Sinocam S-CMS-5041 Manuel utilisateur
www.szsinocam.com Professional Mobile DVR
1
Professional Multifunctional Car Mobile
DVR
USER MANUAL
V2.3
www.szsinocam.com Professional Mobile DVR
2
Tips about safety instruction & direction
！Attention:
Please read this Before installing and using please read the following
instruction before warning carefully.
installing and using. 1It contains electronic devices, please hold gently.
Keep in a safety 2 All installing and maintaining should be hold by
place for the future professionals.
reference. 3 Do not install in the place often eroding by rain
and other liquids.
4 The installation and all materials must bear the fuselage
weight.
5 Keep the fuselage away from the heat, dust and
high-intensity magnetic filed.
6 Do not put the heavy on the device, any sundries
around 50 cm.
7 Do not flushing the device directly when cleaning
the car.
8 Do not mixing the output batteries that not fit for the
device.
9 Do not insert your fingers and other objects into the gap when
it works.
10 Do not take the devices about without the professionals.
11 Do not change any modules when the host is charged.
12 When replace the module make sure the module is fastening in the
host tightly.
Introduction
The manual is about the features and specifications of one kind of car DVR, it is an integration of
“4 monitoring and recording ” “vehicle traveling data recorder” “wireless data transmission ”.In the
manual it describe the functions and considerations of the modules ,the connector signal
definitions in the back panel, the interface definition and user’s operations.
www.szsinocam.com Professional Mobile DVR
3
1. Appearance
Front view
Back View：：
www.szsinocam.com Professional Mobile DVR
4
1.1. Remote Controller
KEY
Function
Picture
Start button
To enter system settings.
【0－9】
【0－9】key：In the setting mode, 0-9 is used to select
the number of menu items. In playback mode, the key
1,2,3,4 to select single channel playback and the Key 5
for 4-channel playback
Return to the previous menu
Enter button: button for setting system parameter, selecting
and playing. When playback, this button can overlay all
kinds of information data (speed, GPS, black box etc.)
▲， ， ，
up, down, left, right
left and right buttons are use for decreasing or increasing
volume
To display system info under monitoring mode
Rewind button. In play mode, press REW button to
select 2/4/8/16/,normal forward play
Play button
Forward button. In play mode, press this button to select
2/4/8/16/,normal backward play
Record button，Reserved
Pause button. Pause the normal playing.
Other
Reserved
www.szsinocam.com Professional Mobile DVR
5
1.2. Front panel
1.2.1. LED indicators
【PWR】Power LED：LED light means system has powered on
【ERR】Error promt：LED on－fault on SD cards; LED off –normal
【VLOS】video indicator: if bright- Video Loss
【REC】Recording indicator. LED on—normal
【GPS】GPS indicator：LED on---normal
【SD】SD indicator：When SD card records, SD light flicker
【RJ45】Network connector
HDD series：
【SD】SD indicator：LED on-SD card exists; When SD card records, SD light flicker
1.2.2. SD card
【RM】SD card remove keys: In system normal work status, SD cards can ONLY be safety
removed by press REMOVE keys about 3 seconds till SD led indicators off, and SD cards will
be reloaded automatically if the cards do not be removed within 15 seconds.
SD card：Slot for SD card
1.3. Back panel
www.szsinocam.com Professional Mobile DVR
6
●【POWER-IN】power port, red cable connect power positive, black cable connect power negative；
yellow line—ACC signal cable. If need timed record or igniting record, please connect ACC cable in
the car
●【ALM】alarm signals and other signals input interface
●【EX-VIDEO】audio input subsidiary interface (Video Rearview System)
●【V1-V4】camera and audio input interface;
●【AVOUT】monitor output port
2.GUI
2.1 Login
When password switch set “close”, after device startup, press【OK】key into the system
menu
When password switch set “open”, after device startup, press【OK】key, need input correct
device No., User name and password. Cursor will move to “Login”, press 【OK】key into
the system menu Factory Default Admin Password: 111111.
2.2 System Main Interface
The main interface will be displayed on the screen when you login successfully, it
contains
www.szsinocam.com Professional Mobile DVR
7
2.2.1 Recording setup
Record Parameters
【Record mode】AUTO / Timed / Alarm recording, press 【OK】to select.
【Resolution】D1/HD1/CIF, press【OK】to select.
【Audio input】AVIN1 / AVIN2,【OK】to select.
【‟Overwritten】Overwritten on/off switch. Press【OK】key to select.
【Channel】【Quality】【Frame rate】【Record】Channel recording parameters. Press
www.szsinocam.com Professional Mobile DVR
8
【OK】key to setup.
【TIME LIST】Recording time setup. Only available in timed recording mode. Press 【OK】
key to enter the following time list
:
Note:
Timing on/off is a cyclic course, has no priority.
2.3 Record replay
Use left/right/up/down to select “playback”, and press 【OK】key, enter the following
recording search menu
Note: System will highlight the valid record info.
Yellow-have recording.
www.szsinocam.com Professional Mobile DVR
9
Refresh the state table when search the other month. One time for one day.
【REC TYPE】press【OK】to select the type: All or Alarm. The default is ALL.
【CHANNEL SELECT】Press【OK】to select the channel:1/2/3/4 The default is CH1
【DATE】Press the digit keys to setup the date. The default is TODAY
【STARTS TIME】Press the digit keys to setup the time, default time is 00:00.
【END TIME】Press the digit keys to setup the end time, default time is 23:59.
【SEARCH】Select the "Search" button, press 【OK】, pop out the following search results
menu
Press the direction keys to view recording information, press【OK】to play, press【EXIT】
return to previous menu;
Press the direction keys to select "First", "Up", "Next", "Last", and press【OK】go to
corresponding page.
Press the direction keys to select “ALL ” REVERSE„‟ „‟BACKUP‟‟
2.4 System setup
Use left/right/up/down to select “system setup”, and press 【OK】key, enter the
www.szsinocam.com Professional Mobile DVR
10
following recording search menu
2.4.1Alarm setup
Alarm parameter
【Disk Invalid】when video storage fails, whether the alarm information occur. On/Off switch.
ON---Enable alarm input; OFF---Disable alarm input. Press【OK】to select.
【Space Unavailable】alarm information occurs when room for video storage is less than a
certain capacity and cycling record is “OFF”. Press【OK】to select.
【Video Lost】ON---Enable alarm recording; OFF---Disable alarm recording. Press 【OK】
to select.
Table des matières
