SmartH WLS-1602F Manuel utilisateur
3 Way Smart Switch User Guide
Notes Before Installation
Wi-Fi Only support a 2.4GHz network (802.11 b/g/n)
Neutral wire Required.
basic electrical wiring knowledge or experience required , or please
consult a professional electrician
Never connect the neutral wire to any switch wires
ON/OFF Button also can be used as reset button, long press to
reset your smart switch to factory defaults. Only do this if you are
sure you want to erase all your settings
The yellow indicator light flashes
quickly after power on
NOTE:If there is no flashing, please press and hold
the switch until the yellow light flashes
lnstall Free App
Download APP: scan the QR code below to download and install. Register and
login: open the "MySmartH" APP to register and login according to the prompts.
Add The Device
-Manually mode
Make sure Wi-Fi is available and
connected to the Internet.
-Open "MySmartH" APP, press
the'+' in the upper right comer of
the main screen;
-choose "Electcal Engineering"、
click "3-Way Switch" to add Switch;
and then click "Next step";
Table des matières
Autres manuels SmartH Changer
