Skidee Y200 Manuel utilisateur

PRODUCT MANUAL - Y200
Or watch the video on YouTube.com


Thank you for choosing our scooter. You can rest assured that you have acquired a high
quality product. And also we oer you an excellent after-sales service.
Before you convince yourself of the unique driving experience oered by your new scooter,
please read the attached instructions carefully. Please keep these instructions in a safe
place so that you can refer to them in the future.
Have fun with your new scooter!
GENERAL
Dear customer,

IMPORTANT: Before you allow your child to use our scooter, please read the operating safety instructions
carefully, and ensure that the steering rod is fully engaged and all the screws are tight. Also ensure that the
wheels have been correctly secured, and that they show no signs of wear.
IMPORTANT: Undoing the axle screws several times will reduce the eect of the screw securing product.This
means that the screws may come loose by themselves. You should therefore always check the screws regu-
larly and use the scooter after tightening the screws.
WARNING: Adult required, this product contains small parts while unassembled.
WARNING: The toy needs to be used with caution, since skill is required to avoid falls or collisions causing
injury to the user or third parties.
WARNING: The wearing of helmets, protective equipment for elbows, knees, wrists and palms as well as
shoes with at rubber soles is recommended.
WARNING: Close quick-action lock securely and ensure that it is correctly positioned.
WARNING: Do not ride down slopes.
WARNING: Child must be supervised.
WARNING: Brake can become hot.
WARNING: Maximum permissible weight: 130 Lb (60 kg).
Important Instructions and Warnings

Operating Safety Instructions
Child should practice rst to gain control of the scooter. We recommend that you practice your scooter on a
trac-free car park or on open asphalt play areas.
Ensure that your child always wears a helmet, and wrist, elbow and knee pads, as well as shoes with rubber
soles.
Ensure that your child does not attempt any experiments or risky maneuvers with it. Riding style should always
be adjusted to the personal skill of the rider.
Ensure that your child does not travel at speeds exceeding 10 mph (5 km/h).
Ensure that your child does not ride on roads, paths or other places with motor vehicle trac.
Ensure that your child does not make any modications or alterations to your scooter which would put your
safety at risk.If you do, the guarantee is expired.
Ensure that your child does not ride the scooter in the dark or at night. Only one child may ride on the scooter
at any one time.
Ensure that your child does not ride down any steep hills. The brake is not designed to decelerate from high
downhill speeds. Always look ahead while you ride so that you can quickly come to a stop at any time.The brake
can get hot with prolonged use. Avoid skin contact.
The brake pad becomes hot when it is used. Make especially sure that your child does not keep the brake on for
a long period of time. Explain to your child that direct skin contact may cause burns.
The scooter must not be used on wet, oil, sandy, icy, rough or uneven surfaces. Never use the scooter in wet
conditions.

Kerbstones and cobblestone pavements aect your balance. It is better to get o. Even lowered kerbstones can
knock you o balance.
Watch out for longitudinal and transverse grooves in the asphalt! The narrow wheels may get stuck in tram
rails and manhole covers for example, and lock up.
Some metal parts may corrode after a certain time, especially when used near the sea of left outdoors to often.
The scooter may not be used on public roads. When Riding on pedestrian walking areas, keep to the correct
side according to the rules of the road as much as possible. Watch out for Pedestrians, Wheelchair users,
Cyclists, Rollerblade and Animals. Always observe trac rules and regulations.
Load capacity is up to 130 Lb (60 kg) body weight for the scooter.
Scooter (Model No: Y200) for 2+ year
Always take care not to risk injuring ngers when folding and unfolding scooter.
Explain to your child the risks of using the scooter as how to use it. Supervise your child while they are using
the scooter.
HAVE FUN WITH YOUR NEW SCOOTER!

Hold on to the ends of the T-Bar or Ring Bar with your hand. You steer the board through the slightest of weight
displacements. To Start moving, stand with one leg (the foot approx.at 45 ° angle to the direction of travel) on the
board and push yourself o using the other leg. If you stand with your right leg on the board, you can use left leg
to accelerate. If you stand with your left leg on the board, you can use right leg to accelerate. After gaining
momentum you stand with your legs apart on the board, so that both feet are approx.at 45 ° angle to the direction
of travel. Enjoy your scooter!
Play Instructions
The brake is a friction brake and only designed for reduction of speed
on at surfaces-avoid going downhill. Brake at low speed by gently
pushing your foot, resting far back on the board, against the back
wheel plate.You need to push harder if you are traveling faster. Be
careful however:if you push the brake too hard and slow down too
abruptly, you risk falling.It is best to practise braking at walking speed.
Brake
Attention:The brake and protection plate can get very hot.

Model No: Y200
Age: 2+year
Strengthen protection of chassis
Lower Mudguard
Folds and unfolds scooter
Reinforced GFK30
Stronger/Loading up to 130 Lb (60kgs)
Chassis
Lean to steer Mechanism
More stable, More exible Front PU Wheel
Non-Marking/Flash
Red Push Button
T-Bar Adjust Ball
Use Reinforced GFK30 material instead of ALU
Stronger Plastic Collar Clamp
Thicken ALU Tube
Handlebar\Steering Rod
26 inches to 33 inches
Adjustable T-Bar
Durable/Eco-friendly TPR
Handle Grip
Wider/More comfortable
Non-Slip Deck
13 inches to 13.8 inches
Adjustable Seat
Colorful Brake With Stainless Steel
Rear Brake
2PCS
Non-Marking/Flash
Rear PU Wheel


Finish the scooter Assembly and
Height Adjustable.
Height: 33 inches
Height: 29.5 inches
Height: 26.5 inches
Assemlbly nished.
Press Red Push Button (1), Direct the
Convex (3) to the Localization gap (5), Insert
the Handlebar (2) in Scooter Hole (4), Until
you hear "click" sound to ensure Handlebar
(2) securely locked in Scooter Body.
Pull the Red Push Button (1) to ensure
Handlebar (2) securely locked in
Scooter Body.
3
45
12
Red Push Button (1), Handlebar (2),
Convex (3).
Scooter Hole (4).
Table des matières
Autres manuels Skidee Scooter
Manuels Scooter populaires d'autres marques

First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Manuel utilisateur

Carrera
Carrera impel Manuel utilisateur

Afikim
Afikim Superlight SL-3 Manuel utilisateur

CareCo
CareCo ZOOM Manuel utilisateur

Douglas
Douglas Vespa G.S. Manuel utilisateur

Gazelle
Gazelle with BOSCH System Manuel utilisateur













