User Manual
p. 2
1. A standard set of Photo Booth SMOVE
FBOX MINI
Standard set contains:
Photo booth shell,
Base plate
Stand / Leg
Printer shelf
Printer shell,
Canon EOS camera with a power supply adaptor,
ALL-IN-ONE ASUS PC with a power supply adaptor,
A dye sublimation printer Mitsubishi CP-D80DW with a power supply cable,
4x M6 screws with big head to bind the Base plate with Stand,
2x M6 screws with small head to bind the Printer shell with Printer shelf
1x M6 screws with big head to bind the Photo booth shell with Stand,
1x M6 screws with big head to secure the Printer shelf,
2 sets of 2 keys,
Lamp remote control,
2x Remote control for decorative lighting
1m power supply cable IEC C13-C14 to connect Photo booth shell with Stand,
5m power supply cable IEC C13,
Mini USB cable to connect Camera to the PC,
1m USB A-B cable to connect Photo booth shell with Stand.
0,5m USB A-B cable to connect Printer shell with Stand.
Warning
The machine is not made for permanent working. The maximum operating duration
should not exceed 12h. After this period, the machine should be turned off for at least
6h. Photo Booth cannot be used and stored in an open space area.
Operating and storing range: temperature 10 –30 Celsius degrees; humidity: 35-80%
with no condensation. Once prolong transported (+1h) with a risk of temperatures
beyond the range given above (<10 - >30 O), please wait at least 1 hour before turning
it on.
The PC, as the only one part of Photo Booth set, does NOT have to be disassembled during the transport. However, we
recommend you to take a special care to prevent mechanical damage of the PC screen.
