes.

· Even though the printer is not selected with ESC = (select peripheral device), this

command is effective.

· The printer transmits the current status. Each status is represented by one-byte data.

· The printer transmits the status without confirming whether the host computer can receive

data.

· The printer executes this command upon receiving it.

· The command is enabled only for serial interface printer. In any status the printer

executes this command upon receiving it.

n = 1: Printer on-line/off-line status

Bit 0/1 Hex Decimal Function

0 0 00 0 Fixed to 0

1 1 02 2 Fixed to 0

2 0 00 0 Fixed to 0

3 0 00 0 On-line

1 08 8 Off-line

4 1 10 16 Fixed to 0

5 0 00 0 Fixed to 0

0 00 0 The state of printer is normal

6 1 40 64 The state of printer is abnormal

7 0 00 00 Fixed to 0.

n = 2: Printer status

Bit 0/1 Hex Decimal Function

0 0 00 0 Fixed to 0

1 1 02 2 Fixed to 1

0 00 0 Top cover is closed

2 1 04 4 Top cover is open

0 00 0 Without using the FEED button

3 1 08 8 Press down the FEED button

4 1 10 16 Fixed to 1

5 0 00 0 Fixed to 0

0 00 0 The printer status is normal

6 1 40 64 The state of printer is abnormal

7 0 00 0 Fixed to 0

Autres manuels pour BT-UR056

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SNBC Étiqueteuse

SNBC

SNBC BT-UR056 Manuel d'utilisation et d'entretien

SNBC

SNBC BTP-L580 Manuel utilisateur

SNBC

SNBC BTP-3200E Manuel du propriétaire

Manuels Étiqueteuse populaires d'autres marques

Brother

Brother P-Touch 2420PC Manuel utilisateur

newell

newell Dymo LabelManager 210D Manuel utilisateur

Brother

Brother TD-4000 Manuel utilisateur

U-Line

U-Line BROTHER H-8754 Manuel utilisateur

Tharo Systems

Tharo Systems H-435+ Manuel utilisateur

Brother

Brother E300 Manuel utilisateur

Godex

Godex RT700 SERIES Manuel utilisateur

ID Technology

ID Technology 252 Manuel utilisateur

Labelmate

Labelmate MC-11 Manuel utilisateur

CAB

CAB XD4M/300 Manuel utilisateur

Avery Dennison

Avery Dennison Pathfinder 6057 Manuel de service

Brother

Brother P-touch PT-9700PC Manuel utilisateur

TSC

TSC PEX1000 Series Manuel utilisateur

Adkins

Adkins Label Master Manuel utilisateur

Epson

Epson LabelWorks LW-400 Manuel utilisateur

Primera

Primera 510212 Manuel utilisateur

Brady

Brady BradyPrinter S3100 Manuel utilisateur

DuraLabel

DuraLabel LabPRO Manuel utilisateur