Skymsen BPS-12 Manuel utilisateur
24595.0 - June / 2013
Planetary Mixer / Batidora Planetaria
Model / Modelos
BPS-12
Instructions Manual / Manual de Instrucciones
Office
Phone: 1-800-503-7534 / 305-868-1603
Fax: 305-866-2704
TOLL FREE 1-800-503-7534
SUMMARY / INDICE
1. ENGLISH 01
2. ESPAÑOL 11
BPS-12
02
02
02
03
03
03
03
06
06
07
08
09
09
08
09
10
09
03
03
04
04
04
04
1.Introduction
1.1.Safety
1.2.Main Spare Parts
1.3.Technical Data
2.Instalation and Pre - Installation
2.1.Installation
2.2.Pre-Installation
3.Operation
3.1.Starting
3.2.Feeding Procedures
3.3.Agitators Assembling
3.4.Bowl Assembling
3.5.Cleaning
4.General Safety Practices
4.1.Basic Operation Procedures
4.2.Warnings before starting the machine.
4.3.Routine Inspections
4.4.Operation
4.5.After work
4.6.Maintenance
5.Problems Analysis and Resolution
5.1.Problems, Causes and Solutions
5.2.Eletric Diagram
SUMMARY
01
02
1. Introduction:
1.1 Safety
When not properly used the Planetary Mixers are potentially dangerous machines.
Maintenance, cleaning or any other operation shall be made by trained people. Plug has to
be off the outlet during any of these operations.
Remove plug from outlet when you wish to remove any removable part during cleaning,
maintenance or any other operation.
Never make use of any tool or instrument that is not originally part of the machine for any
operation. Be sure that removable parts are properly attached to its correct position.
Never throw water directly on the machine.
Keep hands off turning parts.
DO NOT operate the machine wearing wet clothes or wet shoes.
Be sure the machine is grounded.
Operator has to tie his/her hair up before starting the operation.
Keep this manual and have it handy for use any time.
1.2 Main Components:
All components that are part of the machine were designed and made to its proper function
according to pattern tests and experience of Siemsen. The new concept of the steel plate
used in this machine makes it a sanitary safe and clean machine.
03
1.3 Technical Features
2.1 Installation
Planetary Mixer Model BPS-12, shall be installed on a flat and firm preferrably 850mm high
surface .
2. Instalation and Pre Operation
(*) See nameplate for correct voltage and frequency.
2.2 Pre-Operation
Check if the Planetary Mixer is stable on the surface. Before using the machine, remove and
wash all removable parts. For your safety, read carefully iten "3.5 Cleaning" in this Manual.
TABLE 01
Characteristics U.M. BPS-12
Bowl capacity (wiithout agitators)
[qt] 12
Voltage [V] 110 / 220 (*)
Frequency [Hz] 50 or 60 (*)
Rating [HP] 0,50
Consumption [kW/h] 0,37
Height [Inches] 24 7/16”
Width [Inches] 15 3/4”
Depth [Inches] 26 3/8”
Net weight [lb] 107
Gross weight [lb] 136
3.1
3. Operation
To start the machine you have to push the ON/OFF button (No. 2 Pic 01), located on the side
of the cabinet.
Obs: The machine will start only when the safety cage is down.
Model Maximum LoadMinimum Load
BPS-12 3 liter ou 30 eggs
1 liter or 15 eggs
Load Chart
04
3.2 Feeding Procedures
Choose the agitator to be used: Whip (No.1 Pic 03), Racket (No. 01 Pic 02) or Hook (No. 01
Pic 03), put the ingredients into the Bowl (No.01 Pic 05), move down the Safety Cage (No.01
Pic 01), turn the machine on and select the speed (Nº01 Pic. 05).
3.3 Agitators Assembling
All agitators (Pic 01 / 02 and 03) are assembled in the same way.
*Lift theAgitator Shaft Holder (No.01 Pic 07), placed in the shaft (No.02 Pic 07).
*Place the hole, located in theAgitator, in the Pin (No.03 Pic 07).
*Move theAgitator Shaft Holder down(No.01 Pic 07).
3.4 Bowl Assembling
* Place the Bowl on the base of the machine (No.4 Pic.1).
*Turn the Bowl clockwise until the Knob (No.03 Pic 06) is perfectly fitted in the slot (No.02 Pic
06)
*Tighten both Knobs (No.03 Pic 06)
All removable parts must be removed and cleaned. Clean with water and Neutral Soap.
3.5 Cleaning
Important
Never do cleaning with the machine plugged in, always unplug the machine before
cleaning.
Important
Neve throw water directly on the machine.
Important
Only change speeds with the machine turned on.
Pic-01
03
02
04
01
05
05
Pic-02 Pic-03 Pic-04
Pic-06Pic-05
Pic-07
01 01 01
02
03
01
01 02
03
01
service company ("Service Company"). Products held at commercial facilities and weighing
less than seventy (70) lbs. must be taken or shipped, shipping charges are prepaid, either
to SKYFOOD's facility or to a Service Company. Mileage or travel time will NOT be paid.
SKYFOOD offers a limited on-site warranty for products ONLY held at commercial
facilities, whose net weight exceeds seventy (70) lbs., provided they are installed in a
location that is within a thirty (30) mile radius of a Service Company. End Users are
responsible for all extra travel and mileage rates. In this case, warranty services will be
provided during regular business hours.
This product will be replaced or repaired under warranty, for a period of (1) year,
beginning from the date of purchase by the original purchaser/user (“End User”).
Accessories will be replaced or repaired under warranty, for a period of (30) days,
beginning from the date of purchase by the original purchaser/user (“End User”).
This warranty shall not take effect until a properly completed and executed WARRANTY
REGISTRATION form has been received by SKYFOOD EQUIPMENT, LLC, wit hin thirty
(30) days from the date of purchase. The WARRANTY REGISTRATION is available either
in the Instruction Manual of every Product or at SKYFOOD’s website www.skyfood.us. The
End User must fill out the WARRANTY REGISTRATION form and send it to SKYFOOD
according to the instructions posted on the referred website. Failure to do so will VOID
the warranty.
For questions or assistance, do not return the product or accessories to the store, please
call Toll Free 1 -800-503-7534 for Customer Support, or visit the Customer Service section
of www.skyfood.us. For faster service please have the items name, serial number, and
proof of purchase for the operator to assist you.
SKYFOOD reserves the right to change the terms of its limited warranty at any time
without any prior notice. It also reserves the right to change the design and
specifications of its equipment or any related documentation at any time. The end
user is not entitled to upgrades or refunds resulting from these changes.
Updates
These Terms and Conditions were last updated on August 22th, 2011.
06
The following safety instructions are addressed to both the operator of the machine as well
as the person in charge of maintenance. The machine has to be delivered only in perfect
conditions of use by the Distributor to the user. The user shall operate the machine only after
being well acquainted with the safety procedures described in the present manual. READ
THIS MANUAL WITHATTENTION.
4.1 Basic Operation Practices
4.1.1 Dangerous parts
Some parts of the electric devices are connected to high voltage points. These parts when
touched may cause severe electrical shocks or even be fatal.
Never touch commands such as buttons, switches and knobs with wet hands, wet clothes
and/or shoes. By not following these instructions operator could be exposed to severe
electrical shocks or even to a fatal situation.
4.1.2 Warnings
The operator has to be well familiar with the position of ON/OFF Switch to make sure the
Switch is easy to be reached when necessary. Before any kind of maintenance, physically
remove plug from the socket.
Provide space for a comfortable operation thus avoiding accidents.
Water or oil spilled on the floor will turn it slippery and dangerous. Make sure the floor is
clean and dry.
Before giving any manual command (switch, buttons, turn keys or lever) be sure the
command is the correct one. Check this manual for further details if necessary.
Never use a manual command (switch, buttons, lever) unadvisedly.
If any work is to be made by two or more persons, coordination signs will have to be given for
each operation step. Every step of the operation shall be taken only if a sign has been made
and responded.
4. General Safety Practices
IMPORTANT
If any item from the GENERAL SAFETY NOTIONS section is not applicable to
your product, please disregard it.
SKYFOOD EQUIPMENT LLC - SERVICE
For questions or assistance with products FLEETWOOD by SKYMSEN and SKYMSEN,
call SKYFOOD EQUIPMENT Toll Free : 1-800-503-7534, 24h Customer support, or visit
the Customer Service section of www.skyfood.us.
SKYFOOD’S LIMITED WARRANTY
Unless otherwise specified,new FLEETWOOD by SKYMSEN and SKYMSEN products,
excluding accessories, sold by SKYFOOD EQUIPMENT, LLC. (“SKYFOOD”), for use only
in the continental United States (collectively, “Products” or singularly, “Product”), are
warranted to be free from defects in materials and workmanship for a period of one (1)
year from the date of purchase by the original purchaser/user (“End User”). Several new
products and accessories may be warranted for a period other than one (1) year while
others may be subject to travel limitations, as specified on the products Instruction Manual.
Proof of purchase must be presented; if not this warranty will be VOID. No warranty is
given or implied to a subsequent transferee or any other third party. This warranty is
expressly conditional upon SKYFOOD being notified of any defects in materials or
workmanship within five (5) days of its occurrence, within the warranted time period. If a
notice of a claim under this warranty is timely made by the End User, SKYFOOD or a
SKYFOOD’s designated service company (“Service Company”), will repair or replace the
Product, at SKYFOOD’s discretion, subject to the additional conditions hereinafter
described.
This warranty shall not apply if damage occurs from improper installation or maintenance
performed by an unauthorized service company (“Service Company”), wrong voltage, nor
to the extent that Products or parts have been used other than in conformance with
operating and maintenance instructions, subjected to misuse or abuse or damaged by
accident, acts of God, abnormal use, stress or any other matter unrelated to SKYFOOD,
and beyond its reasonable control. This warranty does NOT cover service labor and
travel to perform adjustments on products and/or accessories. In addition to wear and
tear of certain items, such as, but not limited to; glass parts, blades, stones, chopper
cutting knives, plates, slicing knives, cutting disc, gaskets, oil changes, sealing tape, heat
seal wires, worm gears, self-lubricating bushings, carbon brushes for electric motors, and
other parts expendable by nature and that need to be replaced frequently. Electrical
components are subject to natural wear and tear, and are NOT covered by this
warranty. THIS WARRANTY EXCLUDES ALL ORAL, STATUTORY, EXPRESS OR
IMPLIED WARRANTIES WHICH MAY BE APPLICABLE TO SKYFOOD, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY AND
FITNESS FOR PARTICULAR PURPOSE. Under no circumstances shall SKYFOOD be
liable for loss of use, revenue or profit or for incidental or consequential damages.
SKYFOOD shall under no circumstances be liable for any loss, damage, concealed
damage, expense or delay of goods for any reason when said goods are in the custody,
possession or control of third parties selected by SKYFOOD to forward, enter, clear,
transport, or render other services with respect to such goods. The sole and exclusive
remedy for breach of any warranty is limited to the remedies provided in the paragraph
above.
All products held at non-commercial facilities or domiciles, must be taken or shipped,
shipping charges prepaid, either to SKYFOOD's facility or a SKYFOOD's designated
07
4.1.3Advices
In case of power shortage, immediately turn the machine OFF.
Use recommended or equivalent lubricants, oils or greases.
Avoid mechanical shocks as they may cause failures or malfunction.
Avoid penetration of water, dirt or dust into mechanical or electrical components of the
machine.
DO NOT modify original characteristics of the machine.
DO NOT remove, tear off or maculate any labels stuck on the machine. If any label has
been removed or is no longer legible, contact your nearest dealer for replacement.
READ CAREFULLY AND WITH ATTENTION THE SAFETY OR OPERATION
INSTRUCTIONS LABELS DISPLAYED ON THE MACHINE, AS WELL AS THE
INSTRUCTION MANUAL AND THE TECHNICAL CHARACTERISTICS WRITTEN
INSIDE.
4.2 Safety Procedures and Notes Before Switching Machine ON
IMPORTANT
Carefully read ALL INSTRUCTIONS of this manual before turning the machine ON.
Be sure to be familiar with the instructions and that you have well understood all
information contained in this manual. If you have any question contact your
supervisor or your nearest Dealer.
4.2.1 Danger
An electric cable or electric wire with damaged jacket or bad insulation could cause
electrical shocks as well as electrical leak. Before use, check conditions of all wires and
cables.
4.2.2Advices
Be sure ALL INSTRUCTIONS in this manual have been thoroughly understood. Every
function and operational procedure has to be very clear to the operator. Contact your
nearest Dealer for further questions.
Any manual command (switch, button or lever) shall be given only after being sure it is the
correct one.
20
Tabla - 02
Problemas Causas Soluções
Olor a quemado o humo.
Ruidos anormales
La maquina liga pero
demora en girar la Olla No.
05 (Fig.01).
L a m a q u i n a p á r a
durante la operación
Problema en el motor o en
los circuitos eléctricos
Falla del rodamiento
Falla del capacitor de
partida del motor.
Mala tensión de las correas
Llame el asistente técnico.
Llame el asistente técnico.
Llame el asistente técnico.
Llame el asistente técnico.
Falta de energía eléctrica
Mala tensión de las
correas
Falla de la llave
Liga/desliga.
Verifique si el enchufe está
en su soquete, o si hay
energía.
Llame el asistente técnico.
Llame el asistente técnico.
5.2 Diagrama Electrico
Llave liga/desliga
Llave selectora de voltaje
110/220 Volts
Motor
Llave de Seguridad
de la Olla
Table des matières
Langues :
Autres manuels Skymsen Mixer
Skymsen
Skymsen Fleetwood BPS-06 Manuel utilisateur
Skymsen
Skymsen BPS-12E-N Manuel utilisateur
Skymsen
Skymsen SPM20 Manuel utilisateur
Skymsen
Skymsen MMS-50I-N Manuel utilisateur
Skymsen
Skymsen BMS Manuel utilisateur
Skymsen
Skymsen M20A Manuel utilisateur
Skymsen
Skymsen Fleetwood BPS-06 Manuel utilisateur
Skymsen
Skymsen BPS-05 Manuel utilisateur
Skymsen
Skymsen BPC-12 Manuel utilisateur
Skymsen
Skymsen BPS-30CE Manuel utilisateur
