SISTEM AIR SENSE Manuel utilisateur

sistemair.com

TECHNICAL MANUAL

V 1.0.1

CENTRAL VACUUM SYSTEMS ByTecnoplus s.r.l.

SENSE retractable tube system

• Type: central vacuum system domestic sector

• Revision 1.0.1

SENSE

Instruction manual

28/08/2023 Rev:1.0.1

INDEX

1 CHOICE OF VACUUM UNIT 5

2 MULTI SENSE AND MONO SENSE SYSTEM 5

3 TECHNICAL FEATURES 5

4 WARNINGS FOR INSTALLING THE SENSE SYSTEM 6

4.1 Installation height 6

4.2 Installation on plasterboard 7

4.3 IWall installation 8

5 PIPE NETWORK INSTALLATION WARNINGS 9

6 ELECTRICAL CONNECTION 12

6.1 Standard electrical connection 12

6.2 Electrical connection with wireless on-off system 13

7 COVER INSTALLATION 14

8 OPERATION 15

8.1 Multi Sense switch-on 15

8.2 Multi Sense switch-off 16

8.3 Mono Sense switch-on 17

8.4 Mono Sense switch-off 18

Instruction manual

428/08/2023 Rev:1.0.1

ATTENTION

This manual is designed for an installer who has the appropriate training and experience to carry out the

installation of a central vacuum system.

It is essential that only Sistem Air brand components are used for the installation

The installer is responsible for carrying out the work in accordance with local laws.

28/08/2023 Rev:1.0.1 5

English

51 mm

85 mm

144 mm

262 mm

180 mm

14 0 mm

40 mm40 mm40 mm

126 mm

80 mm

115 mm

1 - CHOICE OF VACUUM UNIT

It is important to consider that the length of the pipe reduces the air ﬂow and the recovery efﬁciency of

the pipe within the pipe network. Therefore, to compensate for this, it is necessary to choose a more

powerful vacuum unit than a standard system.

2 - MULTI SENSE AND MONO SENSE SYSTEM

The use of the Multi Sense counter-socket is intended for installations with several Sense socket points

or mixed installations, as a system is designed for maintaining the vacuum of the installation in the event

of the socket point being unused.

If, on the other hand, only one outlet is to be installed, it is possible to use the Mono Sense vacuum inlet,

a system that is simpler in its use.

3 - TECHNICAL FEATURES

Instruction manual

628/08/2023 Rev:1.0.1

4 - WARNINGS FOR INSTALLING THE SENSE COUNTER SOCKET

4.1 - INSTALLATION HEIGHT

If the counter socket is oriented downwards, with the inlet to connect to the pipe network downwards, it

is recommended not to install the counter socket at a height of less than 40 cm.

If the counter socket is oriented upwards, with the inlet to connect to the pipe network upwards, it is

recommended not to install the counter socket at a height of less than 90 cm.

Inquadraperl’installazione

Fitsforinstallation

Cadrespourl'installation

Rahmenfürdie installation

Enfocaparala instalación

MURAREAFILO INTONACO

FLUSHWALL-MOUNTED

INSTALLÉEÀLIMITE DU PLÂTRE

BÜNDIGMITDER WAND EINGEBAUT

INSTALADOARAS DE PARED

40 cm minimum height

Inquadraperl’installazione

Fitsforinstallation

Cadrespourl'installation

Rahmenfürdie installation

Enfocaparala instalación

MURAREAFILO INTONACO

FLUSHWALL-MOUNTED

INSTALLÉEÀLIMITE DU PLÂTRE

BÜNDIGMITDER WAND EINGEBAUT

INSTALADOARAS DE PARED

90 cm minimum height

Pipe network inlet

28/08/2023 Rev:1.0.1 7

English

4.2 - INSTALLATION ON PLASTERBOARD

Fasten the counter socket to the wall upright

Make sure it is aligned (ﬁgure 1) and has free space

behind the socket.

It is recommended to add a wall upright (ﬁgure 2)

on the other side of the counter socket to secure

it better.

Install the PVC pipe (ﬁgure 3). Glue the pipe to the

counter socket ﬁtting, making sure that it ﬁts tightly

inside the ﬁtting.

Inquadraper l’installazione

Fitsfor installation

Cadrespour l'installation

Rahmenfür die installation

Enfocapara la instalación

MURAREA FILO INTONACO

FLUSHWALL-MOUNTED

INSTALLÉEÀ LIMITE DU PLÂTRE

BÜNDIGMIT DER WAND EINGEBAUT

INSTALADOA RAS DE PARED

Inquadraper l’installazione

Fitsfor installation

Cadrespour l'installation

Rahmenfür die installation

Enfocapara la instalación

MURAREA FILO INTONACO

FLUSHWALL-MOUNTED

INSTALLÉEÀ LIMITE DU PLÂTRE

BÜNDIGMIT DER WAND EINGEBAUT

INSTALADOA RAS DE PARED

Inquadraperl’installazione

Fitsforinstallation

Cadrespourl'installation

Rahmenfürdieinstallation

Enfocaparalainstalación

MURAREA FILOINTONACO

FLUSHWALL-MOUNTED

INSTALLÉEÀ LIMITEDU PLÂTRE

BÜNDIGMIT DERWAND EINGEBAUT

INSTALADOA RASDEPARED

Instruction manual

828/08/2023 Rev:1.0.1

Inquadraper l’installazione

Fitsfor installation

Cadrespour l'installation

Rahmenfür die installation

Enfocapara la instalación

MURAREA FILO INTONACO

FLUSHWALL-MOUNTED

INSTALLÉEÀ LIMITE DU PLÂTRE

BÜNDIGMIT DER WAND EINGEBAUT

INSTALADOA RAS DE PARED

4.3 - WALL INSTALLATION

Insert the back of the counter socket into the wall

(ﬁgure 4).

Once the pipe network has been connected and the

electrical connection made, embed the back of the

counter socket.

Ensure that the thickness of the plaster is level to

counter-socket (approx. 1 cm thick) on each side

(ﬁgure 5).

Inquadraper l’installazione

Fitsfor installation

Cadrespour l'installation

Rahmenfür die installation

Enfocapara la instalación

MURAREA FILO INTONACO

FLUSHWALL-MOUNTED

INSTALLÉEÀ LIMITE DU PLÂTRE

BÜNDIGMIT DER WAND EINGEBAUT

INSTALADOA RAS DE PARED

- ATTENTION -

DO NOT REMOVE THE MORTAR GUARD

DURING CONSTRUCTION TO PROTECT

COMPONENTS.

28/08/2023 Rev:1.0.1 9

English

5 - PIPE NETWORK INSTALLATION WARNINGS

The installation of the vacuum system with the retractable tube requires the use of a pipe network

and ﬁttings speciﬁcally for this type of system.

The section of pipe network, within which the hose will run, must have a diameter of

2”/ 51mm and its length should be equal to the length of the retractable tube, plus 10/15cm of excess.

Art. 3051.8 Art. 3051.7 Art. 3051.6

90° 45° 22,5°

Only speciﬁc ﬁttings (ﬁgure 1) for the Sense system can be used for the pipe network. All this is con-

tained in the Sense system installation kit Art. 7230.0 or sold separately.

Instruction manual

10 28/08/2023 Rev:1.0.1

Any lumps or excess glue could damage the hose covering, as it retracts into the pipe network.

To avoid this, ensure that the glue is applied to the male part of the ﬁtting and never to the female part

(ﬁgure 2).

Be sure to remove all plastic burrs after cutting the PVC pipe, which should be done with the appropriate

pipe cutting tool. Check carefully that the pipes inside are smooth, round and intact.

When installing the Ø 51 mm pipe network collars (ﬁgure 3), ensure that the tubes are not crushed,

altering the sliding of the hose inside them.

Upon completion of the installation, it is recommended to carry out a vacuum test to ensure that the

system is watertight.

Table des matières

Autres manuels SISTEM AIR Système d'aspiration centralisée

SISTEM AIR

SISTEM AIR TECNO R-evolution Manuel utilisateur

SISTEM AIR

SISTEM AIR FLISY 2 Mode d'emploi

SISTEM AIR

SISTEM AIR MINI TE Instructions d'installation et d'utilisation

SISTEM AIR

SISTEM AIR Revo Block Professional Series Manuel utilisateur

SISTEM AIR

SISTEM AIR Industrial Clean Basic Manuel utilisateur

SISTEM AIR

SISTEM AIR Wolly2 Mode d'emploi

SISTEM AIR

SISTEM AIR JOLLY Instructions d'installation et d'utilisation

SISTEM AIR

SISTEM AIR TECNO Style Manuel utilisateur

SISTEM AIR

SISTEM AIR speedy Manuel utilisateur

Manuels Système d'aspiration centralisée populaires d'autres marques

Panasonic

Panasonic MCH1000 - BUILT-IN VACUUM SYS Manuel utilisateur

NADAIR

NADAIR 700-AL-22 Manuel utilisateur

Husky

Husky TITAN Manuel utilisateur

Nederman

Nederman C-PAK 20-1500 C Manuel utilisateur

Aerus

Aerus CENTRA LUX E130L Manuel utilisateur

Axelair

Axelair ACX310 Manuel utilisateur

SEVERIN

SEVERIN FS 3610 Manuel utilisateur

Riccar

Riccar CI100 Manuel utilisateur

Husky

Husky Flair Manuel utilisateur

Disan

Disan ZSA 45/3 Manuel utilisateur

Drainvac

Drainvac Automatik Series Manuel utilisateur

Linear

Linear Central Vacuum Manuel de service

NuTone

NuTone CV353 Mode d'emploi

Mvac

Mvac M40 Manuel utilisateur

InterVac

InterVac H Manuel utilisateur

SACH

SACH INTEGRA VAC Manuel utilisateur

Cana-Vac

Cana-Vac MAYTAG Manuel utilisateur

InterVac

InterVac CS6 Manuel utilisateur