SMART Board 400 series Manuel utilisateur

SMARTBoard® 400 series

interactive display overlay

User’s guide

Product registration

If you register your SMART product, we’ll notify you of new features and software upgrades.

Keep the following information available in case you need to contact SMARTSupport.

Serial number:

Date of purchase:

FCC warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the US Federal Communications Commission Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

Trade-mark notice

SMARTBoard, SMARTNotebook, SMARTMeetingPro, SMARTGoWire, DViT, smarttech, the SMART logo and all SMART taglines are trade-marks or registered

trade-marks of SMARTTechnologiesULC in the US and/or other countries. Windows is either a registered trade-mark or a trade-mark of Microsoft Corporation in the US

and/or other countries. Mac and Macintosh are trade-marks of Apple Inc., registered in the US and other countries. All other third-party product and company names may be

trade-marks of their respective owners.

into any language in any form by any means without the prior written consent of SMARTTechnologiesULC. Information in this manual is subject to change without notice

and does not represent a commitment on the part of SMART.One or more of the following patents: US6320597; US6326954; US6563491; US6741267; US6947032;

US6954197; US7151533; US7411575; US7499033; US7619617; US7629987; US7643006; US7692625; US7757001; US7880720; US7932899; USD612396; USD616462;

USD617332; and USD636784. Other patents pending.

10/2011

Important information for your

interactive display overlay

W W A R N I N G

lFailure to follow the installation instructions included with your SMART product could result

in personal injury and damage to the product which may not be covered by your warranty.

lEnsure that any cables extending across the floor to your SMARTproduct are properly

bundled and marked to avoid a trip hazard.

lYou must connect the USB cable that came with your interactive display overlay to a

computer that has a USB compliant interface and that bears the USB logo. In addition, the

USB source computer must be compliant with CSA/UL/EN 60950 and bear the CE mark and

CSA and/or UL Mark(s) for CSA/UL 60950. This is for operating safety and to avoid damage

to the interactive display overlay which may not be covered by your warranty.

lTo reduce the risk of fire or electric shock, do not expose the SMART product to rain or

moisture.

C C A U T I ON

lBefore you clean your SMART product, shut down or disconnect the computer. Otherwise,

you may scramble the desktop icons or inadvertently activate applications when you wipe

the screen.

lDo not use harsh cleaners on your interactive display overlay screen because these products

could damage the screen.

lDo not spray cleaners directly onto your screen. Spray onto a cloth first and then clean the

screen.

lDo not clean the cameras in the corners of the interactive display overlay unless you are

directed to by SMARTSupport.

lAvoid setting up and using the SMARTproduct in an area with excessive levels of dust,

humidity and smoke.

iii

Contents
Important information for your interactive display overlay iii
Chapter 1: About your interactive display overlay 1
Your SMARTBoard 400 series interactive display overlay 2
Features of your interactive display overlay 2
Accessories and replacement parts 3
Chapter 2: Setting up your interactive display overlay 5
Installing your interactive display overlay 5
Connecting your interactive display overlay to your computer 7
Chapter 3: Installing SMARTsoftware 9
Identifying your SMART software package 9
Installing SMARTMeetingPro software 10
Connecting a SMARTGoWire cable 10
Installing SMARTNotebook software 11
Chapter 4: Using your interactive display overlay 13
Orientating your interactive display overlay 13
Using touch control 14
Using multitouch gestures in Windows 7 operating system 15
Using SMARTMeetingPro software 15
Using SMARTNotebook software 17
Chapter 5: Maintaining your interactive display overlay 19
Cleaning your interactive display overlay 19
Updating SMART software 20
Transporting your interactive display overlay 20
Chapter 6: Troubleshooting your interactive display overlay 21
Appendix A: Hardware environmental compliance 23
Waste Electrical and Electronic Equipment regulations (WEEE directive) 23
Restriction of Certain Hazardous Substances (RoHS directive) 23
Packaging 23
Covered electronic devices 24
China’s Electronic Information Products regulations 24
Restriction of Certain Chemicals (REACH directive) 24
i

Chapter 1: About your interactive display

overlay

Your SMARTBoard 400 series interactive display overlay 2

Features of your interactive display overlay 2

Software 2

Touch 2

DViT® (DigitalVisionTouch) technology 2

USB cable 3

Accessories and replacement parts 3

When you mount your SMARTBoard® 400 series interactive display overlay on a compatible flat-

panel display and connect it to a computer with SMART software, you have touch control of your

computer’s desktop from your interactive display overlay screen and can write and erase digital ink.

Chapter 1

Your SMARTBoard 400 series interactive

display overlay

Use the illustration below to familiarise yourself with the components of your interactive display

overlay.

Features of your interactive display overlay

Software

To use all of the features of your interactive display overlay described in this guide, ensure that you

have the latest version of SMARTsoftware and SMARTProduct Drivers installed on your computer.

Touch

Perform mouse functions with your finger, write in digital ink with the pen included and erase digital

ink.

DViT® (DigitalVisionTouch) technology

DViT technology uses cameras in the corners of the frame to track contact with the surface of the

interactive display overlay.

C H A P T E R 1

Introducing your SMART Board interactive display overlay

USB cable

The USB cable included provides both power to your interactive display overlay and touch control of

your desktop.

Accessories and replacement parts

The following products can be used with your interactive display overlay.

CAT5-XT Cat 5 USB extender. You require a powered hub to use a Cat 5

USB extender with the interactive display overlay.

RPENLEDGE-SBID4 Replacement pen ledge for the SMARTBoard 400 series

interactive display overlay.

RPEN-SBID4 Replacement pen and nibs for the SMARTBoard 400 series

interactive display overlay.

GW-MP SMARTGoWire™ auto-launch cable for business.

C H A P T E R 1

Introducing your SMART Board interactive display overlay

Autres manuels pour Board 400 series

Table des matières

Autres manuels SMART Moniteur

SMART

SMART MX Series Manuel du produit

SMART

SMART 8070i Manuel utilisateur

SMART

SMART MX Series Manuel utilisateur

SMART

SMART SBID-MX165 Manuel utilisateur

SMART

SMART SMART Board GX Series Manuel du produit

SMART

SMART Board 400 series Manuel utilisateur

SMART

SMART MN600 Cinema STEREOCHECK Manuel utilisateur

SMART

SMART SPNL-6065 Manuel utilisateur

SMART

SMART MX Series Manuel utilisateur

SMART

SMART MN610 Manuel utilisateur

SMART

SMART Board MX V2 Pro Series Mode d’emploi

SMART

SMART MX Series Manuel utilisateur

SMART

SMART Board 6000 Series Manuel utilisateur

SMART

SMART MX Series Manuel d'utilisation et d'entretien

SMART

SMART Board MX V2 Series Manuel utilisateur

SMART

SMART Sympodium IC-150 Manuel utilisateur

SMART

SMART MX Series Manuel du produit

SMART

SMART SBD-2075P Manuel utilisateur

SMART

SMART Board 6000 Series Manuel utilisateur

SMART

SMART Board M700 Series Manuel utilisateur

SMART

SMART 6000 Pro Series Manuel utilisateur

SMART

SMART Board MX (V2) Series Mode d’emploi

SMART

SMART MN596 Active Stereo Booth Monitor Guide d'installation

SMART

SMART SBID-7075 Manuel du produit

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation