SMART Embedded Computing PCIE-6001 Manuel utilisateur

1 Box contents

Make sure you receive all items of your shipment:

• One PCIE-6001 card

• Four (4) M2.5 x 4 mm shoulder screws

• Four (4) M2.5 x 4 mm screws

• Four (4) 6 mm long (diameter 3 mm) M2.5 hex standoffs

• One printed copy of Quick Start Guide (this document)

• One printed Safety Notes Summary

• Any other optional items ordered

When installing or servicing the system or accessories,

strictly observe the safety precautions in the Safety Notes

Summary. Ignoring these instructions can void the system

warranty and cause personal injury or property damage.

2 ESD

Electrostatic discharge and incorrect installation or

removal of the card can damage circuit or shorten its life.

Use a properly grounded ESD wrist strap or work in an

ESD-safe environment.

Connect to the ESD connector at the front or the rear of

the system.

3 Site preparation

For information on the environmental and power requirements, see

PCIE-6001 Installation and Use manual.

Operating temperatures refer to the temperature of the air circulating

around the blade and not to the actual component temperature.

4 Install M2 AHCI or NVMe

SSD modules on card

1. Install M2.5 screw and standoff in the PCB hole location

based on the length of the M.2 module.

2. Install the M.2 module.

3. Install the M.2 shoulder screw. Torque should not exceed 0.1Nm.

For information, refer to the PCIE-6001 Installation and Use manual.

5 Install PCIE-6001 card

1. Turn off the system, including any attached peripherals, and

disconnect the system from the electrical outlet and

peripheral.

2. Remove the system cover.

3. Insert the PCIE-6001 card into the selected PCIe slot and ensure

the card is properly fitted in the PCIe slot, and then secure the

card using a panel screw.

Note 1: For more information about installing a PCIe card in a

MaxCore Platform, refer to MaxCore™ MC3000 Platform Installation

and Use manual or for installing in non-SMART EC systems, refer to

respective manufacturer’s installation and use manuals.

Note 2:In case the system may be exposed to temperatures above

room temperature while operated, to optimize the airflow to the

PCIE-6001 card it is recommended to install slot filler cards. These

filler cards need to be installed in any empty PCIe slot to the right

(next higher slot number) of a PCIE-6001 card.

4. Close the system cover.

6 Powering the rack

Push the power button on the system's IO Panel or use the system's

Board Management Controller (BMC) web interface to power the

system remotely.

PCIE-6001

Quick Start Guide

P/N: 6806800U74B December 2019

M2.5 shoulder screw M2.5 screw Standoff

Top View

Side View

Technical Assistance

For technical assistance or to report product damage or shortages,

contact your local SMART Embedded Computing sales

representative or visit https://www.smartembedded.com/ec/support/

Get More Information

For more information on this product, see the

PCIE-6001 Installation and Use manual and other

related technical documentation, which can be found

by using the Documentation Search at

https://www.smartembedded.com/ec/support/.

PCIE-6001 Quick Start Guide

SMART Embedded Computing, 2900 S. Diablo Way, Suite 190, Tempe, Arizona 85282

“SMART” is a registered trademark of SMART Modular Technologies, Inc. and “SMART

Embedded Computing” and the SMART Embedded Computing logo are trademarks of

SMART Modular Technologies, Inc. All other names and logos referred to are trade names,

trademarks, or registered trademarks of their respective owners. These materials are

provided by SMART Embedded Computing as a service to its customers and may be used

for informational purposes only. For full legal terms and conditions, visit

www.smartembedded.com/ec/legal.

Autres manuels SMART Embedded Computing Ordinateur monocarte

SMART Embedded Computing

SMART Embedded Computing MVME7100ET Guide de démarrage rapide

SMART Embedded Computing

SMART Embedded Computing MVME8100 Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing MVME2500 Guide de démarrage rapide

SMART Embedded Computing

SMART Embedded Computing COMX-CORE-2610-ET Mode d’emploi

SMART Embedded Computing

SMART Embedded Computing MVME2500 Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing MVME3100 Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing PCIE-8130-HL Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing MVME4100 Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing MaxCore MC3000 Fiche technique

Manuels Ordinateur monocarte populaires d'autres marques

WIN Enterprises

WIN Enterprises PL-80910 Manuel utilisateur

AXIOMTEK

AXIOMTEK SBC81206 Series Manuel utilisateur

Embest

Embest SOM-PH8800 Manuel utilisateur

SeaLevel

SeaLevel SBC-R9 Manuel utilisateur

WinSystems

WinSystems PPM-LX800-G Manuel utilisateur

GIGAIPC

GIGAIPC QBiX-PPC Series Manuel utilisateur

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manuel utilisateur

Commell

Commell FS-978 Manuel utilisateur

GIGAIPC

GIGAIPC QBiP-8665A/ Manuel utilisateur

VersaLogic

VersaLogic Python EBX-11 Manuel utilisateur

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manuel utilisateur

CompuLab

CompuLab SB-A510 Manuel utilisateur

Boser

Boser HS-7321 Manuel utilisateur

Premier Farnell

Premier Farnell Embest SBC8530 Manuel utilisateur

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manuel utilisateur

Aaeon

Aaeon UP Manuel utilisateur

Portwell

Portwell WUX Series Manuel utilisateur

Lanner electronics

Lanner electronics IAC-F847 Series Manuel utilisateur