SmokeCloak EASY 2200 Manuel utilisateur
SmokeCloak EASY 2200
INSTALLATION AND OPERATING INSTRUCTION
2 EASY 2200 user manual
Every effort has been made to ensure that the contents of this
manual are correct. MSS Professional A/S does not accept any li-
ability for loss or damage caused or alleged to be caused directly or
indirectly by this manual. The contents of the manual may be subject
to change without notice. MSS Professional A/S makes no warranty
of any kind with regards to this material.
© 2012 MSS Professional
Reproduction in any matter whatsoever without the written permis-
sion of MSS Professional A/S is strictly forbidden.
READ AND SAVE THESE
INSTRUCTIONS
MSS Professional A/S
Agerhatten 25
DK - 5220 Odense SØ
Danmark
Telefon: +45 6473 1407
www.smokecloak.com
3
EASY 2200 user manual
Manual
EASY 2200
Please read this manual carefully before attempting to install an EASY 2200.
4 EASY 2200 user manual
Conventions
The following symbols are used in this manual to help you install the
SmokeCloak system correctly and safely.
Note
Gives useful advice or suggestions to enhance the
performance of the SmokeCloak system.
Important
Indicates important information that is critical for
the correct use of your products and must always be
read carefully.
It is essential that only genuine SmokeCloak uid is
used. Damage to the equipment and possible health
hazard is likely if incorrect uid is used. The warranty
on all of the equipment will also be void.
Under no circumstances should the on board power
supplies of the SmokeCloak “12v output” be linked
to any other 3rd party equipment e.g. alarm panels,
additional power supplies, etc. as this could cause
unexpected faults within the machines.
In areas tted with equipment generating high le
vels of electrical interference, screened alarm cable
may be required to ensure correct operation of the
EASY unit.
5
Contents
Contents
1. IN THE BOX......................................................................... 6
2. QUICK START GUIDE ............................................................ 6
3. SPECIFICATIONS .................................................................. 8
4. MACHINE LAYOUT ............................................................. 10
5. INSTALLATION................................................................... 12
6. DIRECTING THE NOZZLE.................................................... 13
7. FLUID ................................................................................ 15
8. PRIMING THE MACHINE .................................................... 17
9. BATTERIES ........................................................................ 18
10. WIRING UP THE MACHINE ................................................. 21
11. INTERFACE BOARD............................................................ 22
12. CONNECTION DETAILS....................................................... 23
13. CLOAK SENSOR ................................................................. 40
14. SETTING THE ACTIVATIONS TIME ....................................... 42
15. PREPARATION FOR FINAL TEST ......................................... 44
16. MAINTENANCE.................................................................. 45
17. PC-TOOL ........................................................................... 46
18. USING THE SOFTWARE...................................................... 49
19. TIMERS............................................................................. 50
20. ACCESSORIES ................................................................... 56
Fluid FL600 ....................................................................... 56
Cloaksensor CS07A............................................................. 57
LED Strobe......................................................................... 58
Sounder IPA 117 ................................................................ 59
Voice Module...................................................................... 60
Batteries ............................................................................ 61
6 EASY 2200 user manual
1. In The Box
Before attempting to install the machine it is advisable to ensure that you
have all the required components. Upon opening your SmokeCloak EASY
box you should nd:
x1 off EASY 2200 unit
Check serial labels to ensure the correct voltage
x1 off Manual pack
Warning stickers
Mounting template
Quick start guide
CD Rom containing manual
x1 off Accessory Pack
Straight nozzle insert
30 degree nozzle insert
Circlip (x2 off)
Suppressors
x1 off Cloaksensor (CS07A)
In addition to the above items you will also need 2x 1.2 Ah 12 V batteries.
MSS Professional A/S recommends FIAMM or similar quality.
In addition, the following specialist tools will also be required:
Internal Circlip Pliers (20 mm)
2. Quick Start Guide
To quickly prepare and re your unit, the following steps should be taken.
For more detail on anything below, see the full guide provided.
7
98
Test
5
1
Max
2,5 m
Max 3 m
3
7
6
24
8 EASY 2200 user manual
3. Specications
EASY 2200
Dimensions 468 x 382 x 223 mm
Weight (install) 19.15 kg
Weight (shipped) 23 kg
Weight (hanging) 21.15 kg
Performance 764m3in 30 s*
Reaction time 0.2 s
Fluid consumption 260 ml in 30 s
Standard colour White
Mounting Vertical or Horizontal
Fluid Reservoir 1,0 L
Heat up time (Rdy) 9 minutes (230 V)
Heat up time (Full) 15 minutes 45 s (208V)
13 minutes (230V)
Timer Adjustable
Voltage 230V, 208V
Heat Power 208/230V 2 x 950 W
Power consumption at 230V (max) 2.0 KW
Power consumption at 208V (max) 1.65 KW
Standby Power consumption @ full temperature 105 W
Standby Power consumption during power save
mode 72 W
Current Draw at 230 V (max) 8.85 A
Current Draw at 208 V (max) 7.8 A
Pumps x2 24 V solidstate, variable
output
9
EASY 2200 user manual
Weight (Install)
Represents the weight of the machine, without the covers on, and without
the batteries or any uid installed.
Weight (Shipped)
Represents the weight of the machine packed within its box
Weight (Hanging)
Represents the weight of the machine, in its armed state hanging on a
wall. That includes covers, Batteries and a full container of uid.
Heat-up time (rdy)
The gure given is a time to ‘ready’ state at an ambient temperature of 20°C
Heat-up time (full)
The gure given is a time to full temperature at an ambient temperature
of 20°C
10 EASY 2200 user manual
4. Machine Layout
1. Main power PCB
2. Interface PCB
3. Tamper switch
4. Fluid bottle
5. Batteries
5. Pumps
6. Heat exchanger
7. Nozzle output
Table des matières
Autres manuels SmokeCloak Machine à brouillard
Manuels Machine à brouillard populaires d'autres marques
Antari
Antari ICE Manuel utilisateur
Boost
Boost BOOST-FOG400LED-BK Manuel utilisateur
Home Accents Holiday
Home Accents Holiday FM1000-ASH Manuel utilisateur
EuroLite
EuroLite ZEITGEIST FOG-1200 Manuel utilisateur
Dyna-Fog
Dyna-Fog CYCLONE ULTRA 2734 Manuel utilisateur
PROEL
PROEL DRAGO HEAVY PLFD150HY Manuel utilisateur
