Smart Witness AP1 Manuel utilisateur
ADD HEADER SPECIFIC TO SECTION
Page 1of 38
AP1 CONFIGURATION
TOOL GUIDE
V4.0
A jumpstart to
video telematics
configuration
Page 2of 38
Table of Contents
1.0 Welcome to your AP1 Configuration Guide ................................................................................................................................................ 3
2.0 AP1 Configuration Tool Installation............................................................................................................................................................ 4
2.1 Downloading & Installing Your Configuration Tool.................................................................................................................................. 4
3.0 AP1 Configuration Tool Layout & Settings .................................................................................................................................................. 5
3.1 ADAS Event Definitions .......................................................................................................................................................................... 6
4.0 Configuring Your Device............................................................................................................................................................................. 8
4.1 How to Configure Device/Vehicle Tab .................................................................................................................................................... 8
4.2 How to Configure Record Tab................................................................................................................................................................13
4.4 How to Configure Event Tab..................................................................................................................................................................17
4.4.1 Event Table ..........................................................................................................................................................................................18
4.4.2 Event Settings ......................................................................................................................................................................................19
4.5 How to Configure Connectivity Tab .......................................................................................................................................................25
4.6 How to Configure Server Tab.................................................................................................................................................................28
4.7 How to Configure Information Tab ........................................................................................................................................................31
4.8 How to Configure G-Sensor Tab.............................................................................................................................................................34
5.0 Finishing Up/Support ................................................................................................................................................................................38
5.1 Support Information .............................................................................................................................................................................38
Introduction
Page 3of 38
1.0 Welcome to your AP1 Configuration Guide
This guide aims to inform end-users of the proper processes involved in setting up your
SmartWitness AP1 device.
While the AP1 Configuration Guide gives you a step-by-step walkthrough of each function
within the Configuration Tool, the preferred configuration method remains the AP1
Calibration Tool (available on iOS and Android).
This step-by-step walkthrough will act as your teacher as you learn our product’s layout,
functionality, and configuration settings.
You can find an overview of the configuration tool’s layout in section 3.0.
The fastest way to find information in this document is through the Table of Contents.
We hope that this tutorial will be sufficient in removing common end-user pain points
involved with the setup process. If you experience any issues with this guide, please lend us
your feedback and/or contact our support teams.
AP1 Download & Installation
Page 4of 38
2.0 AP1 Configuration Tool Installation
Goal:Locate and install your configuration wizard
2.1 Downloading & Installing Your Configuration Tool
Download configuration software HERE.
1. After download, continue to installation.
2. Open the configuration tool, and insert your SD Card.
3. Click Initialize SD Card.
4. Select SD Card from your preferred internet browser.
5. Click Start to initialize.
Note: The maximum size supported for your SD card is 128 GB.
AP1 Configuration Tool Layout
Page 5of 38
3.0 AP1 Configuration Tool Layout & Settings
Goal: Understand your tool’s main features
ADAS Event Definitions
Page 6of 38
3.1 ADAS Event Definitions
To better understand the settings and functions of ADAS (Advanced Driver Assistance
Systems) events in the Event tab, please see the definitions below.
Note: Sensitivity settings are on a scale of 1 – 5, 1 being the lowest and 5 being the highest.
Event Type
Event Definition
Sensitivity Setting
FCW
Forward Collision Warning - Detects an imminent
collision with something ahead.
The higher the sensitivity, the earlier the alert
arrives before a possible collision.
FPW
Forward Proximity Warning - Something is in
forward proximity, and an imminent collision
with your vehicle is possible at low speeds.
The higher the sensitivity,the greater the distance is
that you’re alerted before a potential collision.
HMW
Headway Monitoring & Warning - Monitors
distance to the vehicle ahead at higher speeds.
Also referred to as “Tailgating.”
The higher the sensitivity,the earlier you’re alerted
for breaching an unsafe distance to the vehicle
ahead.
FVSA
Forward Vehicle Start Alert - Vehicles in front of
you begin to move while your vehicle remains
stopped.
The higher the sensitivity,the more time you have
before you’re alerted that the vehicle in front of you
moved.
LDW
Lane Departure Warning - Your vehicle crosses a
solid lane line on either side of the road.
The higher the sensitivity, the greater the distance is
before you’re alerted that you may cross over the
driving lane.
Example:
Sensitivity = 1, Distance to driving lane = + 20cm
(Over the lane)
Sensitivity = 5, Distance to driving lane = - 20cm
(Before the lane)
ADAS Event Definitions
Page 7of 38
FCW2
Forward Collision Warning #2 - Detects another
vehicle abruptly crossing into your vehicle’s lane,
causing the potential for collision.
Change the alert sound intensity.
Generates a TTC (Time to Collision) measurement in
the same fashion as FCW.
RLC
Rapid Lane Change - Your vehicle quickly changes
lanes and crossing lane lines.
Measured by velocity (cm/sec = horizontal distance
changed in a period of time) and length of vehicle to
lane line.
Uses the same algorithm as LDW.
FLC
Frequent Lane Change - Your vehicle is crossing
many lanes in a specified window of time
(weaving).
Measured by the number of lanes changed in a
period (sec).
Uses the same algorithm as LDW.
RD
Rapid Deceleration -Your vehicle quickly
decelerates to a specified speed in a window of
time.
Measured by a vehicle is decreasing over ___ km/h
from current speed within __ seconds.
Measured using speed data. This reduces extra data
from G-Sensor events to the Smart API server, saving
cellular data.
First, consult with SmartWitness before enabling this
event. Our platform already identifies these
instances, so there could be duplicates if you
activate this event without prior discussion with the
integration team.
Device/Vehicle
Page 8of 38
4.0 Configuring Your Device
Goal: Personalize and optimize your device’s settings.
4.1 How to Configure Device/Vehicle Tab
Device/Vehicle Tab Layout: At a Glance
Device/Vehicle
Page 9of 38
1. Select from Disable options to turn your
AP1’s ADAS features on or off.
2. Select how your device gauges its speed.
•Auto: Your device will automatically
detect a speed source (OBD port or
GPS)
•OBD II: Monitor speed from your
vehicle’s OBD port only.
•GPS: Speed comes from your AP1’s
GPS chip only. This will deactivate
ADAS functions.
3. To set a threshold when your device
automatically goes offline due to low
power input, enter a Sleep/Cut Voltage
value.The recommended voltage range
is 11.5~12v.
4. Determine a Winter Period for your
device.
•Example: 1 = November, 2 =
February.
Device/Vehicle
Page 10 of 38
ADAS
5. Follow the diagrams and enter your
vehicle’s measurements. You can select
cm or inch in the tool’s settings.
Note: Your vehicle’s manual may supply
some of these measurements. You can
select cm or inch in the tool’s settings.
Autres manuels pour AP1
3
Table des matières
Autres manuels Smart Witness Appareil photo numérique
Smart Witness
Smart Witness KP1 Manuel utilisateur
Smart Witness
Smart Witness AP1 Mode d’emploi
Smart Witness
Smart Witness smart-i Manuel utilisateur
Smart Witness
Smart Witness AP1 Mode d’emploi
Smart Witness
Smart Witness KP1 Fiche technique
Smart Witness
Smart Witness KP1S Manuel utilisateur
Smart Witness
Smart Witness CP Series Manuel utilisateur
