Sinope TH1500NP Manuel utilisateur

TH1500NP

Installation Guide

Double-Pole Thermostat

for Electric Heating

Setpoint temperature

Ambient temperature

Heating indicator

Make sure that the

breakers for your heating

system are off at the main

electrical panel.

Replace the cover

and lock.

Power up the

thermostat.

Unlock and lift the

thermostat cover.

INSTALL YOUR THERMOSTAT

YOUR TH1500NP THERMOSTAT

The installation of this thermostat must be

performed by a certified electrician and comply

with the national and local electrical codes and

regulations.

Warnings

* Improperly installed electrical wires could burn the wire connectors.

Make sure to firmly tighten the wire connectors for a

secure connection. A loose connection can be a fire

hazard.

To install wire connectors, you must:

Insert the two wires into the wire nut so that their

copper ends are parallel.

Turn the wire connector clockwise until there is strong tension.

Pull on the threads to make sure they are secure, leaving no

gaps between them. * If the threads seem to come loose,

repeat the process.

3/4"

Set

Use the provided connectors

to connect the load/line

wires located on the back

of the thermostat.

3Use the screws to

secure the

thermostat to the

electrical box.

Set

Red (Line)

Red (Load)

Black (Load)

Black (Line)

Operatlng voltage: 120/208/240/277 Vac, 50/60 Hz

Maximum load:

1800 W @ 120 V / 15 A

3120 W @ 208 V / 15 A

3600 W @ 240 V / 15 A

4155 W @ 277 V / 15 A

Setpoint range: 41 ˚F to 97 ˚F (5 ˚C to 36 ˚C)

Display range: 32 ˚F to 99 ˚F (0 ˚C to 50 ˚C)

Resolution: ±1 ˚F (±0.5 ˚C)

Storage: -4 ˚F to 122 ˚F (-20 ˚C to 50 ˚C)

Operation: 32 ˚F to 122 ˚F (0 ˚C to 50 ˚C)

Compatible with an electric heating system such as:

• Baseboard heater

• Convector

• Fan-forced convector

• Radiant ceiling heating

OFF MODE TECHNICAL SPECIFICATIONS

3-year limited warranty

SINOPÉ TECHNOLOGIES INC. warrants the components of their products against

defects in material and workmanship for a 3 year period from the date of purchase,

under normal use and service, when proof of purchase of such is provided to the

manufacturer. This warranty does not cover any transportation costs that may be

incurred by the consumer. Nor does it cover a product that has been improperly

installed, misused or accidentally damaged. The obligation of SINOPÉ

TECHNOLOGIES INC., under the terms of this warranty, will be to supply a new unit

and this releases the manufacturer from paying the installation costs or other

secondary charges linked to replacing the unit or the components.

For more information, visit our Website:

660-0735-0026-A

ADVANCED SETTINGS

Setpoint Min

Scale

Load

Temperature scale

°C or °F (Default: °F)

Load power

0 W to 4155 W

Minimum setpoint

41 °F to 97 °F – (Default: 41 °F)

To change the thermostat’s settings, you need to:

Get the setpoint to its minimum and hold the button for

10 seconds to access the menu.

Press the or button to change the setting.

Press the and buttons simultaneously to save and go to

the next parameter. Continue to press until the end of the list

to exit the menu.

Name Parameters & settings Display

Setpoint Max

Maximum setpoint

41 °F to 97 °F – (Default: 97°F)

Backlight

Backlight control

ON, OFF or BED – (Default: ON)

ON (backlight always active, will dim

according to ambient light)

OFF (will only turn on when a button

is pressed)

BED (bedroom mode - backlight will dim

according to ambient light and will turn

OFF below 20% of luminosity)

Hold for 10 sec.

To put the thermostat in OFF mode, hold the buttons and

for 10 seconds.

To exit the OFF mode, hold the buttons and for

10 seconds or raise/lower the setpoint.

Hold for 10 sec.

Set

Autres manuels pour TH1500NP

Autres manuels Sinope Thermostat

Sinope

Sinope TH1400ZB Manuel utilisateur

Sinope

Sinope TH1400NP Manuel utilisateur

Sinope

Sinope TH1123ZB-G2 Manuel utilisateur

Sinope

Sinope TH1123ZB Manuel utilisateur

Sinope

Sinope TH1310WF Manuel utilisateur

Sinope

Sinope TH1500NP Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Sinope

Sinope TH1500WF Manuel utilisateur

Sinope

Sinope TH1500ZB-C4 Manuel utilisateur

Sinope

Sinope TH1500WF Manuel utilisateur

Sinope

Sinope TH1134ZB Manuel utilisateur

Sinope

Sinope TH1120RF-3000 Manuel utilisateur

Sinope

Sinope TH1500ZB Manuel utilisateur

Sinope

Sinope TH1124NP Manuel utilisateur

Sinope

Sinope TH1300ZB-C4 Manuel utilisateur

Sinope

Sinope TH1400NP Manuel utilisateur

Sinope

Sinope TH1300NP Manuel utilisateur

Sinope

Sinope TH1123ZB-C4 Manuel utilisateur

Sinope

Sinope TH1310WF Manuel utilisateur

Sinope

Sinope TH1400RF Manuel utilisateur

Sinope

Sinope TH1400WF Manuel utilisateur

Sinope

Sinope TH1300ZB Manuel utilisateur

Sinope

Sinope TH1120-3000 Manuel utilisateur

Sinope

Sinope TH1134ZB-HC Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur

Honeywell

Honeywell T6811 Manuel utilisateur