SKYDANCE C1 Manuel utilisateur

Operation temperature

Case temperature (Max.)

Environment

IP20

IP rating

Dimming data

Dimming range

RF 2.4GHz + Push Dim

30m

4096 levels

0 -100%

Technical Parameters

Output power 1.05W-16.1W (350mA)

Output voltage 3-46VDC

Output current 1CH,350mA/700mA

Input and Output

Input voltage 12-48VDC

Safety and EMC

EMC standard (EMC) EN301 489,EN 62479

Radio Equipment(RED) EN300 328

Certification CE,EMC,LVD,RED

EN60950

Safety standard(LVD)

Output type Constant current

Warranty and Protection

5 years

Protection Reverse Polarity

Short circuit

Warranty

Input signal

Control distance

Dimming level

Ta: -30

C ~ +55

T c: +85

RED

Model No.: C1(350mA) / C1(700mA)

Single Color LED Controller

1 Channel/Step-less dimming/Wireless remote control/Auto-transmitting/Synchronize/Push Dim

Features

● Match with Skydance’s 2.4G dimming remote control,

one RF controller accept up to 10 remote control.

● Auto-transmitting function: Controller automaticly transmit

signal to another controller with 30m control distance.

● Synchronize on multiple number of controllers.

● Connect with external push switch to achieve on/off and

dimming function.

Dimming curve Logarithmic

2.1W-32.2W (700mA)

User Manual Ver 1.0.2 Page 1

www.iskydance.com

Push Switch

LED Controller

AC100-240V

Power Supply

12-48VDC

Constant Voltage

Match Remote Control (two match ways)

Use the controller’s Match key

Match:

Short press match key, immediately press on/off

key (single zone remote) or zone key (multiple zone

remote) of the remote.

Use Power Restart

Match:

Switch off the power, then switch on power again,

immediately short press on/off key (single zone remote)

or zone key (multiple zone remote) 3 times on the remote.

The light blinks 3 times means match is successful.

Delete:

Switch off the power, then switch on power again,

immediately short press on/off key (single zone remote)

or zone key (multiple zone remote) 5 times on the remote.

The light blinks 5 times means all matched remotes were

deleted.

Delete:

Press and hold match key for 5s to delete all match,

The light blinks 5 times means all matched remotes

were deleted.

Mechanical Structures and Installations

LED output -

LED output +

Power input -

Power input +

LED indicator

Match key

Push switch com

Push switch in

Installation rack

End user can choose the suitable match/delete ways. Two options are offered for selection:

1.The controller could auto check and output a proper voltage according to its LED quantities.

2.The controller works on buck mode, the voltage of power supply should be greater than the total voltage of the seried LEDs.

Drives 1-13pcs 1W LED

97mm

33mm

18mm

C1 Single Color LED Controller

User Manual Ver 1.0.2 Page 2

www.iskydance.com

Push Dim Function

● Short press:

Turn on or off light.

● Long press (1-6s):

Press and hold to step-less dimming,

With every other long press, the light level goes to the opposite direction.

● Dimming memory:

Light returns to the previous dimming level when switched off and on again, even at power failure.

● Synchronization:

If more than one controller are connected to the same push switch, do a long press for more than 10s,

then the system is synchronized and all lights in the group dim up to 100%.

This means there is no need for any additional synchrony wire in larger installations.

We recommend the number of controllers connected to a push switch does not exceed 25 pieces,

The maximum length of the wires from push to controller should be no more than 20 meters.

The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching

(momentary) wall switchs.

Application notes

1. All the receivers in the same zone.

2. Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.

Zone 1 Zone 2 Zone 3

RF remote

30m 30m

Zone 4

RF remote

Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m,

as long as there is a receiver within 30m, the remote control distance can be limitless.

Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled

by the same remote.

Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.

Strong signal sources such as WiFi routers and microwave ovens will affect the range.

We recommend for indoor applications that receiver placements should be no further apart than15m.

30m

30m30m

C1 Single Color LED Controller

User Manual Ver 1.0.2 Page 3

www.iskydance.com

C1 Single Color LED Controller

Malfunctions Analysis & Troubleshooting

Malfunctions

Causes Troubleshooting

No response

from the remote

1. The battery has no power.

2. Beyond controllable distance.

3. The controller did not match the remote.

1. Replace battery.

2. Reduce remote distance.

3. Re-match the remote.

1. No power.

2. Wrong connection or insecure.

1. Check the power.

2. Check the connection.

No light

100

PWM duty(%)

50 60 70 80 90 100

Brightness(%)

10 20 30 40

Gamma=1.6

Dimming Curve

User Manual Ver 1.0.2 Page 4

www.iskydance.com

Autres manuels SKYDANCE Contrôleurs

SKYDANCE

SKYDANCE V1 Manuel utilisateur

SKYDANCE

SKYDANCE SC + R9 Manuel utilisateur

SKYDANCE

SKYDANCE VD3 Manuel utilisateur

SKYDANCE

SKYDANCE V1-T Manuel utilisateur

SKYDANCE

SKYDANCE KS Manuel utilisateur

SKYDANCE

SKYDANCE XC Manuel utilisateur

SKYDANCE

SKYDANCE T1 Manuel utilisateur

SKYDANCE

SKYDANCE VP Manuel utilisateur

SKYDANCE

SKYDANCE SC + R9 Manuel utilisateur

SKYDANCE

SKYDANCE R10 Manuel utilisateur

SKYDANCE

SKYDANCE WT1 Manuel utilisateur

SKYDANCE

SKYDANCE V4-U Manuel utilisateur

SKYDANCE

SKYDANCE DSA Manuel utilisateur

SKYDANCE

SKYDANCE T14 Manuel utilisateur

SKYDANCE

SKYDANCE T13 Manuel utilisateur

SKYDANCE

SKYDANCE R11 Manuel utilisateur

SKYDANCE

SKYDANCE V1-L Manuel utilisateur

SKYDANCE

SKYDANCE R6 Manuel utilisateur

SKYDANCE

SKYDANCE V4-WPS Manuel utilisateur

SKYDANCE

SKYDANCE ES32-V Manuel utilisateur

SKYDANCE

SKYDANCE RGBW Manuel utilisateur

SKYDANCE

SKYDANCE RT5 Manuel utilisateur

SKYDANCE

SKYDANCE T15 Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur