Sitrex RT/5200 Guide de configuration rapide

ASSEMBLY, USE AND MAINTENANCE

SPARE PARTS LIST

RT/5200 – RT/5200-H

POINT HITCH

ROTARY TEDDER

10/06

WARRANTY

On delivery, check that the machine has not been damaged during transport and that all the

attachments are present. Claims must be made in writing to the agent within 8 days of receipt.

The manufacturer warrants new machinery at the time of delivery to the original purchaser to be

free from defects in material and workmanship if properly set up and operated in accordance with

this Operator’s Manual.

The manufacturer undertakes to repair or replace free of charge any defective part which should be

returned by the purchaser (freight prepaid) and found to be defective by inspection authorized by

the manufacturer during the warranty period.

This warranty will be valid for 12 (twelve) months from the delivery of goods to the original

purchaser .

In case the customer is not in a position to return the defective part to the manufacturer , the

manufacturer cannot be held responsible for any cost due for repair or replacement of any part of

the machine , he will only supply the part(s) required for the repair and/or replacement.

The warranty is null and void when it is evident that the machine has been improperly used or

however repaired without authorization.

The manufacturer undertakes no responsibility for any obligation or agreement reached by any

employers, agents or dealers, which are not in compliance whit the above warranty . The

manufacturer cannot be held responsible for the consequent damages. This warranty substitutes any

other warranty , express or implied , and any other manufacturer’s obligation.

CHAPTHER

1) GUIDE TO THE SIGNS

2) General summary of safety and accident-prevention instructions

3) PRODUCT IDENTIFICATION

4) DELIVERY AND ASSEMBLY

5) ADJUSTMENT, PREPARATION AND USE

6) MAINTENANCE

7) SPARE PARTS LIST

1) GUIDE TO THE SIGNS AND SYMBOLS USED ON THE

MACHINE

IMPORTANT

These signs and symbols give information to the operator on how to make the best use of the

machine so as to prolong life, avoid damage, optimise work and, above all, to avoid injury to the

operator and anyone within range of the machine.

WARNING SIGNS

1) Before beginning operations, read the instruction manual

carefully.

2) Before doing any maintenance or repair work, stop the

machine at a suitable spot. Turn off the tractor motor, apply

the brake, remove the key from the ignition and consult this

manual.

3) This is a warning to use proper accident protection when

carrying out maintenance and repairs

DANGER SIGNS

4) Risk of possible ejection of blunt objects. Keep a safe

distance from the machine

5) Indicates that anyone coming within range of the moving tine

arms will be seriously injured.

Keep a safe distance from the machine.

6) Indicates that there is a risk of crushing your hands. Keep

your distance.

7) Indicates danger caused by accidental fall of suspended arms.

Keep safe distance.

8) Indicates that it is dangerous to touch the cardan (P.T.O.)

shaft.

For all the other information regarding the cardan shaft, see the

use and maintenance booklet specifically for the cardan shaft

which, together with this manual, makes up the documentation

on safety, use and maintenance of the machine.

INDICATION SIGNS

9) Indicates a greasing point.

10) Shows the direction of rotation of the power takeoff and the maximum

number revolutions.

11) Indicates position of the tines on the rotors and their direction of

rotation.

3) PRODUCT IDENTIFICATION

MAIN PARTS

1) 3

POINT HITCH, DRAWBAR AND

PARKING STAND

2) MACHINE BODY

3) RH AND LH LATERAL ROTORS

4) RH, CENTER AND LH GUARD

5) RH AND LH TINE ARM

6) WHEEL ASSEMBLY

7) CARDAN SHAFT

8) HYDRAULIC KIT (only for RT/5200-H)

9) SHOCK ABSORBER

10) IDENTIFICATION PLATE

TECHNICAL DATA

All data are indicative. Sitrex reserves the right to change them without advance notice.

SPECIFICATIONS RT/5200

Manual fold RT/5200-H

Hydraulic fold

Number of rotors 4 4

Tine arms per rotor 6 6

Working width 17' ( 5,20 m) 17' ( 5,20 m)

Transport width 10' 3'' (3,15 m) 10' 3'' (3,15 m)

Weight 1075 lbs (490 kg) 1090 lbs (495 kg)

Tire 16x6.50-8 16x6.50-8

PTO Tractor requirement 25 hp (18 kw) 25 hp (18 kw)

PTO slip clutch Standard Standard

Operating speed 10 mph (16 Km/h) 10 mph (16 Km/h)

4) DELIVERY AND ASSEMBLY

Checking the machine on delivery

All parts are carefully checked before dispatch or delivery.

On receiving the machine, ensure that it has not been damaged during transport. If damage has

occurred, contact the dealer concerned.

Details of packing are given below.

UNPACKING THE MACHINE

Lift the machine using a forklift truck, crane or other suitable equipment of sufficient capacity after

first checking the weight of the configurations in the table given below.

Check the stability and positioning of the load on the forklift truck forks or crane hook.

Keep the load as low as possible during movement for maximum stability and to ensure that the

operator has maximum visibility.

If a forklift truck is used, ensure that the forks are positioned as wide apart as possible.

MACHINE WEIGHT PACKING KG/LBS WEIGHT KG/LBS

RT/5200 555/1220 490/1075

RT/5200-H 560/1235 495/1090

NOTE:

1) The packing consists mainly of wood, which should be disposed of according to the laws

in force in the country where the machine is used.

The plastic film should also be disposed of according to the laws in force in the country

where the machine is used.

2) When storing, it is permissible to stack 2-3 crates on top of each other. Make sure that

they are perfectly aligned cortically.

3) In the event of further transport, ensure that the machine when on the transporting

vehicle.

FORKLIFT

LIFTING

POINTS

ASSEMBLY INSTRUCTIONS

Assembly is highly dangerous and must be carried out in strict accordance with the

following instructions. We recommend that qualified personnel perform assembly.

We also recommend that assembly be carried out on a flat, solid surface, in an open

area with no people (particularly children) nearby who could be severely injured if

they were to touch or move any parts of the machine.

Assemblers must provide suitable lifting mechanisms and supports for stabilizing the

partially assembled units, so as to prevent them from falling and causing damage or

injury. The steps for assembly are illustrated in following. Depending on the

experience of the assemblers and the tools available, it is not necessary that the

instructions be followed in the exact order given here, but the safety precautions

described above must always be followed carefully and scrupulously.

ASSEMBLY SEQUENCE:

SUPPORTS AND WHEELS ASSEMBLY

Mount the grease nipples 1 onto their seats on the hubs 2-3 (RH - LH).

2) Remove the spring pins 8 from the wheel supports 4-5 (RH-LH) and remove only

the upper shims 7.

3) Mount the wheel supports 4-5 (RH - LH) to their respective hubs 2-3 (RH - LH).

To do this, you must pull back lever “A” and then insert the upper pins of the wheel

supports 4-5 into the seats provided for them on the hubs 3-4. Then place the upper

shims 7 on the parts of wheel support pins 4-5 that protrudes from the seats of the

hubs 2-3 and secure the whole assembly in place with the spring pins 8. Position the

pins “A” on the central seats “B” provided for them on the hubs 2-3.

4) Attach the large hay guards 9 to the wheel supports 4-5, followed by the wheels

10, the small hay guards 11 and the washers 12 and fasten with the nuts 13.

4) Attach the large hay guards 9 to wheel supports 4-5, followed by wheels 10, small

hay guards 11, washers 12 and fasten with nuts 13.

In this steps, you will use:

Item 1: 4 grease nipple M6

Item 6: 4 shims ø30.5x39.8x0.5 (or 1) (ø1.2”x1.57”x0.02” (or 0.04”)

Item 7: 4 shims ø30.5x39.8x0.5 (or 1) (ø1.2”x1.57”x0.02” (or 0.04”)

Item 8: 4 spring pins ø6 x 45 (0.24” x 1.77”)

Item 12: 4 flat washers ø17 (0.67”)

Item 13: 4 nuts M16

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels sitrex Matériel agricole

sitrex

sitrex TR/6-S Guide de configuration rapide

sitrex

sitrex QRX 12 Guide de configuration rapide

sitrex

sitrex MX 8 Guide de configuration rapide

sitrex

sitrex BR 2030/6 Manuel utilisateur

sitrex

sitrex HM 360 Guide de configuration rapide

sitrex

sitrex M 60 MINI/S Manuel utilisateur

sitrex

sitrex SB150 Guide de configuration rapide

sitrex

sitrex TR/11 Guide de configuration rapide

sitrex

sitrex Action 120 Manuel utilisateur

sitrex

sitrex SR 320/8 H Mode d’emploi

sitrex

sitrex SM 3600 Guide de configuration rapide

sitrex

sitrex SR 420/11 H Mode d’emploi

sitrex

sitrex MKE/14-16 Manuel utilisateur

sitrex

sitrex DM/6 Mode d’emploi

sitrex

sitrex GS 160 Guide de l'utilisateur

sitrex

sitrex RP/4 Mode d’emploi

sitrex

sitrex BR 2030/6 Manuel utilisateur

sitrex

sitrex DM/4 Mode d’emploi

sitrex

sitrex SM/230 Instructions de montage

sitrex

sitrex MX 12 Guide de configuration rapide

sitrex

sitrex MK14 MY15 Manuel utilisateur

sitrex

sitrex RT/5800-H Guide de configuration rapide

sitrex

sitrex SR 320/8 Guide de l'utilisateur

sitrex

sitrex 250.799 Manuel utilisateur

Manuels Matériel agricole populaires d'autres marques

GSi

GSi PNEG-2314 Manuel utilisateur

Checchi & Magli

Checchi & Magli TEXDRIVE Manuel utilisateur

Amazone

Amazone Cenius 4003-2TX Manuel utilisateur

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manuel utilisateur

Cima

Cima BLITZ Instructions d'utilisation et d'entretien

Amazone

Amazone CombiDisc 3000 Instructions d'installation

HE-VA

HE-VA Disc-Roller XL Contour Manuel utilisateur

AGT

AGT AGT-SSFM Manuel utilisateur

Milestone

Milestone 72-84 Manuel utilisateur

KUHN

KUHN Hector 3000 Manuel utilisateur

Krone

Krone X-Disc 6200 Manuel utilisateur

Eliet

Eliet DZC450 Manuel utilisateur

Taarup

Taarup BIO+ B4000 Manuel utilisateur

Garland

Garland SHAKER 310 DPG Manuel utilisateur

stable comfort

stable comfort StableWall System Manuel utilisateur

Raven

Raven AccuBoom Manuel utilisateur

International

International 710 Manuel utilisateur

Ashland

Ashland HDW-3217-14 Manuel utilisateur

sitrex RT/5200 Guide de configuration rapide

Manuels Matériel agricole populaires d'autres marques