SMART Embedded Computing MVME2500 Manuel utilisateur

MVME2500 VxWorks 6.8 AMP

User Guide

P/N: 6806800M27C

September 2019

Trademarks

The stylized "S" and "SMART" is a registered trademark of SMART Modular Technologies, Inc. and “SMART Embedded

Computing” and the SMART Embedded Computing logo are trademarks of SMART Modular Technologies, Inc. All other names

and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. These materials are

provided by SMART Embedded Computing as a service to its customers and may be used for informational purposes only.

Disclaimer*

SMART Embedded Computing (SMART EC) assumes no responsibility for errors or omissions in these materials. These

materials are provided "AS IS" without warranty of any kind, either expressed or implied, including but not limited to,

the implied warranties of merchantability, fitness for a particular purpose, or non-infringement. SMART EC further does

not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these

materials. SMART EC shall not be liable for any special, indirect, incidental, or consequential damages, including without

limitation, lost revenues or lost profits, which may result from the use of these materials. SMART EC may make changes to

these materials, or to the products described therein, at any time without notice. SMART EC makes no commitment to update

the information contained within these materials.

Electronic versions of this material may be read online, downloaded for personal use, or referenced in another document as a

URL to a SMART EC website. The text itself may not be published commercially in print or electronic form, edited, translated,

or otherwise altered without the permission of SMART EC.

It is possible that this publication may contain reference to or information about SMART EC products, programming, or services

that are not available in your country. Such references or information must not be construed to mean that SMART EC intends

to announce such SMART EC products, programming, or services in your country.

Limited and Restricted Rights Legend

If the documentation contained herein is supplied, directly or indirectly, to the U.S. Government, the following notice shall apply

unless otherwise agreed to in writing by SMART Embedded Computing.

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (b)(3) of the Rights in

Technical Data clause at DFARS 252.227-7013 (Nov. 1995) and of the Rights in Noncommercial Computer Software and

Documentation clause at DFARS 252.227-7014 (Jun. 1995).

SMART Embedded Computing, Inc.

2900 S. Diablo Way, Suite 190

Tempe, Arizona 85282

USA

*For full legal terms and conditions, visit www.smartembedded.com/ec/legal

Table of Contents

MVME2500 VxWorks 6.8 AMP User Guide (6806800M27C) 3

About this Manual ................................................................5

1 Introduction..................................................................9

1.1 Overview ................................................................9

1.2 Deliverables .............................................................9

2 Booting VxWorks ............................................................11

2.1 Introduction .............................................................11

2.2 Network Boot ...........................................................11

2.2.1 Prerequisites ......................................................11

2.2.2 Booting Procedure ..................................................11

2.3 Disk Boot ..............................................................13

2.3.1 Prerequisites ......................................................13

2.3.2 Booting Procedure ..................................................13

2.4 USB Boot ..............................................................15

2.4.1 Prerequisites ......................................................15

2.4.2 Booting Procedure ..................................................15

3 Building Board Support Package ...............................................17

3.1 Building Procedure .......................................................17

A Sample Output ..............................................................27

A.1 Network Boot ...........................................................27

A.1.1 VxWorks Booting on Core 0...........................................27

A.1.2 VxWorks Booting on Core 1...........................................29

A.2 Disk Boot ..............................................................30

A.2.1 VxWorks Booting on Core 0...........................................30

A.2.2 VxWorks Booting on Core 1...........................................31

A.3 USB Boot ..............................................................33

A.3.1 VxWorks Booting on Core 0...........................................33

A.3.2 VxWorks Booting on Core 1...........................................34

4 MVME2500 VxWorks 6.8 AMP User Guide (6806800M27C)

Table of Contents

B Related Documentation .......................................................37

B.1 SMART Embedded Computing Documentation .................................37

MVME2500 VxWorks 6.8 AMP User Guide (6806800M27C) 5

About this Manual

Overview of Contents

This manual is divided into the following chapters and appendix:

Chapter 1, Introduction on page 9, provides an overview of this manual.

Chapter 2, Booting VxWorks on page 11, describes the procedure to boot VxWorks 6.8

AMP on the MVME2500.

Chapter 3, Building Board Support Package on page 17, describes the procedure to build

Board Support Package (BSP).

Appendix A, Sample Output on page 27, provides the sample output of VxWorks 6.8 AMP

booting through network, disk and USB.

Appendix B, Related Documentation on page 37 lists the related documents of VxWorks on

the MVME2500 6.8 AMP.

Abbreviations

This document uses the following abbreviations:

Abbreviation Definition

AMP Asymmetric Multiprocessing

BSP Board Support Package

FTP File Transfer Protocol

IP Internet Protocol

SATA Serial Advanced Technology Attachment

SBC Single Board Computer

TFTP Trivial File Transfer Protocol

6 MVME2500 VxWorks 6.8 AMP User Guide (6806800M27C)

About this Manua

About this Manual

Conventions

The following table describes the conventions used throughout this manual.

Notation Description

0x00000000 Typical notation for hexadecimal numbers (digits are 0 through F), for

example used for addresses and offsets

0b0000 Same for binary numbers (digits are 0 and 1)

bold Used to emphasize a word

Screen Used for on-screen output and code related elements or commands.

Sample of Programming used in a table (9pt)

Courier + Bold Used to characterize user input and to separate it from system output

Reference Used for references and for table and figure descriptions

File > Exit Notation for selecting a sub-menu

<text> Notation for variables and keys

[text] Notation for software buttons to click on the screen and parameter

description

... Repeated item for example node 1, node 2, ..., node 12

Omission of information from example/command that is not necessary at

the time

.. Ranges, for example: 0..4 means one of the integers 0,1,2,3, and 4 (used

in registers)

| Logical OR

Indicates a hazardous situation which, if not avoided, could result in death

or serious injury

Indicates a hazardous situation which, if not avoided, may result in minor

or moderate injury

About this Manual

MVME2500 VxWorks 6.8 AMP User Guide (6806800M27C) 7

Summary of Changes

This manual has been revised and replaces all prior editions.

Indicates a property damage message

Indicates a hot surface that could result in moderate or serious injury

Indicates an electrical situation that could result in moderate injury or death

Indicates that when working in an ESD environment care should be taken

to use proper ESD practices

No danger encountered, pay attention to important information

Notation Description

Part Number Publication Date Description

6806800M27C September 2019

Re-branded to SMART Embedded Computing

template. Updated Conventions table; updated

Freescale to NXP; updated Related

Documentation paragraph.

6806800M27B August 2014 Re-branded to Artesyn template.

6806800M27A April 2011 Initial version

8 MVME2500 VxWorks 6.8 AMP User Guide (6806800M27C)

About this Manua

About this Manual

MVME2500 VxWorks 6.8 AMP User Guide (6806800M27C) 9

Chapter 1

Introduction

1.1 Overview

The MVME2500 Single Board Computer (SBC) is a VMEbus board, which features a

single-core P2010 or the dual-core P2020 NXP® QorIQ® processors.

VxWorks 6.8 Asymmetric Multiprocessing (AMP) allows the independent instances of the

VxWorks operating system to run on the individual CPUs of a multi-core processor.

This document describes the procedure to boot the VxWorks 6.8 AMP on the MVME25000

board.

1.2 Deliverables

The following table lists the MVME2500 deliverables.

Table 1-1 List of Deliverables

Name Description

vxWorks_00.st VxWorks boot image file for Core 0

vxWorks_01.st VxWorks boot image file for Core 1

mvme2500_AMP_rel1.0.tar.gz VxWorks 6.8 AMP Board Support Package (BSP) for

MVME2500

10 MVME2500 VxWorks 6.8 AMP User Guide (6806800M27C)

Introduction

Autres manuels pour MVME2500

Table des matières

Autres manuels SMART Embedded Computing Ordinateur monocarte

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing MVME4100 Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing PCIE-8130-HL Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing MaxCore MC3000 Fiche technique

SMART Embedded Computing

SMART Embedded Computing MVME3100 Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing PCIE-6001 Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing MVME2500 Guide de démarrage rapide

SMART Embedded Computing

SMART Embedded Computing MVME8100 Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing COMX-CORE-2610-ET Mode d’emploi

SMART Embedded Computing

SMART Embedded Computing MVME7100ET Guide de démarrage rapide

Manuels Ordinateur monocarte populaires d'autres marques

WIN Enterprises

WIN Enterprises PL-80910 Manuel utilisateur

AXIOMTEK

AXIOMTEK SBC81206 Series Manuel utilisateur

Embest

Embest SOM-PH8800 Manuel utilisateur

SeaLevel

SeaLevel SBC-R9 Manuel utilisateur

WinSystems

WinSystems PPM-LX800-G Manuel utilisateur

GIGAIPC

GIGAIPC QBiX-PPC Series Manuel utilisateur

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manuel utilisateur

Commell

Commell FS-978 Manuel utilisateur

GIGAIPC

GIGAIPC QBiP-8665A/ Manuel utilisateur

VersaLogic

VersaLogic Python EBX-11 Manuel utilisateur

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manuel utilisateur

CompuLab

CompuLab SB-A510 Manuel utilisateur

Boser

Boser HS-7321 Manuel utilisateur

Premier Farnell

Premier Farnell Embest SBC8530 Manuel utilisateur

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manuel utilisateur

Aaeon

Aaeon UP Manuel utilisateur

Portwell

Portwell WUX Series Manuel utilisateur

Lanner electronics

Lanner electronics IAC-F847 Series Manuel utilisateur