Slime 40001 Manuel utilisateur

The Power Sport Tire Inflator is perfect for maintaining proper

tire pressure on motorcycles, ATVs, trailers, bicycles and other

inflatables. The compact size and rigid case allow for easy storage,

making it easy and convenient to maintain proper tire pressure.

When tire pressure is properly maintained the tread life of the tire

is maximized, fuel economy is increased and vehicle handling is

improved.

OWER

PORT

IRE

NFLATOR

IIRE RE

NNFLFLAATTOROR

PART# 40001

ATTENTION! READ ALL

INSTRUCTIONS CAREFULLY

Failure to follow warning instructions can result in fire, injury to persons or property damage.

1. Select appropriate power connection adaptor with fuse

(A, B or C below) and attach adaptor to 8’ main harness power cord.

A • Attaches directly to battery (motorcycle)

B • Clips to battery (ATV/mower)

C • Plugs into DC power outlet (auto)

2. Attach (A, B or C) adaptor to power source and clip air hose to tire

valve.

3. Flip switch ON and inflate tire to recommended PSI.

B C

TIRE INFLATOR SET-UP INSTRUCTIONS

1. For use with 12-volt DC power outlet rated 15 amps or higher.

Do not use with older 8 amp cigarette lighter receptacles.

2. You may need to be in “accessory” or “on” position. Please

make sure emergency brake is set and car is in park. Always

ensure air hose chuck touches the core of the valve stem for

proper inflation.

3. Inflator is not designed for use on high pressure tires such as

truck tires. This inflator is not designed to operate for the length

of time it would take to inflate these large tires.

4. WARNING: DO NOT use inflator continuously for more than

10 minutes. Inflator is designed for occasional use ONLY.

Extended operation will overheat the unit causing damage.

Sluggish operation or exposed metal fittings too hot to the

touch indicate the unit has been operating too long. If either

occurs, turn the unit OFF and allow to cool for 25 minutes or

more prior to resuming operation.

5. Do not leave inflator unattended while the unit is running.

ALWAYS use a pressure gauge to check actual tire pressure.

DO NOT OVERINFLATE!

TROUBLESHOOTING

Inflator fails to operate when plugged in:

1. The fuse, located in the plug adaptor (C), may

have blown. Unscrew the tip of the plug

adaptor, remove fuse, and inspect.

(If necessary, replace fuse with one of the

same amperage.)

2. The fuse, located in the power connection

adaptors (A, B), may have blown. Unclasp the

power connection adaptor, remove fuse, and

inspect. (If necessary, replace fuse with one of

the same amperage.)

Inflator does not start or blows fuses:

1. Push the power plug firmly into the receptacle and twist it back and forth.

2. Check receptacle and plug terminals for dirt, particularly tobacco.

(Use a nonconductive probe, not fingers or metal to dislodge and remove debris.)

3. Check vehicle power outlet fuse - should be 15 amps minimum.

Inflator runs but does not inflate:

1. Be sure the connector is on the valve stem as far as possible before closing locking lever.

2. Check tire for leaks, and check hose for breaks and leaks at fittings.

Inflator runs slowly:

1. Overheated from excessive use, shut it off and allow to cool for 25 minutes.

2. Voltage too low, check condition of battery.

NOTE: If tire is totally deflated, it is possible that the tire could separate from the

rim allowing air to leak out when trying to inflate. In the event this occurs, you

will have to jack up the tire prior to inflation.

CAUTION: Keep inflator out of reach of children. Always use a tire gauge to

check the actual pressure in tires. Do not overinflate tire.

On our website you can discover more about tools and garage.

Table des matières

Autres manuels Slime Outils électriques

Slime

Slime PRO POWER Manuel utilisateur

Slime

Slime 40038 Manuel utilisateur

Slime

Slime DUAL POWER 40052 Manuel utilisateur

Slime

Slime GARAGE INFLATION STATION Manuel utilisateur

Slime

Slime 50139 Manuel utilisateur

Slime

Slime 40060 Manuel utilisateur

Slime

Slime 40030 Manuel utilisateur

Slime

Slime 40046 Manuel utilisateur

Slime

Slime Pro Power 40030 Manuel utilisateur

Slime

Slime Power Sport 40001 Manuel utilisateur

Slime

Slime 40058 Manuel utilisateur

Slime

Slime 40031 Manuel utilisateur

Slime

Slime 40048 Manuel utilisateur

Slime

Slime 40050 Manuel utilisateur

Slime

Slime 50063 Manuel utilisateur

Slime

Slime 40050 Manuel utilisateur

Slime

Slime 40059 Manuel utilisateur

Slime

Slime 40046 Manuel utilisateur

Slime

Slime 40029 Manuel utilisateur

Slime

Slime 40050 Manuel utilisateur

Slime

Slime 40045 Manuel utilisateur

Slime

Slime PRO POWER Manuel utilisateur

Slime

Slime 40065 Manuel utilisateur

Slime

Slime 40022 Manuel utilisateur

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel