SMC Networks JI5-RT359333DB24 Manuel utilisateur

JI5-RT359333DB24

User Manual

802.11 b/g/n Wireless Mini PCIE

SMCD3GNV5 Administrator Manual

SMC Networks

20 Mason

Irvine, CA 92618

U.S.A.

Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no

responsibility is assumed by SMC for its use, or for any infringements of patents or other rights of third parties

which may result from its use. No license is granted by implication or otherwise under any patent or patent rights

of SMC. SMC reserves the right to change specifications at any time without notice

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or stored in a database or retrieval system for any purpose

without the express written permission of SMC.

Microsoft and Windows are registered trademarks of Microsoft Corporation. Apple and Macintosh are registered

trademarks of Apple, Inc. All other brands, product names, trademarks, or service marks are property of their

respective owners.

iii

SMCD3GNV5 Administrator Manual

Compliance

Federal

Communication Commission

Interference

Statement

This equipment has been tested and found to comply with the limits for a

Class

B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are

designed to provide reasonable protection

against harmful interference in

residential installation. This equipment generates uses and can

radiate

radio

frequency energy and, if not installed and used in accordance with

the

instructions,

may cause harmful interference to radio

communications.

However, there is no guarantee that

interference will not occur in a

particular

installation. If this equipment does cause harmful

interference to radio

television reception, which can be determined by turning the equipment off

and

on, the user is encouraged to try to correct the interference by one of

the

following

measures:

- Reorient or relocate the receiving

antenna.

- Increase the separation between the equipment and

receiver.

- Connect the equipment into an outlet on a circuit different from

that

to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for

help.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the

following two

conditions: (1) This device may not cause harmful

interference,

and (2) this device must accept any

interference received,

including interference

that may cause undesired

operation.

FCC Caution: Any changes or modifications not expressly approved by

the

party responsible for

compliance could void the user's authority to operate

this equipment

SMCD3GNV5 Administrator Manual

IMPORTANT

NOTE

FCC

Radiation Exposure

ateme

This equipment complies with FCC radiation exposure limits set forth for

uncontrolled environment.

This equipment should be installed and

operated

with minimum distance 20cm between the radiator &

your

body.

This transmitter must not be co-located or operating in conjunction with any other antenna

or transmitter.

IEEE 802.11b/g/n operation of this product in the U.S.A.

firmware-limited to channels 1 through

11.

This device is

intended

only for OEM

integrators

under the

following condition

•The antenna must be installed such that 20 cm is maintained between

the

antenna and users,

and

•The transmitter module may not be co-located with any other transmitter

or antenna.

As long as the above two conditions are met, further transmitter test will not

required. However,

the OEM integrator is still responsible for testing

their

end-product for any additional compliance

requirements required with

this

module installed (for example, digital device emissions, PC

peripheral

requirements,

etc.).

IMPORTANT NOTE: In the event that these conditions can not be met

(for

example certain laptop

configurations or co-location with another

transmitter),

then the FCC authorization is no longer

considered valid and the FCC ID

can

not be used on the final product. In these circumstances, the

OEM

integrator

will be responsible for re-evaluating the end product (including the

transmitter)

and

obtaining a separate FCC

authorization.

注意

依據

低功率電波輻射性電機管理辦法

第十二條

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用

者均不得擅自

變更頻率、加大功率或變更原設計之特性及功能。

SMCD3GNV5 Administrator Manual

第十四條

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現

有干擾現象

時，應立即停用，並改善至無干擾時方得繼續使用。

前項合法通信，指依電信規定作業之無線

電信。低功率射頻電機

須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干

擾。

End Product

Labeling

This transmitter module is authorized only for use in device where the

antenna

may be installed

such that 20 cm may be maintained between the antenna

and

users. The final end product must be

labeled in a visible area with the

following:

“Contains TX FCC ID: JI5-359333DB24

”.

Manual

Information

That Must be

Included

This module must be properly installed in an approved device to function properly.Installation should

be performed only at the factory or by a qualified service technician.The module should be inserted

into the mini-PCIE connector. Once installed into the mini-PCIE card slot, carefully attach the Wi-Fi

antennas to the connectors on the card.

The OEM integrator has to be aware not to provide information to the end

user

regarding how to

install or remove this RF module in the user manual of

the

end product which integrates this

module.

The user manual for OEM integrators must include the following information

a prominent location

“IMPORTANT NOTE: To comply with FCC RF

exposure

compliance requirements, the antenna

used for this transmitter must

installed to provide a separation distance of at least 20 cm from all

persons

and

must not be co-located or operating in conjunction with any other antenna

or transmitter.

For all the model ship to USA market, OEM integrator shall limit the accessible

channel

to US

channel 1 -11 only during the manufacturing process by special firmware

setting

which is not

available to the end

user.

SMCD3GNV5 Administrator Manual

Contents

Compliance ............................................................................................................. iii

Contents.................................................................................................................. vi

About this Manual.................................................................................................... 7

1 Introduction........................................................................................................... 8

Features........................................................................................................................8

What is Wireless LAN................................................................................................... 9

Wireless LAN Modes .................................................................................................. 10

Notes on Wireless LAN

Configuration

.................................................................. 11

SMCD3GNV5 Administrator Manual

About this Manual

This User’s Manual describes how to install and operate your 802.11b/g/n

Wireless

LAN Module. Please read this manual before you install the

product.

This manual includes the

following

topics:

Product description and

features.

SMCD3GNV5 Administrator Manual

1 Introduction

The JI5-RT359333DB24, which is based on the RT35933 solution, is a dual-band mode

802.11b/g/n

wireless LAN embedded Mini-PCI module for Wireless Cable Gateway Router.

JI5-RT359333DB24 will be a RF module of AP

board.

Additionally, provide new feature to

existing Wireless Cable Gateway Router

products.

Features

Embedded to any AP with Mini-PCI type -B

slot.

•

IEEE 802.11 b/g/n

compatible.

•

Backward compatible with IEEE 802.11b

standard.

•

Wire-free access to networked resources from anywhere beyond the

desktop.

•

Delivers data rate up to 450

Mbps.

•

801.11b/g/n: Dynamically shifts between 54, 48, 36, 24, 18, 12, 9 and 6 Mbps

network

speed,

based on signal strength, for maximum availability and reliability

connection.

•

802.11b: Dynamically shifts between 11M, 5.5M, 2M, and 1 Mbps network speed,

based on

signal

strength, for maximum availability and reliability of

connection.

•

Uses 2.4GHz frequency band, which complies with worldwide

requirement

•

Ensures great security by providing the 64/128/256 Wired Equivalent Privacy (WEP)

and WPA/PWA2.

•

802.11i standards

support.

•

WMM

support.

SMCD3GNV5 Administrator Manual

What is Wireless LAN

Wireless Local Area Network (WLAN) systems offer a great number

advantages

over traditional wired systems. WLAN is flexible and easy to

setup

and manage. They

are also more economical than wired LAN

systems.

Using radio frequency (RF) technology, WLAN transmit and receive data

through

the air.

WLAN combine data connectivity with user mobility. For example,

users

can roam from

a conference room to their office without being disconnected

from

the

LAN.

Using WLAN, users can conveniently access-shared information, and

network

administrators can configure and augment networks without installing or

moving

network

cables.

WLAN technology provides users with many convenient and cost saving

features:

•

Mobility:

WLAN provide LAN users with access to real-time

information

anywhere in

their organization, providing service opportunities that

are

impossible with wired

networks.

•Ease of

Installation:

Installing is easy for novice and expert users

alike,

eliminating the

need to install network cables in walls and

ceilings.

•

Scalability:

WLAN can be configured in a variety of topologies to adapt

specific

applications and installations. Configurations are easily

changed

and range from

peer-to-peer networks suitable for a small number of

users

to full infrastructure networks

of thousands of users roaming over a

broad area.

SMCD3GNV5 Administrator Manual

Wireless LAN Modes

Wireless LANs can be configured in one of two

ways:

Ad-hoc Networking

Also known as a peer-to-peer network, an

ad-hoc

network is one that allows all workstations

and

computers in the network to act as servers to all

other

users on the network. Users on the

network can

files, print to a shared printer, and access the

Internet

with a shared modem.

However, with

ad-hoc

networking, users can only communicate with

other

wireless LAN

computers that are in the wireless

LAN

workgroup, and are within

range.

Infrasture Networking

Infrastructure networking differs from

ad-hoc networking

in that it includes an access point.

Unlike

the ad-hoc structure where users on the LAN

contend

the shared bandwidth, on an

infrastructure network

the

access point can manage the bandwidth to

maximize

bandwidth

utilization.

Additionally, the access point enables users on

wireless LAN to access an existing wired

network,

allowing wireless users to take advantage of the

wired

networks resources, such as

Internet, email,

file

transfer, and printer

sharing.

Infrastructure networking has the following

advantages

over ad-hoc

networking:

•Extended range: each wireless LAN

computer

within the range of the access point

can

communicate with other wireless LAN

computers

within range of the access

point.

•

Roaming:

the access point enables a

wireless

LAN computer to move through a building

and

still

be connected to the

LAN.

•Wired to

wireless

LAN

connectivity:

the

access

point bridges the gap between wireless

LANs

and

their wired

counterparts.

Table des matières

Autres manuels SMC Networks Module sans fil

SMC Networks

SMC Networks JI5-RT539222SB24 Manuel utilisateur

Manuels Module sans fil populaires d'autres marques

Laird

Laird RM024 Manuel utilisateur

Laird

Laird BT830-SA Guide de configuration rapide

Ebyte

Ebyte E49-400T20S Manuel utilisateur

Fibocom

Fibocom FM101-NA-20 Instructions d'installation

Waldmann

Waldmann EnOcean TALK MODUL G2 Manuel utilisateur

Smartech

Smartech LBT-1.DO4 Manuel utilisateur

Cooper Wiring Devices

Cooper Wiring Devices ESPIRE RF RFAPM Manuel utilisateur

Yuga

Yuga CLM920 Manuel utilisateur

Waldmann

Waldmann TALK Bluetooth Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions UC864-G Manuel d'installation

Ebyte

Ebyte E07-900M10S Manuel utilisateur

Quectel

Quectel SC690A Series Supplément

Panasonic

Panasonic INDUSTRY PAN9028 Guide de configuration rapide

Ebyte

Ebyte E70-433NW30S Manuel utilisateur

LongSung Technology

LongSung Technology U9507E Manuel utilisateur

Wistron NeWeb

Wistron NeWeb DNUR-S2 Manuel utilisateur

Ebyte

Ebyte E49-400M20S4 Manuel utilisateur

RF-Star

RF-Star SimpleLink RF-BM-2652P1 CC2652P Manuel utilisateur